Adding an SSL certificate to FortiClient EMS

You can add an SSL certificate to FortiClient EMS in one of the following ways:

Method	Description
Automated	The public Let's Encrypt certificate authority uses the Automated Certificate Management Environment (ACME), as defined in RFC 8555, to provide free SSL server certificates. You can configure FortiClient EMS to use certificates that are managed by Let's Encrypt and other certificate management services that use the ACME protocol.
Upload	Manually upload an SSL certificate.

To configure an automated SSL certificate in FortiClient EMS:

1. Go to System Settings > EMS Settings.
2. Ensure that Remote HTTPS access and Redirect HTTP request to HTTPS are enabled.
3. In the SSL certificate field, click the Import SSL certificate button.
4. Select Automated.
5. In the Domain field, enter the EMS fully qualified domain name (FQDN). For the Let's Encrypt server to issue the certificate, the public DNS server must resolve the EMS FQDN to the EMS public IP address.
6. In the Email field, enter a valid email address.
7. If desired, enable Auto Renew. When Auto Renew is enabled, FortiClient EMS automatically renews the certificate before expiry.
8. Select the checkbox to agree to Let's Encrypt's terms of service.
9. Click Import.

To manually upload an SSL certificate in FortiClient EMS:

1. Go to System Settings > EMS Settings.
2. In the SSL certificate field, click the Import SSL certificate button.
3. Select Upload.
4. In the Certificate field, browse to and select the desired certificate.
5. In the Certificate Password field, configure the desired password for the certificate.
6. Click Upload.