camera

Use this command to configure FortiRecorder camera settings.

This command is only available on hardware-based FortiAnalyzer models.

camera devices

Configure camera information. The available options will vary depending on the camera model selected.

Syntax

config fortirecorder camera devices

edit <device>

set addr <string>

set address-mode wired

set alarm-post <integer>

set alarm-pre <integer>

set audio-bitrate <integer>

set audio-codec <string>

set audio-detect-sensitivity

set audio-input {default | line | mic}

set audio-input-level <integer>

set audio-output

set audio-output-echo-cancel

set audio-output-level <integer>

set audio-output-mute

set audio-samplerate <integer>

set camera-type managed

set comm-http-port <integer>

set comm-https-port <integer>

set comm-type {http | https}

set digital-input

set digital-output

set exposure-environment {indoor | outdoor}

set exposure-gain-max

set exposure-shutter-min {2 | 4 | 8 | 15 | 30}

set exposure-wdr-digital {on | off | 1 | 2 | 3}

set exposure-wdr-shutter {off | 1 | 2}

set face-recognition {enable | disable}

set fw-version

set image-digital-zoom

set image-dis

set image-dnr {auto | manual | off}

set image-dnr-level <integer>

set index

set infrared-disable-threshold <integer>

set infrared-dwell-time

set infrared-enable-threshold <integer>

set infrared-led {auto | off}

set infrared-led-intensity {auto | fixed}

set infrared-led-level

set infrared-mode {auto | off}

set light-detection pir

set light-disable-threshold

set light-dwell-time

set light-enable-threshold

set light-mode

set location <string>

set login-password

set mac

set model-name <model>

set move-home

set move-home-delay <integer>

set move-home-pan <integer>

set move-home-tilt <integer>

set move-home-zoom <integer>

set operator-password

set overlay-mode {off | name time-date gmt}

set pir-sensitivity

set port <integer>

set privacy-button {enable | disable}

set profile <string>

set push-config {enable | disable}

set ready {enable | disable}

set status {enable | disable}

set status-led {enable | disable}

set tamper-detect-sensitivity

set transport-http-port <integer>

set transport-https-port <integer>

set transport-tcp-port <integer>

set transport-type {http | tcp | udp}

set transport-udp-port <integer>

set unready-state

set unready-state-detail

set vendor-name

set video-aspect {sd | hd}

set video-brightness <integer>

set video-contrast <integer>

set video-orientation {normal | vertical | horizontal | rotate-90 | rotate-180 | rotate-270}

