central-management

Use this command to set or check the settings for central management.

Syntax

config system central-management

set type {fortimanager}

set allow-monitor {enable | disable}

set authorized-manager-only {enable | disable}

set fmg <string>

set enc-alogorithm {default | high | low}

set mgmtid <integer>

set serial-number <serial_number_string>

end

Variable	Description
type {fortimanager}	Type of management server (default = fortimanager).
allow-monitor {enable | disable}	Enable/disable remote monitoring of the device (default = enable).
authorized-manager-only {enable | disable}	Enable/disable restricted to authorize manager only setting (default = enable).
fmg <string>	Set the IP address or FQDN of the FortiManager (character limit = 31).
enc-alogorithm {default | high | low}	Set the SSL communication encryption algorithms: default: SSL communication with high and medium encryption algorithms (default) high: SSL communication with high encryption algorithms low: SSL communication with low encryption algorithms
mgmtid <integer>
serial-number <serial_number_string>	Set the device serial number. You can enter up to 5 serial numbers.

Use the show command to display the current configuration if it has been changed from its default value:

show system central-management