Fortinet black logo

Upgrade Guide

Home FortiAnalyzer 7.4.2 Upgrade Guide
7.4.2
7.4.2
7.4.1
7.4.0
7.2.5
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.12
7.0.11
7.0.10
7.0.9
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.14
6.4.13
6.4.12
6.4.11
6.4.10
6.4.9
6.4.8
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.12
6.2.11
6.2.10
6.2.9
6.2.8
6.2.7
6.2.6
6.2.5
6.2.3
6.2.2
6.2.1
6.2.0
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.6.11
5.6.10
5.6.9
5.6.8
5.6.7
5.6.6
5.6.5
5.6.4
5.6.3
5.6.2
5.6.1
5.6.0
5.4.7
5.4.6
5.4.5
5.4.4
5.4.3
5.4.2
5.4.1
5.4.0
5.2.10
5.2.9
5.2.7
5.2.6
5.2.5
5.2.4
5.2.3
5.2.2
5.0.13
5.0.12
5.0.11

Reviewing status of managed devices

Reviewing status of managed devices

Before starting an upgrade, use the Device Manager pane to review the status of all logging devices to ensure 0 devices have Status = Down.

Either correct devices that are Down or make note of them prior to starting the upgrade.

You can use the following CLI commands to review the status of managed devices. Use this command to check that device and ADOM disk quota are correct before and after the upgrade.

  • diagnose log device

This section contains the following topics:

Previous
Next

Reviewing status of managed devices

Before starting an upgrade, use the Device Manager pane to review the status of all logging devices to ensure 0 devices have Status = Down.

Either correct devices that are Down or make note of them prior to starting the upgrade.

You can use the following CLI commands to review the status of managed devices. Use this command to check that device and ADOM disk quota are correct before and after the upgrade.

  • diagnose log device

This section contains the following topics:

Previous
Next