System Commands

System Commands

The following system commands are available:

Command	Description
reboot	Reboot the FortiDeceptor. All sessions will be terminated. The unit will go offline and there will be a delay while it restarts.
shutdown	Shutdown the FortiDeceptor.
config-reset	Reset the configuration to factory defaults. Event and incident data are kept. Installed VM images are also kept.
factory-reset	Reset the FortiDeceptor configuration to factory default settings. All data are deleted. Installed VM images are kept.
status	Display the FortiDeceptor firmware version, serial number, system time, disk usage, image status, and RAID information.
fw-upgrade	Upgrade or re-install the FortiDeceptor firmware or deception VM image via Secure Copy (SCP) or File Transfer Protocol (FTP) server. See fw-upgrade for details.
reset-widgets	Reset the GUI widgets.
iptables	Enable/disable IP tables. See iptables for details.
dcvm-confirm-id	Set confirm ID for Windows deception VM activation. See dcvm-confirm-id for details.
dcvm-license	List the license information for deception VMs using the `-l` option.
dcvm-status	Display the status for deception VMs.
dcvm-reset	Activate and initialize VM images again. Sometimes it is necessary to rebuild a VM image when it is broken. Optionally, specify a VM name with `-n <VM name>`, or all VMs will be reset.
dcimg-status	Display the status of deception images.
set-maintainer	Enable/disable the maintainer account. See set-maintainer for details.
remote-auth-timeout	Set Radius or LDAP authentication timeout value. See remote-auth-timeout for details.
log-purge	Delete all system logs.
vm-firmware-license	Download firmware license file from a server and install it. See vm-firmware-license for details.
vm-resize-hd	After changing the virtual hard disk size on the hypervisor, execute this command to make the change recognizable to the firmware. This command is only available for VM models.
dmz-mode	Enable/disable the DMZ mode to deploy the unit into the DMZ environment.
fdn-pkg	Display information about FortiGuard upgradeable engine packages.
test-network	Test the network connectivity of firmware.

System Commands

The following system commands are available:

Command	Description
reboot	Reboot the FortiDeceptor. All sessions will be terminated. The unit will go offline and there will be a delay while it restarts.
shutdown	Shutdown the FortiDeceptor.
config-reset	Reset the configuration to factory defaults. Event and incident data are kept. Installed VM images are also kept.
factory-reset	Reset the FortiDeceptor configuration to factory default settings. All data are deleted. Installed VM images are kept.
status	Display the FortiDeceptor firmware version, serial number, system time, disk usage, image status, and RAID information.
fw-upgrade	Upgrade or re-install the FortiDeceptor firmware or deception VM image via Secure Copy (SCP) or File Transfer Protocol (FTP) server. See fw-upgrade for details.
reset-widgets	Reset the GUI widgets.
iptables	Enable/disable IP tables. See iptables for details.
dcvm-confirm-id	Set confirm ID for Windows deception VM activation. See dcvm-confirm-id for details.
dcvm-license	List the license information for deception VMs using the `-l` option.
dcvm-status	Display the status for deception VMs.
dcvm-reset	Activate and initialize VM images again. Sometimes it is necessary to rebuild a VM image when it is broken. Optionally, specify a VM name with `-n <VM name>`, or all VMs will be reset.
dcimg-status	Display the status of deception images.
set-maintainer	Enable/disable the maintainer account. See set-maintainer for details.
remote-auth-timeout	Set Radius or LDAP authentication timeout value. See remote-auth-timeout for details.
log-purge	Delete all system logs.
vm-firmware-license	Download firmware license file from a server and install it. See vm-firmware-license for details.
vm-resize-hd	After changing the virtual hard disk size on the hypervisor, execute this command to make the change recognizable to the firmware. This command is only available for VM models.
dmz-mode	Enable/disable the DMZ mode to deploy the unit into the DMZ environment.
fdn-pkg	Display information about FortiGuard upgradeable engine packages.
test-network	Test the network connectivity of firmware.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

System Commands

System Commands

System Commands