IP rules

The user logon information sent to FortiGate units can be restricted to specific IP addresses or address ranges. If no filters are defined, information is sent for all addresses.

When created, IP filtering rules must be assigned to FortiGate filters under Fortinet SSO > Filtering > FortiGate (see FortiGate for more information).

To view the list of the IP filtering rules, go to Fortinet SSO > Filtering > IP Rules.

To create new IP filtering rules:

1. From the IP filtering rules list, select Create New.

   The Create New IP Filtering Rule window opens.

   

2. Enter the following information:

   Name	Enter a name for the rule.
   Filter Mode	Either Include or Exclude the defined IPs in SSO.
   Filter Type	Select whether the rule will specify an IPv4 address and netmask, an IPv6 address range, or an IPv6 address.
   Rule	Enter either an IP address and netmask or an IP address range (depending on the selected filter type). For example: IPv4 address/mask: 10.0.0.1/255.255.255.0 IP range: 10.0.0.1/10.0.0.99 IPv6: 2001:db8:1ced:f00d::/128

3. Select Save to create the new IP filtering rule.