You can use FortiClient to create a secure encrypted connection to protected applications without using VPN. Acting as a local proxy gateway, FortiClient works with the FortiGate application proxy feature to create a secure connection via HTTPS using a certificate received from EMS that includes the FortiClient UID. The FortiGate retrieves the UID to identify the device and check other endpoint information that EMS provides to the FortiGate, which can include other identity and posture information. The FortiGate allows or denies the access as applicable. See the FortiOS Administration Guide for FortiOS configuration requirements. For TCP forwarding to non-web-based applications, you must define ZTNA connection rules in FortiClient as follows.
For Linux devices, ZTNA certificate provisioning requires Trusted Platform Module 2.0.
FortiClient may receive ZTNA connection rules from EMS. See the FortiClient EMS Administration Guide.
You cannot use ZTNA connection rules and TCP forwarding on a Windows 7 endpoint.
- On the ZTNA Connection Rules tab, click Add Rule.
- In the Rule Name field, enter the desired name.
- In the Destination Host field, enter the IP address/FQDN and port of the destination host in the format <IP address or FQDN>:<port>. For example, you could enter demo.fortinet.com:22 as the destination host value.
- In the Proxy Gateway field, enter the FortiGate access IP address and port in the same format. For example, you could enter 184.108.40.206:80 as the proxy gateway value.
- From the Mode dropdown list, select Transparent.
- Enable or disable Encryption. By default, Encryption is disabled. When Encryption is enabled, traffic between FortiClient and the FortiGate is always encrypted, even if the original traffic has already been encrypted. When Encryption is disabled, traffic between FortiClient and the FortiGate is not encrypted.
- If desired, enable Use external browser as user-agent for saml user authentication. FortiClient can use a browser as an external user-agent to perform SAML authentication.
- Click Create.