Fortinet black logo

Release Notes

Home FortiDDoS-F 6.4.2 Release Notes
6.4.2
7.0.0
6.6.3
6.6.1
6.6.0
6.5.1
6.5.0
6.4.2
6.4.1
6.4.0
6.3.3
6.3.2
6.3.1
6.2.3
6.2.2
6.2.1
6.2.0
6.1.5
6.1.4
6.1.3
6.1.2
6.1.1
6.1.0

Upgrade notes

Upgrade notes

On the VM platform, to avoid the VMware network broadcast storm for the new deployment, each WAN/LAN interface pair is disabled by default so that traffic will not pass through.

In the initial deployment, please remember to enable the WAN/LAN interface pair via CLI.

# config system l2-interface-pair

# edit l2-port1-port2

# set status enable

# next

# end

Upgrading to 6.3.3 causes a 15s network outage, even if FortiDDoS Fail-Open is selected for appropriate traffic ports.

To avoid this, manually enter bypass before the upgrade

#: execute bypass-traffic enable

Select “y” at the prompt

Proceed with upgrade.

The bypass will be removed automatically when the system has rebooted and is operational.

Previous
Next

Upgrade notes

On the VM platform, to avoid the VMware network broadcast storm for the new deployment, each WAN/LAN interface pair is disabled by default so that traffic will not pass through.

In the initial deployment, please remember to enable the WAN/LAN interface pair via CLI.

# config system l2-interface-pair

# edit l2-port1-port2

# set status enable

# next

# end

Upgrading to 6.3.3 causes a 15s network outage, even if FortiDDoS Fail-Open is selected for appropriate traffic ports.

To avoid this, manually enter bypass before the upgrade

#: execute bypass-traffic enable

Select “y” at the prompt

Proceed with upgrade.

The bypass will be removed automatically when the system has rebooted and is operational.

Previous
Next