config system tunneling

Use this command to configure the proxy server for FortiADC VMs that do not have access to Internet, and therefore cannot connect to the FortiGuard Distribution Network (FDN) to validate its license. Be sure to enable the set override-server-status when using this feature..

Before you begin, make sure you have read-write permission for system settings.

Syntax

config system tunneling

set address <proxy_address>

set password <password>

set port <proxy_port>

set status {enable | disable}

set username

end

status	Enable/disable Web proxy tunneling for FDN. Disabled by default.
address	Web proxy IP address.
port	Web proxy port.
username	The username for Web proxy authentication.
password	The password for Web proxy authentication.

Example

FortiADC-VM # config system fortiguard

FortiADC-VM (fortiguard) # set tunneling-status enable

FortiADC-VM (fortiguard) # set tunneling-address 1.1.1.101

FortiADC-VM (fortiguard) # set tunneling-port 808

FortiADC-VM (fortiguard) # set tunneling-username user1

FortiADC-VM (fortiguard) # set tunneling-password 123

FortiADC-VM (fortiguard) # set override-server-status enable

FortiADC-VM (fortiguard) # set override-server-address 62.209.40.78

FortiADC-VM (fortiguard) # end