set video-saturation <integer>

set video-sharpness <integer>

set view-angle

set wired-addr <ip4|ip6>

set wired-gateway <ip4|ip6>

set wired-mode {dhcp | static}

set wired-netmask <ip4|ip6>

set wired-primary-dns <ip4|ip6>

set wired-secondary-dns <ip4|ip6>

set zoom <integer>

config motion

edit <motion>

set motion-pixel <integer>

set motion-sensitivity <integer>

set motion-top <integer>

set motion-left <integer>

set motion-bottom <integer>

set motion-right <integer>

next

end

config mask

edit <mask>

set mask-top <integer>

set mask-left <integer>

set mask-bottom <integer>

set mask-right <integer>

next

end

config ptz-presets

edit <preset>

set pan <integer>

set tilt <integer>

set zoom <integer>

next

end

next

end

Variable	Description
<device>	Enter the name of the device you need to edit.
addr <string>	The camera address as configured on the camera.
address-mode wired	How that camera is reached.
alarm-post <integer>	Set the capture time after an alarm, in seconds (0 - 300, default = 30).
alarm-pre <integer>	Set the capture time before an alarm, in seconds (0 - 10, default = 10).
audio-bitrate <integer>	Set the audio bitrate (default = 64000). This option is only available for camera models that have audio capabilities.
audio-codec <string>	Set the audio codec. This option is only available for camera models that have audio capabilities.
audio-detect-sensitivity
audio-input {default | line | mic}	Set the audio input source. This option is only available for camera models that have audio input capabilities.
audio-input-level <integer>	Set the audio input level (1 - 100, default = 60). This option is only available for camera models that have audio input capabilities.
audio-output
audio-output-echo-cancel
audio-output-level <integer>	Set the audio output level (1 - 100, default = 60). This option is only available for camera models that have audio output capabilities.
audio-output-mute
audio-samplerate <integer>	Set the audio sample rate. This option is only available for camera models that have audio capabilities.
camera-type managed	The camera type.
comm-http-port <integer>	Set the command HTTP port (0 - 65535, default = 0).
comm-https-port <integer>	Set the command HTTPS port (0 - 65535, default = 0).
comm-type {http | https}	Set the command protocol (default = http).
digital-input
digital-output
exposure-environment {indoor | outdoor}	Set the exposure environment (default = indoor).
exposure-gain-max
exposure-shutter-min {2 | 4 | 8 | 15 | 30}	Set the minimum shutter speed. 2: 1/2 seconds (default) 4: 1/4 seconds 8: 1/8 seconds 15: 1/15 seconds 30: 1/30 seconds
exposure-wdr-digital {on | off | 1 | 2 | 3}	Turn on/off exposure digital wide dynamic, or set its value (default = off). The available options depend on the camera model.
exposure-wdr-shutter {off | 1 | 2}	Set the exposure digital wide dynamic shutter speed (default = off).
face-recognition {enable | disable}	Enable\disable facial recognition (default = disable).
fw-version
image-digital-zoom
image-dis
image-dnr {auto | manual | off}	Turn on/off image digital noise reduction (default = off).
image-dnr-level <integer>	Image Digital Noise Reduction (DNR) manual level (1 - 10, default = 1). This option is only available when image-dnr is manual.
index
infrared-disable-threshold <integer>	Set the infrared disable threshold (0 - 100, default = 15)
infrared-dwell-time	Set the infrared dwell time, in seconds (0 - 300, default = 5).
infrared-enable-threshold <integer>	Set the infrared enable threshold (0 - 100, default = 5)
infrared-led {auto | off}	Set the infrared LED status (default = auto).
infrared-led-intensity {auto | fixed}	Set the infrared LED intensity (default = auto).
infrared-led-level
infrared-mode {auto | off}	Configure infrared mode (default = auto). The available options depend on the camera model.
light-detection pir	Set light detection to Passive Infrared (PIR) sensor.
light-disable-threshold
light-dwell-time
light-enable-threshold
light-mode
location <string>	Set the camera location.
login-password
mac
model-name <model>	Set the camera model name.
move-home
move-home-delay <integer>	Set the amount of time of inactivity before the camera moves to its home position, in minutes (1 - 60, default = 5).
move-home-pan <integer>
move-home-tilt <integer>
move-home-zoom <integer>
operator-password
overlay-mode {off | name time-date gmt}	Set the text overlay mode (default = name time-date gmt}.
pir-sensitivity
port <integer>	Set the camera command port (0 - 65535, default = 0).
privacy-button {enable | disable}	Enable/disable the privacy button (default = disable).
profile <string>	Set the camera profile.
push-config {enable | disable}	Enable/disable pushing the configuration.
ready {enable | disable}
status {enable | disable}	Enable/disable the camera (default = enable).
status-led {enable | disable}	Enable/disable the LED on the camera (default = disable).
tamper-detect-sensitivity
transport-http-port <integer>	Set the HTTP transport port (0 - 65535, default = 0).
transport-https-port <integer>	Set the HTTPS transport port (0 - 65535, default = 0).
transport-tcp-port <integer>	Set the TCP transport port (0 - 65535, default = 0).
transport-type {http | https | tcp | udp}	Set the transport type to get media from the camera. The available options will vary depending on the camera model.
transport-udp-port <integer>	Set the UDP transport port (0 - 65535, default = 0).
unready-state
unready-state-detail
vendor-name
video-aspect {sd | hd}	Set the video aspect ration. The available options will vary depending on the camera model.
video-brightness <integer>	Set the video brightness (0 - 100, default = 50).
video-contrast <integer>	Set the video contrast (0 - 100, default = 50).
video-orientation {normal | vertical | horizontal | rotate-90 | rotate-180 | rotate-270}	Set the video orientation (default = normal).
video-saturation <integer>	Set the video saturation (0 - 100, default = 50).
video-sharpness <integer>	Set the video sharpness (0 - 100, default = 50).
view-angle
wired-addr <ip4|ip6>	Set the camera IP address. This option is only available when address-mode is wired and wired-mode is static.
wired-gateway <ip4|ip6>	Set the camera gateway. This option is only available when address-mode is wired and wired-mode is static.
wired-mode {dhcp | static}	Set the IP address assignment mode (default = dhcp).
wired-netmask <ip4|ip6>	Set the camera netmask. This option is only available when address-mode is wired and wired-mode is static.
wired-primary-dns <ip4|ip6>	Set the primary DNS. This option is only available when address-mode is wired and wired-mode is static.
wired-secondary-dns <ip4|ip6>	Set the secondary DNS. This option is only available when address-mode is wired and wired-mode is static.
zoom <integer>	Set the zoom level (0 - 100, default = 0)
Variables for config motion subcommand:
<motion>	Enter the motion number (0 - 100).
motion-pixel <integer>	Set the pixel percentage change for motion detection (0 - 100, default = 10).
motion-sensitivity <integer>	Set the sensitivity for motion detection (0 - 100, default = 80).
motion-top <integer>	Set the top percentage of the motion detection window (0 - 100, default = 0).
motion-left <integer>	Set the left percentage of the motion detection window (0 - 100, default = 0).
motion-bottom <integer>	Set the bottom percentage of the motion detection window (0 - 100, default = 100).
motion-right <integer>	Set the right percentage of the motion detection window (0 - 100, default = 100).
Variables for config mask subcommand:
<mask>	Enter the mask number (0 - 100).
mask-top <integer>	Set the top percentage of privacy mask (0 - 100, default = 0).
mask-left <integer>	Set the left percentage of privacy mask (0 - 100, default = 0).
mask-bottom <integer>	Set the bottom percentage of privacy mask (0 - 100, default = 100).
mask-right <integer>	Set the right percentage of privacy mask (0 - 100, default = 100).
Variables for config ptz-presets subcommand:
<preset>	Enter the preset name.
pan <integer>	Set the pan value (default = 0).
tilt <integer>	Set the pan value (default = 0).
zoom <integer>	Set the pan value (default = 0).

