system interface
Use these commands to view interface configuration and status.
Syntax
get system interface
get system interface [interface name]
Examples
This example shows the output for get system interface:
== [ port1 ]
name: port1 status: enable ip: 111.11.11.11 255.255.255.0 speed: auto
== [ port2 ]
name: port2 status: enable ip: 0.0.0.0 0.0.0.0 speed: auto
== [ port3 ]
name: port3 status: enable ip: 0.0.0.0 0.0.0.0 speed: auto
== [ port4 ]
name: port4 status: enable ip: 0.0.0.0 0.0.0.0 speed: auto
This example shows the output for get system interface port1:
name : port1
status : enable
ip : 111.11.11.11 255.255.255.0
allowaccess : ping https ssh snmp soc-fabric http webservice fgfm
speed : auto
description : (null)
alias : (null)
mtu : 1500
type : physical
ipv6:
ip6-address: ::/0 ip6-allowaccess: ip6-autoconf: enable