Configuring a zero trust tunnel example

For information on Zero Trust Network Access (ZTNA), see Zero Trust Network Access introduction in the FortiOS Admin Guide.

This example shows zero trust tunnel-related configuration for FortiAuthenticator.

For detailed zero trust tunnel configuration, including setting up a remote zero trust server, see the Setting up a zero trust tunnel recipe in the FortiAuthenticator Cookbook on the Fortinet Docs Library.

Configuring a zero trust tunnel on FortiAuthenticator

To configure a zero trust tunnel:

1. Go to System > Network > Zero Trust Tunnels.
2. Select Create New.

   The Create New Zero Trust Tunnel window opens.

3. In Name, enter a name for the zero trust tunnel.
4. In URL, enter the URL of the zero trust tunnel.
5. In the Client certificate dropdown, select a certificate.
6. Click OK.

Configuring an LDAP server with zero trust tunnel enabled on FortiAuthenticator

To configure an LDAP server:

1. Go to Authentication > Remote Auth. Servers > LDAP, and select Create New.
2. In Create New LDAP server:
   1. In Name, enter a name.
   2. Enable Use Zero Trust tunnel and from the dropdown select a zero trust tunnel.
   3. In Primary Server IP, enter the IP address of the server.
   4. In Port, enter the port number.
   5. In Base distinguished name, enter a base distinguished name.
   6. In Bind Type, select Regular.

      Enter the username and password for the LDAP user.

3. Click OK.