camera profile

Configure camera profiles.

Syntax

config fortirecorder camera profile

edit <profile>

set continuous-retention-disposition {delete | keep}

set continuous-retention-period <integer>

set continuous-retention-period-units {days | hours | weeks | months | years}

set detection-retention-disposition {delete | keep | virtual}

set detection-retention-period <integer>

set detection-retention-period-units {days | hours | weeks | months | years}

config recording-schedule

edit <schedule>

set record-type {continuous motion-detect | none}

set store-on

set temporary-stream-for-video-clips {if-needed | no | yes}

next

end

config video-schedule

edit <schedule>

set recording-stream <string>

set viewing-stream <string>

next

end

next

end

Variable	Description
<profile>	Enter the profile name of the entry you need to edit or type a new name to create a new profile (character limit = 127).
continuous-retention-disposition {delete | keep}	Keep or delete continuous recordings (default = keep).
continuous-retention-period <integer>	The period to keep continuous recordings (0 = forever, default = 1). This option is only available when continuous-retention-disposition is delete.
continuous-retention-period-units {days | hours | weeks | months | years}	The period unit for continuous recording retention (default = months). This option is only available when continuous-retention-disposition is delete.
detection-retention-disposition {delete | keep | virtual}	Keep or delete detection recordings (default = keep).
detection-retention-period <integer>	The period to keep detection recordings (0 = forever, default = 1). This option is only available when detection-retention-disposition is delete.
detection-retention-period-units {days | hours | weeks | months | years}	The period unit for detection recording retention (default = months). This option is only available when detection-retention-disposition is delete.
Variables for config recording-schedule subcommand:
<schedule>	Select a schedule. To create a schedule use the config fortirecorder schedule command.
record-type {continuous motion-detect | none}	Set the recording type (default = continuous).
store-on
temporary-stream-for-video-clips {if-needed | no | yes}	Use a temporary stream for video clip creation (default = if-needed).
Variables for config video-schedule subcommand:
<schedule>	Select a schedule. To create a schedule use the config fortirecorder schedule command.
recording-stream <string>	Select the video profile for the recording stream.
viewing-stream <string>	Select the video profile for the viewing stream.

camera video

Configure camera video profiles.

Syntax

config fortirecorder camera video profile

edit <profile>

set audio {enable | disable}

set video-bitrate-mode {fixed | variable}

set video-codec {default | h264 | h265}

set video-fps <integer>

set video-quality {extra-high | high | normal | low | extra-low}

set video-resolution {1mp | 2mp | 3mp | 4mp | 5mp | 6mp | extra-high | half_mp | high | low | medium}

next

end

Variable	Description
audio {enable | disable}	Enable/disable audio (default = disable).
video-bitrate-mode {fixed | variable}	Set the bitrate mode (default = variable).
video-codec {default | h264 | h265}	Set the video codec (default = default).
video-fps <integer>	Set the frames per second (FPS) of the video (1 - 60, default = 30).
video-quality {extra-high | high | normal | low | extra-low}	Set the video quality (default = extra-high).
video-resolution {1mp | 2mp | 3mp | 4mp | 5mp | 6mp | extra-high | half_mp | high | low | medium}	Set the video resolution (default = medium).