central-management
Use this command to set or check the settings for central management.
Syntax
config system central-management
set type {fortimanager}
set allow-monitor {enable | disable}
set authorized-manager-only {enable | disable}
set serial-number <serial_number_string>
set fmg <string>
set enc-alogorithm {default | high | low}
end
|
Variable |
Description |
|---|---|
|
type {fortimanager} |
Type of management server (default = fortimanager). |
|
allow-monitor {enable | disable} |
Enable/disable remote monitoring of the device (default = enable). |
|
authorized-manager-only {enable | disable} |
Enable/disable restricted to authorize manager only setting (default = enable). |
|
serial-number <serial_number_string> |
Set the device serial number. You can enter up to 5 serial numbers. |
|
fmg <string> |
Set the IP address or FQDN of the FortiManager (character limit = 31). |
|
enc-alogorithm {default | high | low} |
Set the SSL communication encryption algorithms:
|
Use the show command to display the current configuration if it has been changed from its default value:
show system central-management