cdb

Use the following commands for configuration database related settings.

cdb check

Use this command to check and repair configuration database.

Syntax

diagnose cdb check adom-revision [adom] [preview]

diagnose cdb check internet-service-name [adom]

diagnose cdb check update-devinfo logdisk-size [new value] [0 | 1] [model-name]

diagnose cdb check update-devinfo sslvpn-flag <devname>

Variable	Description
adom-revision [adom] [preview]	Check or remove invalid ADOM revision database. Optionally, preview the check before running it.
internet-service-name [adom]	Check mis-matched internet service name. Optinally, specify the ADOM.
update-devinfo logdisk-size [new value] [0 | 1] [model-name]	Update device log disk size. new value: Item new value. 0 | 1: update only empty values (default), or always update (1). model-name: Only update on model name (default: all models).
update-devinfo sslvpn-flag <devname>	Upgrade the device SSL-VPN flag on the specified device.

cdb manual-fix

Use this command to manually repair the configuration database.

Syntax

diagnose cdb manual-fix adom <adom> <repair action>

Variable	Description
adom <adom> <repair action>	Manually repair adom configuration database. Enter the ADOM name.

cdb upgrade

Use this command to upgrade and repair configuration database.

Syntax

diagnose cdb upgrade check <action>

diagnose cdb upgrade force-retry <action>

diagnose cdb upgrade log

diagnose cdb upgrade pending-list

diagnose cdb upgrade summary

Variable	Description
check <action>	Perform a check to see if upgrade and repair is necessary. resync-dev-vdoms - Resync and add any missing vdoms from device database to DVM database
force-retry <action>	Re-run an upgrade that was already performed in previous release.
log	Display the configuration database upgrade log.
pending-list	Display the list of upgrades scheduled for the next reboot.
summary	Display the firmware upgrade summary.