Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • CLI Reference

    Home FortiADC 6.2.2 CLI Reference
    6.2.2
    7.6.0
    7.4.5
    7.4.4
    7.4.3
    7.4.2
    7.4.1
    7.4.0
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.1.4
    7.1.3
    7.1.2
    7.1.1
    7.1.0
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.2.6
    6.2.5
    6.2.4
    6.2.3
    6.2.2
    6.2.1
    6.2.0
    6.1.6
    6.1.5
    6.1.4
    6.1.3
    6.1.2
    6.1.1
    6.1.0
    6.0.2
    6.0.1
    6.0.0
    5.4.5
    5.4.3
    5.4.2
    5.4.1
    5.4.0
    5.3.0
    4.8.1
    4.7.0

    Subcommands

    Subcommands

    Once you connect to the CLI, you can enter commands.

    Each command line consists of a command word that is usually followed by words for the configuration data or other specific item that the command uses or affects, for example:

    get system admin

    Subcommands are available from within the scope of some commands.When you enter a subcommand level, the command prompt changes to indicate the name of the current command scope. For example, after entering:

    config system admin

    the command prompt becomes:

    (admin)#

    Applicable subcommands are available to you until you exit the scope of the command, or until you descend an additional level into another subcommand.

    For example, the edit subcommand is available only within a command that affects tables; the next subcommand is available only from within the edit subcommand:

    config system interface

    edit port1

    set status up

    next

    end

    Available subcommands vary by command.From a command prompt within config, two types of subcommands might become available:

    Subcommand scope is indicated in this CLI Reference by indentation. See Indentation.

    Syntax examples for each top-level command in this CLI Reference do not show all available subcommands. However, when nested scope is demonstrated, you should assume that subcommands applicable for that level of scope are available.

    Table commands

    The following table describes commands used to manage configuration tables that contain sets of members or sets of rules, for example.

    Commands for tables

    delete <table_name>

    Remove a table from the current object.

    For example, in config system admin, you could delete an administrator account named newadmin by typing delete newadmin and pressing Enter. This deletes newadmin and all its fields, such as newadmin’s first-name and email-address.

    delete is only available within objects containing tables.

    edit <table_name>

    Create or edit a table in the current object.

    For example, in config system admin:

    • edit the settings for the default admin administrator account by typing edit admin.
    • add a new administrator account with the name newadmin and edit newadmin‘s settings by typing edit newadmin.

    edit is an interactive subcommand: further subcommands are available from within edit.

    edit changes the prompt to reflect the table you are currently editing.

    edit is only available within objects containing tables.

    end

    Save the changes to the current object and exit the config command. This returns you to the top-level command prompt.

    get

    List the configuration of the current object or table.

    In objects, get lists the table names (if present), or fields and their values.

    In a table, get lists the fields and their values.

    For more information on get commands, see get.

    purge

    Remove all tables in the current object.

    For example, in config user local-user, you could type get to see the list of all local user names, then type purge and then y to confirm that you want to delete all users.

    purge is only available for objects containing tables.

    Caution: Back up the FortiADC appliance before performing a purge because it cannot be undone. To restore purged tables, the configuration must be restored from a backup.

    Caution: Do not purge system interface or system admin tables. This can result in being unable to connect or log in, requiring the FortiADC appliance to be formatted and restored.

    show

    Display changes to the default configuration. Changes are listed in the form of configuration commands.

    For more information on show commands, see show.

    Example of table commands

    From within the system admin object, you might enter:

    edit admin_1

    The CLI acknowledges the new table, and changes the command prompt to show that you are now within the admin_1 table:

    new entry 'admin_1' added

    (admin_1)#

    Field commands

    The following table describes commands to manage field settings.

    Commands for fields

    abort

    Exit both the edit and/or config commands without saving the fields.

    end

    Save the changes made to the current table or object fields, and exit the config command. (To exit without saving, use abort instead.)

    get

    List the configuration of the current object or table.

    In objects, get lists the table names (if present), or fields and their values.

    In a table, get lists the fields and their values.

    next

    Save the changes you have made in the current table’s fields, and exit the edit command to the object prompt. (To save and exit completely to the root prompt, use end instead.)

    next is useful when you want to create or edit several tables in the same object, without leaving and re-entering the config command each time.

    next is only available from a table prompt; it is not available from an object prompt.

    set <field_name> <value>

    Set a field’s value.

    For example, in config system admin, after typing edit admin, you could type set password newpass to change the password of the admin administrator to newpass.

    Note: When using set to change a field containing a space-delimited list, type the whole new list. For example, set <field> <new‑value> will replace the list with the <new-value> rather than appending <new-value> to the list.

    show

    Display changes to the default configuration. Changes are listed in the form of configuration commands.

    unset <field_name>

    Reset the table or object’s fields to default values.

