get system ha-status
Use this command to display ha status information including:
- Mode
- State
- Sync status and sync statistics
- Serial number
- Node ID
- IP address
- Monitor status
- Peer count
Syntax
get system ha-status
Example
(M) FADC-VM (global) # get system ha-status
Mode: active-active
State: primary
Config-sync: In sync (not sync)
Serial-number: FADV010000039883
Node-id: 1
IP address: 169.254.3.131
Last change time: Tue Mar 15 15:39:42 2016
Last change reason: Device initialization
Monitor status
System Harddisk: pass
Link Up: port1
Down: port2
Remote IP
Up:
Down:
Sync statistics: Sent Received
L4 session and persistence sync pkts: 0 0
L7 persistence sync pkts: 0 0
Device management errors:
Duplicate node id: 0
Version mismatch: 0
Peer count: 1
State: secondary(working)
Serial-number: FADV010000039890
Node-id: 2
IP address: 169.254.122.212