Saving the Juniper source configuration file
Before starting the conversion wizard, save a copy of your Juniper configuration file to the computer where FortiConverter is installed.
To get the configuration, for both ScreenOS and Junos, in the web UI, go to Configuration> Update > ConfigFile.
Alternatively, for ScreenOS only, you can use the get conf CLI command and paste the output into a plain text file.
For Junos, FortiConverter requires the structural configuration file as a valid input. For example:
show configuration
## Last commit: 2013-06-05 11:28:53 CST by master
version 10.2S7;
groups {
node0 {
system {
host-name SRX3400-Active;
backup-router 172.16.1.254 destination 0.0.0.0/0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 172.16.1.1/24;
}
}
}
}
}
............
............