    For example, in config system admin, after typing edit admin, typing unset password resets the password of the admin administrator account to the default (in this case, no password).

    Example of field commands

    From within the admin_1 table, you might enter the following command to assign the value my1stExamplePassword to the password field:

    set password my1stExamplePassword

    You might then enter the next command to save the changes and edit the next administrator’s table.

    Previous
    Next

    Subcommands

    Subcommands

    Once you connect to the CLI, you can enter commands.

    Each command line consists of a command word that is usually followed by words for the configuration data or other specific item that the command uses or affects, for example:

    get system admin

    Subcommands are available from within the scope of some commands.When you enter a subcommand level, the command prompt changes to indicate the name of the current command scope. For example, after entering:

    config system admin

    the command prompt becomes:

    (admin)#

    Applicable subcommands are available to you until you exit the scope of the command, or until you descend an additional level into another subcommand.

    For example, the edit subcommand is available only within a command that affects tables; the next subcommand is available only from within the edit subcommand:

    config system interface

    edit port1

    set status up

    next

    end

    Available subcommands vary by command.From a command prompt within config, two types of subcommands might become available:

    Subcommand scope is indicated in this CLI Reference by indentation. See Indentation.

    Syntax examples for each top-level command in this CLI Reference do not show all available subcommands. However, when nested scope is demonstrated, you should assume that subcommands applicable for that level of scope are available.

    Table commands

    The following table describes commands used to manage configuration tables that contain sets of members or sets of rules, for example.

    Commands for tables

    delete <table_name>

    Remove a table from the current object.

    For example, in config system admin, you could delete an administrator account named newadmin by typing delete newadmin and pressing Enter. This deletes newadmin and all its fields, such as newadmin’s first-name and email-address.

    delete is only available within objects containing tables.

    edit <table_name>

    Create or edit a table in the current object.

    For example, in config system admin:

    • edit the settings for the default admin administrator account by typing edit admin.
    • add a new administrator account with the name newadmin and edit newadmin‘s settings by typing edit newadmin.

    edit is an interactive subcommand: further subcommands are available from within edit.

    edit changes the prompt to reflect the table you are currently editing.

    edit is only available within objects containing tables.

    end

    Save the changes to the current object and exit the config command. This returns you to the top-level command prompt.

    get

    List the configuration of the current object or table.

    In objects, get lists the table names (if present), or fields and their values.

    In a table, get lists the fields and their values.

    For more information on get commands, see get.

    purge

    Remove all tables in the current object.

    For example, in config user local-user, you could type get to see the list of all local user names, then type purge and then y to confirm that you want to delete all users.

    purge is only available for objects containing tables.

    Caution: Back up the FortiADC appliance before performing a purge because it cannot be undone. To restore purged tables, the configuration must be restored from a backup.

    Caution: Do not purge system interface or system admin tables. This can result in being unable to connect or log in, requiring the FortiADC appliance to be formatted and restored.

    show

    Display changes to the default configuration. Changes are listed in the form of configuration commands.

    For more information on show commands, see show.

    Example of table commands

    From within the system admin object, you might enter:

    edit admin_1

    The CLI acknowledges the new table, and changes the command prompt to show that you are now within the admin_1 table:

    new entry 'admin_1' added

    (admin_1)#

    Field commands

    The following table describes commands to manage field settings.

    Commands for fields

    abort

    Exit both the edit and/or config commands without saving the fields.

    end

    Save the changes made to the current table or object fields, and exit the config command. (To exit without saving, use abort instead.)

    get

    List the configuration of the current object or table.

    In objects, get lists the table names (if present), or fields and their values.

    In a table, get lists the fields and their values.

    next

    Save the changes you have made in the current table’s fields, and exit the edit command to the object prompt. (To save and exit completely to the root prompt, use end instead.)

    next is useful when you want to create or edit several tables in the same object, without leaving and re-entering the config command each time.

    next is only available from a table prompt; it is not available from an object prompt.

    set <field_name> <value>

    Set a field’s value.

    For example, in config system admin, after typing edit admin, you could type set password newpass to change the password of the admin administrator to newpass.

    Note: When using set to change a field containing a space-delimited list, type the whole new list. For example, set <field> <new‑value> will replace the list with the <new-value> rather than appending <new-value> to the list.

    show

    Display changes to the default configuration. Changes are listed in the form of configuration commands.

    unset <field_name>

    Reset the table or object’s fields to default values.

    For example, in config system admin, after typing edit admin, typing unset password resets the password of the admin administrator account to the default (in this case, no password).

    Example of field commands

    From within the admin_1 table, you might enter the following command to assign the value my1stExamplePassword to the password field:

    set password my1stExamplePassword

    You might then enter the next command to save the changes and edit the next administrator’s table.

    Previous
    Next