VPN options
The VPN <options> XML tag contains global information controlling VPN states:
<forticlient_configuration>
<vpn>
<options>
<current_connection_name>ssldemo</current_connection_name>
<current_connection_type>ssl</current_connection_type>
<autoconnect_tunnel></autoconnect_tunnel>
<autoconnect_only_when_offnet>0</autoconnect_only_when_offnet>
<keep_running_max_tries>0</keep_running_max_tries>
<save_password>0</save_password>
<minimize_window_on_connect>1</minimize_window_on_connect>
<allow_personal_vpns>1</allow_personal_vpns>
<disable_connect_disconnect>0</disable_connect_disconnect>
<show_vpn_before_logon>0</show_vpn_before_logon>
<use_windows_credentials>1</use_windows_credentials>
<use_legacy_vpn_before_logon>0</use_legacy_vpn_before_logon>
<show_negotiation_wnd>0</show_negotiation_wnd>
<disable_dead_gateway_detection>0</disable_dead_gateway_detection>
<vendor_id></vendor_id>
<disable_internet_check>0</disable_internet_check>
</options>
</vpn>
</forticlient_configuration>
The following table provides the XML tags for VPN options, as well as the descriptions and default values where applicable.
|
<current_connection_name>
|
The current connection's name, if any.
|
|
|
<current_connection_type>
|
Select the current connection's VPN type: [ipsec | ssl]
|
|
|
<autoconnect_tunnel>
|
Name of the configured IPsec VPN or SSL VPN tunnel to automatically connect to when FortiClient starts. Requires that the <save_password> tag be set to 1.
Boolean value: [0 | 1]
|
|
|
<autoconnect_only_when_offnet>
|
Autoconnect only when FortiClient is off-net.
Boolean value: [0 | 1]
|
0
|
|
<keep_running_max_tries>
|
The maximum number of attempts to make when retrying a VPN connection that was lost due to network issues. If this tag is set to 0, it retries indefinitely.
|
0
|
|
<save_password>
|
Save user-provided connection passwords.
Boolean value: [0 | 1]
|
0
|
|
<minimize_window_on_connect>
|
Minimize FortiClient after successfully establishing a connection.
Boolean value: [0 | 1]
|
1
|
|
<allow_personal_vpns>
|
Enable end users to create, modify, and use personal VPN configurations.
Boolean value: [0 | 1]
When this setting is configured as 0, FortiClient users are not be able to configure personal VPN connections. Only provisioned VPN connections are available to the user.
|
1
|
|
<use_legacy_vpn_before_logon>
|
Use the old VPN before logon interface.
Boolean value: [0 | 1]
|
1
|
|
<disable_connect_disconnect>
|
Enable or disable the Connect/Disconnect button when using Auto Connect with VPN.
Boolean value: [0 | 1]
|
0
|
|
<show_vpn_before_logon>
|
Allow user to select VPN connection from a list before logging into the system.
Boolean value: [0 | 1]
|
0
|
|
<use_windows_credentials>
|
Connect with the current username and password.
Boolean value: [0 | 1]
|
1
|
|
<show_negotiation_wnd>
|
Display information in FortiClient while establishing connections.
Boolean value: [0 | 1]
|
0
|
|
<disable_dead_gateway_detection>
|
Notifies Microsoft Windows OS to disable the detection of dead gateway. You may set this element to 1 if you observe that FortiClient IPsec VPN sends packets using an IP address other than those in the IP address pool assigned by the IPsec VPN server.
Boolean value: [0 | 1]
|
|
|
<vendor_id>
|
The default value is empty, signifying FortiClient should use its hard coded ID during IPsec.
|
|
|
<disable_internet_check>
|
When this setting is configured as 0, auto-connect VPN only starts when the Internet is accessible. When this setting is configured as 1, auto-connect VPN starts even if the Internet is not accessible.
Boolean value: [0 | 1]
|
0
|
