get router info6 ospf6 status

Use this command to retrieve the status details of the OSPFv3 router.

Syntax

get router info6 ospf6 status

Example

FortiADC1 # get router info6 ospf6 status
 OSPFv3 Routing Process (0) with Router-ID 0.0.0.1
 Running 01:24:49
 Initial SPF scheduling delay 0 millisec(s)
 Minimum hold time between consecutive SPFs 50 millsecond(s)
 Maximum hold time between consecutive SPFs 5000 millsecond(s)
 Hold time multiplier is currently 1
 SPF algorithm has not been run$
 SPF timer is inactive
 Number of AS scoped LSAs is 1
 Number of areas in this router is 1
 
 Area 1.1.1.1
     Number of Area scoped LSAs is 4
     Interface attached to this area: port3