Configuration synchronization
Configuration synchronization provides redundancy and load balancing among the cluster units. A FortiAnalyzer HA cluster synchronizes the configuration of the following modules to all cluster units:
- Device Manager
- Incidents & Events
- Reports
- Most System Settings
FortiAnalyzer HA synchronizes most System Settings in the HA cluster. The following table shows which System Setting configurations are synchronized:
|
System Setting |
Configuration synchronized |
|---|---|
|
Dashboard |
Only Administrative Domain is synchronized. All other settings in the System Information widget are not synchronized. |
|
ADOMs, including Storage Info |
Yes |
|
Administrators |
Yes |
|
Admin Profiles |
Yes |
|
Remote Authentication Server |
Yes |
|
Fabric Management |
No |
|
SAML SSO |
Yes |
|
Admin Settings |
Yes |
|
HA |
No |
|
Network > Interface |
No |
|
Network > DNS |
No |
|
Network > Routing Table |
No |
|
Network > Packet Capture |
No |
|
Network > SNMP |
Yes |
|
Event Logs |
No |
|
Certificates > Local Certificate |
No |
|
Certificates > CA Certificate |
Yes |
|
Certificates > CRL |
Yes |
|
Certificates > Remote CA Certificate |
Yes |
|
Advanced > Log Forwarding |
Yes |
|
Advanced > Logging Topology |
Yes |
|
Advanced > Device Log Settings |
Yes |
|
Advanced > Mail Server |
Yes |
|
Advanced > Syslog Server |
Yes |
|
Advanced > Meta Fields |
Yes |
|
Advanced > Log Fetch |
Yes |
|
Advanced > Task Monitor |
Yes |
|
Advanced > Misc Settings |
Yes |