Using the Geo IP allowlist
To configure a Geo IP allowlist:
- Go to Network Security > Geo IP Protection.
- Click the Allowlist tab to create a allowlist as described in Geo IP allowlist configuration.
- Click Save.
| Settings | Guidelines |
|---|---|
|
Name |
Configuration name. The name can be up to 35 characters long. Valid characters are After you initially save the configuration, you cannot edit the name. |
|
Description |
A string to describe the purpose of the configuration, to help you and other administrators more easily identify its use. |
|
Status |
Enable/disable the exception. You might have occasion to toggle the exception off and on. |
|
Member |
|
|
Type |
Select and configure either of the following: IP Subnet—Specify the IP address and CIDR-formatted subnet mask, separated by a forward slash ( / ), such as 192.0.2.0/24. Dotted quad formatted subnet masks are not accepted. IPv6 addresses are not supported. IP Range—Specify the Start IP and the End IP addresses of the IP range. |
|
Description |
Enter a brief description of the IP subnet or IP range, depending on which Type you choose. The description can be up to 1023 characters long. Valid characters are |