config system storage

Configure logical storage.

config system storage
    Description: Configure logical storage.
    edit <name>
        set device {string}
        set media-status [enable|disable|...]
        set order {integer}
        set partition {string}
        set size {integer}
        set status [enable|disable]
        set usage [log|wanopt]
        set wanopt-mode [mix|wanopt|...]
    next
end

config system storage

Parameter	Description	Type	Size	Default
device	Partition device.	string	Maximum length: 19	?
media-status	The physical status of current media.	option	-	disable
	Option Description enable Storage is enabled. disable Storage is disabled. fail Storage have some fail sector.
name	Storage name.	string	Maximum length: 35	default_n
order	Set storage order.	integer	Minimum value: 0 Maximum value: 255	0
partition	Label of underlying partition.	string	Maximum length: 16	<unknown>
size	Partition size.	integer	Minimum value: 0 Maximum value: 4294967295	0
status	Enable/disable storage.	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
usage *	Use hard disk for logging or WAN Optimization.	option	-	log **
	Option Description log Use hard disk for logging. wanopt Use hard disk for WAN Optimization.
wanopt-mode *	WAN Optimization mode.	option	-	mix
	Option Description mix Use hard disk for WAN Optimization mix mode. wanopt Use hard disk for WAN Optimization wanopt mode. webcache Use hard disk for WAN Optimization webcache mode.

* This parameter may not exist in some models.

** Values may differ between models.