Lucent Interface Mapping
You can manually map the interface.
- To select the appropriate FortiGate interface, click the value in the FortiGate Interface column, and then select a value or enter a custom interface name.
- To edit other values, double-click the proper column. Use the toolbar icon on the right to show and hide columns. You can also use the Tuning page to create mappings after the conversion is complete.
- To import a set of interface mappings from a file, click Import.
- To download the current set of interface mappings, click Export.
- To delete an interface, select the entry and click Delete Selected. It is useful if your target FortiGate has fewer interfaces than the source configuration.
For the VLAN and Loopback interface, FortiConverter automatically applies the interface name.
It doesn’t show on the page, if required, you can utilize the tuning page to modify the logical interface and zones. See .
|
Setting |
Description |
|---|---|
|
VDOM |
Show the virtual domains used in the conversion. |
|
Source Interface |
Show each interface on the Lucent firewall. |
|
FortiGate Interface |
Show the corresponding FortiGate interface. Click to assign a FortiGate port for each interface. |
|
Members |
Show any members if they are set. |
|
Mode/IP-Netmask |
Show the interface mode or the IP address and netmask of the connection. |
|
Type |
Show the type of interface. |
|
Access |
Show which protocols have permission to access each interface. |