Configuring the deployment network

To configure the FortiDeceptor ports in Azure:

1. In Azure, open the VM and go to Settings > Networking and select an IP configuration.

   

2. Configure the nic ports to map to a port in FortiDeceptor.

To configure the Azure ports in FortiDeceptor:

1. In FortiDeceptor Go to Deception > Deployment Network.
2. Verify that Azure appears in the Application column and the Status is Initialized.

Example:

In the images below:

• nic1 is mapped to port2 in FortiDeceptor
• nic3 is mapped to port3 in FortiDeceptor
• nic4 is mapped to port4 in FortiDeceptor
• nic5 is mapped to port5 in FortiDeceptor
• nic6 is mapped to port6 in FortiDeceptor

Azure VM > Settings > Network

FortiDeceptor Manager > Deployment Network.