General settings

FortiAuthenticator units listen for requests from authentication clients and can poll Windows AD servers.

To configure FortiAuthenticator FSSO polling:

1. Go to Fortinet SSO Methods > SSO > General to open the Edit SSO Configuration window. The Edit SSO Configuration window contains sections for FortiGate, FSSO, and user group membership.
2. In the FortiGate section, configure the following settings:



Listening port	Leave at 8000 unless your network requires you to change this. Ensure this port is allowed through the firewall.
Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
Login expiry	The length of time, in minutes, that users can remain logged in before the system logs them off automatically. The default is 480 minutes (8 hours).
Extend user session beyond logoff by	The length of time, in seconds, that a user session is extended after the user logs off, from 0 (default) to 3600 seconds.
Enable NTLM authentication	Select to enable NTLM authentication, then enter the NETBIOS or DNS name of the domain that the login user belongs to in the User domain field.

3. In the Fortinet Single Sign-On (FSSO) section, configure the following settings:



Maximum concurrent user sessions		Enter the maximum number of concurrent FSSO login sessions a user is allowed to have. Use 0 for unlimited. Select Configure Per User/Group to configure the maximum number of concurrent sessions for each user or group. See Fine-grained controls.
Log level		Select one of Debug, Info, Warning, or Error as the minimum severity level of events to log from the dropdown menu. Select Download all logs to download all FSSO logs to your management computer.
Enable Windows event log polling (e.g. domain controllers/Exchange servers)		Select to enable Windows AD polling. This includes polling logon events from devices using Kerberos authentication or from Mac OS X systems. Select Configure Events to select the Windows security event IDs to use in event log polling. Select from event IDs 528, 540, 672, 673, 674, 680, 4624, 4768, 4769, 4770, and 4776.
	Enable DNS lookup to get IP from workstation name	Select to use DNS lookup to get IP address information when an event contains only the workstation name. This option is enabled by default.
	Directly use domain DNS suffix in lookup	Select to use the domain DNS suffix when doing a DNS lookup. This option is disabled by default.
	Enable reverse DNS lookup to get workstation name from IP	Select to enable reverse DNS lookup. Reverse DNS lookup is used when an event contains only an IP address and no workstation name. This option is enabled by default.
	Do one more DNS lookup to get full list of IPs after reverse lookup of workstation name	Reverse DNS lookup is used when an event contains only an IP address and no workstation name. Once the workstation name is determined, it is used in the DNS lookup again to get more complete IP address information. This is useful in environments where workstations have multiple network interfaces. This option is disabled by default.
	Include account name ending with $ (usually computer account)	Accounts that end in "$" used to exclusively denote computer accounts with no actual user, but in some cases, valid accounts imported from dated systems can feature them. This option is disabled by default.
Enable FortiNAC SSO		Select to enable the retrieval of SSO sessions from FortiNAC sources. Select Edit to choose one or more configured FortiNAC sources to use as SSO sources. Select Configure FortiNACs to be directed to configure FortiNAC sources (under System > Administration > FortiNACs). For more information, see FortiNACs.
Enable Radius Accounting SSO clients		Select to enable the detection of users sign-ons and sign-offs from incoming RADIUS accounting (Start, Stop, and Interim-Update) records.
Enable Syslog SSO		Select to enable Syslog SSO, and configure syslog sources.
Enable FortiClient SSO Mobility Agent Service		Select to enable single sign-on (SSO) by clients running FortiClient Endpoint Security. For more information, see FortiClient SSO Mobility Agent.
	FortiClient listening port	Enter the FortiClient listening port number.
	Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
	Keep-alive interval	Enter the duration between keep-alive transmissions, from 1 to 60 minutes. Default is 5 minutes.
	Idle timeout	Enter an amount of time in minutes after which to logoff a user if their status is not updated. The value cannot be lower than the Keep-alive interval value.
	Enable NTLM	Select to enable the NT LAN Manager (NTLM) to allow logon of users who are connected to a domain that does not have the FSSO DC Agent installed. Disable NTLM authentication only if your network does not support NTLM authentication for security or other reasons. Enter an amount of time after which NTLM authentication expires in the NTLM authentication expiry field, from 1 to 10080 minutes (7 days).
Enable hierarchical FSSO tiering		Select to enable hierarchical FSSO tiering. Enter the collector listening port in the Collector listening port field.
Enable DC/TS Agent Clients		Select to enable clients using DC or TS Agent. Enter the UDP port in the DC/TS Agent listening port field. Default is 8002.
	Require authentication for TS agents (disables DC agent support)	Select to require authentication, then enter a secret key, or password, in the Secret key field.
	Enable DNS lookup to get IP from workstation name	Select to use DNS lookup to get IP address information when a client contains only the workstation name. This option is enabled by default.
	Enable reverse DNS lookup to get workstation name from IP	Select to enable reverse DNS lookup. Reverse DNS lookup is used when a client contains only an IP address and no workstation name. This option is enabled by default.
Restrict auto-discovered domain controllers to configured Windows event log sources and remote LDAP servers		Select to enable restricting automatically discovered domain controllers to already configured domain controllers only. See Windows event log sources.
Enable Windows Active Directory workstation IP verification		Select to enable workstation IP verification with Windows Active Directory. If enabled, select Enable IP change detection via DNS lookup to detect IP changes via DNS lookup.
Disable NTLMv1 in client authentication to Windows AD server		Optionally disable NTLMv1, as NTLMv2 is supported.

4. In the User Group Membership section, configure the following settings:



Group cache mode		Select the group cache mode: Passive: Items have an expiry time after which the are removed and re-queried on the next logon. Active: Items are periodically updated for all currently logged on users.
	Group cache item lifetime	Enter the amount of time in minutes between 30-10080 (maximum of one week) after which items will expire (when Group cache mode is set to Passive), or the amount of time after which items will update for active logins (when Group cache mode is set to Active). Additionally, you can Clear cache (when in Passive), or manually Update cache (when in Active).
Do not use cached groups and always load groups from server for the following SSO sources		Select to prevent using cached groups and to always load groups from server for the following SSO sources: Windows event log polling RADIUS Accounting SSO Syslog SSO FortiClient SSO Mobility Agent DC Agent TS Agent User login portal SSO web service
Base distinguished names to search for nesting of users/groups into cross domain, domain local groups		Enter the base distinguished names to search for nesting of users or groups into cross domain and domain local groups.

5. Select OK to apply the settings.

Configuring FortiGate units for FSSO

Each FortiGate unit that will use FortiAuthenticator to provide Single Sign-On authentication must be configured to use FortiAuthenticator as an SSO server.

To configure SSO authentication on the FortiGate unit:

1. On the FortiGate unit, go to User & Device > Authentication > Single Sign-On and select Create New.
2. In the Type field, select Fortinet Single-Sign-On Agent.
3. Enter a name for FortiAuthenticator in the Name field.
4. In the Primary Agent IP/Name field, enter the IP address of FortiAuthenticator.
5. In the Password field, enter the secret key that you defined for FortiAuthenticator. See Enable authentication.
6. Select OK.

In a few minutes, the FortiGate unit receives a list of user groups from FortiAuthenticator. When you open the server, you can see the list of groups. The groups can be used in identity-based security policies.