diagnose hardware sysinfo

Use this command to display system information that might be useful in debugging.

Syntax

diagnose hardware {get|set} sysinfo {cpu | interrupts | iomen | ioports | memory | mtrr | slab | stream | df>

cpu	Display detailed information for all CPU.
interrupts	Display system interrupt information.
iomem	Display the memory map of I/O ports.
ioports	Display the address list of I/O ports.
memory	Display system memory information.
mttr	Display the memory type range register.
slab	Display memory allocation information.
stream	Display STREAM benchmark results.
df	Display disk free information.

Example

FortiADC-VM # diagnose hardware get sysinfo ?

cpu display detailed information for all installed CPU(s)

interrupts display system interrupts information

iomem display the memory map of I/O ports

ioports display the address list of I/O ports

memory display system memory information

mtrr display the memory type range register

slab display memory allocation information

stream display STREAM benchmark results

df display disk free information

FortiADC-VM # diagnose hardware get sysinfo df

Filesystem Size Used Available Use% Mounted on

/dev/root 193.7M 141.6M 52.1M 73% /

none 0 0 0 0% /proc

none 0 0 0 0% /sys

none 0 0 0 0% /sys/kernel/debug

none 256.0M 7.6M 248.4M 3% /tmp

none 0 0 0 0% /dev/pts

none 256.0M 0 256.0M 0% /dev/shm

/dev/sda2 96.8M 68.8M 23.1M 75% /data

/dev/sdb1 23.5G 1.3G 21.0G 6% /var/log

/dev/sda3 378.3M 10.1M 348.7M 3% /home

/dev/loop0 984.3M 35.2M 899.1M 4% /var/log/debug