Listen on interface/port

The listen port means the port used for communication for GLB and SLB server. The GLB listen port is 5858 by default. User can change to other port from 1 to 65535.

Before you begin:

• You must have read-write permission for global load balancing settings.

Syntax

config global-load-balance setting

set listen-on-all-interfaces {enable|disable}

set ipv4-accessed-status {enable|disable}

set ipv6-accessed-status {enable|disable}

set port <integer>

end

listen-on-all-interfaces	Enable/disable IPv4/IPv6 network accessed status on all interfaces.
port	listen-on-port
ipv4-accessed-status	Enable/disable listening for DNS requests on the interface IPv4 address.
ipv6-accessed-status	Enable/disable listening for DNS requests on the interface IPv6 address.

Example

FortiADC-VM (setting) # get

ipv6-accessed-status: enable

ipv4-accessed-status: enable

listen-on-all-interface : enable

port : 5858

FortiADC-VM (setting) # set port 5858

FortiADC-VM (setting) # end