Downloading MIB files for SNMP

If you are not using SNMP to monitor equipment, you can skip this procedure.

If you are using SNMP to monitor equipment, download the following MIB files from the Fortinet Customer Service & Support portal:

• FORTINET-FORTIMANAGER-FORTIANALYZER-MIB.mib, which is used with both FortiManager and FortiAnalyzer
• Fortinet Core MIB file, which is used with all Fortinet products

To download SNMP MIB files:

1. Log in to the Fortinet Customer Service & Support portal at https://support.fortinet.com.
2. Go to Download > Firmware Images.
3. In the Select Product dropdown list, select FortiAnalyzer.
4. Download the MIB file for the FortiAnalyzer 6.0.7 release:
   1. On the Download tab, go to the v6.00 > 6.0 > 6.0.7 > MIB folder.
   2. Download the MIB file by clicking the HTTPS link.

      An HTTPS connection is used to download the firmware image.

   3. Click the Checksum link for the image that you downloaded.

      The image file name and checksum code are displayed in the Get Checksum Code dialog box.

   4. Confirm that the checksum of the downloaded image file matches the checksum provided on the download site.
5. Download the Fortinet Core MIB file:
   1. On the Download tab, go to the v6.00 > Core MIB folder.
   2. Download the MIB file by clicking the HTTPS link.

      An HTTPS connection is used to download the firmware image.

   3. Click the Checksum link for the image that you downloaded.

      The image file name and checksum code are displayed in the Get Checksum Code dialog box.

   4. Confirm that the checksum of the downloaded image file matches the checksum provided on the download site.