Creating a custom event handler

You can create a custom event handler from scratch or clone a predefined event handler and customize its settings. See Cloning event handlers.

Configuring an event handler includes defining the following main sections:

Option	Description
Event handler attributes	Event handler attributes such as name, description, and devices.
Filters	Filters are rules for event generation. Select the log filters to limit the logs that trigger an event. Group the logs by primary and secondary (optional) values to separate the events that are generated for different Group By values. Set the number of occurrences within a time frame that triggers an event. Configure event fields such as event status and severity.
Additional Info	Specify what to show in the Additional Info column. You can use the system default information or configure a custom information message.
Notifications	Configure notifications to be sent on event generation. You can send alert notifications to a fabric connector, email address, SNMP community, or syslog server.

To create a new event handler:

1. Go to Incidents & Events/FortiSoC > Event Monitor > Event Handler List.
2. In the toolbar, click Create New.
3. Configure the settings as required and click OK.

   Field		Description
   Status		Enable or disable the event handler. Enabled event handlers have a Status of ON and show the icon in the Event Handler List. Disabled event handlers have a a Status of OFF and show the icon in the Event Handler List.
   Name		Add a name for the handler.
   Description		Type a description of the event handler.
   Devices		Select the devices to include. All Devices. Specify: To add devices, click the Add icon. Local Device: Select if the event handler is for local FortiAnalyzer event logs. This option is only available in the root ADOM and is used to query FortiAnalyzer event logs. For Local Device, the Log Type must be Event Log and Log Subtype must be Any.
   Subnets		Select All Subnets to include all subnets, or select Specify to choose which subnet(s) or subnet group(s) will be included or excluded from triggering events.
   Filters		Configure one or more filters for the handler. You can add multiple filters each with its own set of filter settings. You can enable or disable specific filters in an event handler.
   	Log Device Type	If you are in a Security Fabric ADOM, select the log device type from the dropdown list. If you are not in a Security Fabric ADOM, you cannot change the Log Device Type. The SIEM log device type can be used to generate alerts from SIEM logs when SIEM logs are available.
   	Log Type	Select the log type from the dropdown list. When Devices is set to Local Device, you cannot change the Log Type or Log Subtype.
   	Log Subtype	Select the category of event that this handler monitors. The available options depends on the platform type. This option is only available when Log Type is set to Event Log or Traffic Log.
   	Group By	Select how to group the events. Some Group By selections allow a secondary Group By option. If available, click Add beside the Group By field to add a secondary Group By option.
   	Logs match	Select All or Any of the following conditions.
   	Log Field	Select a log field to filter from the dropdown list. After the log device and log type are selected, the Log Field dropdown list will only include log fields that belong to the specified log type. For example, the Botnet IP log field is available when the Log Type is DNS, but not available when the Log Type is Event Log.
   	Match Criteria	Select a match criteria from the dropdown list. The available options depend on the selected log field. Some log fields, such as Source Port, will provide a variety of operators in the dropdown list, such as Equal To, Not Equal To, Greater Than or Equal To, Less Than or Equal To, Greater Than, and Less Than. Other log fields, such as Log Description, will be limited to Equal To and Not Equal To.
   	Value	Select a value from the dropdown list or enter a value in the text box. The available options depend on the selected log field. If there is no dropdown list provided by FortiAnalyzer, you must manually enter a value to find in the raw log. If a dropdown list is provided, you can select a value from the list. For some log fields, such as Level, the dropdown list also allows you to enter a custom value. If there is no textbox to enter a custom value in the dropdown list, you must use the Generic Text Filter instead.
   	Add	Add Log Field to the filter.
   	Remove	Delete the filter.
   	Generic Text Filter	Enter a generic text filter. For information on text format, hover the cursor over the help icon. The operator ~ means contains and !~ means does not contain. For more information on creating a generic text filter, see Using the Generic Text Filter in an event handler.
   	Generate alert when at least n Exact/Distinct matches occurred over a period of n minutes	Enter threshold values to generate alerts. Enter the number of matching Exact or Distinct events that must occur in the number of minutes to generate an alert. When Distinct is selected, you can further specify the alert criteria by indicating the field that must be distinct (for example, Source IPor Application).
   	Event Message	If you wish, enter a custom event message. The default message is the Group By value. You can use variables in the event message.
   	Event Status	Select Allow FortiAnalyzer to choose or select a status from the dropdown list: Unhandled, Mitigated, Contained, or Blank.
   	Event Severity	Select the severity from the dropdown list: Critical, High, Medium, or Low.
   	Tags	If you wish, enter custom tags. Tags can be used as a filter when using default or custom views.
   Additional Info		Specify what to show in the Additional Info column. You can use the system default information or configure a custom information message.
   	Use system default	Select to use the system default message in the Additional Info column.
   	Use custom message	Type a custom message for the Additional Info column. A custom message can include variables and log field names. For more information, click the question mark icon.
   Notifications		Configure alerts for the handler.
   	Send Alert through Fabric Connectors	Send an alert through one or more fabric connectors. Click the + button to add fabric connectors. For more information, see Fabric Connectors.
   	Send Alert Email	Send an alert by email. Specify email parameters including the mail server. For more information, see Mail Server.
   	Send SNMP(...) Trap	Select one or both checkboxes and specify an SNMP community or user from the dropdown list. Click the add icon to create a new SNMP community or user. For more information, see SNMP.
   	Send Alert to Syslog Server	Send an alert to the syslog server. Select a syslog server from the dropdown list. Click the add icon to create a new syslog server. For more information, see Syslog Server.
   	Send Each Alert Separately	Select to send each alert individually instead of in a group.