local-in-policy6
Use this command to edit the configuration of an IPv6 local-in policy.
Syntax
config system local-in-policy6
edit <id>
set action {accept | drop | reject}
set dport <integer>
set dst <ip&netmask>
set intf <string>
set protocol {tcp | tcp_udp | udp}
set src <ip&netmask>
end
end
|
Variable |
Description |
|---|---|
|
<id> |
Set the entry number. |
|
action {accept | drop | reject} |
Select the action to be performed on the traffic matching this policy:
|
|
dport <integer> |
Enter the destination port number (0 for all, default = 0). |
|
dst <IPv6 prefix> |
Enter the destination IPv6 address and prefix (default = ::/0). |
|
intf <string> |
Enter a name for the incoming interface. Enter port1, port2, port3....port10. |
|
protocol {tcp | tcp_udp | udp} |
Set the traffic protocol:
|
|
src <IPv6 prefix> |
Enter the source IPv6 address and prefix (default = ::/0). |