Configuring location lists

A location list configuration consists of a list of locations you select.

To configure a location list:

1. Go to Global Load Balance > FQDN.
2. Click the Location List tab.
3. Complete the configuration as described in Location List settings.
4. Click Save.

Location List settings

Settings	Guidelines
Name	Specify a unique name for the location list.
GEO IP List	Create a GEO IP list: Click inside the box. Select an option from the drop-down list menu. Repeat Steps 1 and 2 to add more locations to the list. Note: To remove an entry off your list, click the corresponding x sign.

Note: Starting from FortiADC 5.x.x, the GUI shows the full country or region names listed in alphabetical order for location list and data center configuration. The Console uses country or region name abbreviations instead. The abbreviations are done in accordance with the ISO standards. So if you configure a location list or data center from the Console, be sure to consult ISO-3166-1 and/or ISO 3166-2:CN for the correct abbreviations to use. See the following example commands:

config global-load-balance topology

edit "tp1"

set member ZZ US CN65

next

end

Where ZZ stands for Reserved, US for United States, and CN65 for China, Xingjiang