config switch-controller flow-tracking
|
This command is available for model(s): FortiGate 1000D, FortiGate 1000F, FortiGate 1001F, FortiGate 100F, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 120G, FortiGate 121G, FortiGate 1800F, FortiGate 1801F, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 201E, FortiGate 201F, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 2600F, FortiGate 2601F, FortiGate 3000D, FortiGate 3000F, FortiGate 3001F, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3200F, FortiGate 3201F, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F, FortiGate 3501F, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3700F, FortiGate 3701F, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 400F, FortiGate 401E, FortiGate 401F, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F, FortiGate 4400F, FortiGate 4401F, FortiGate 500E, FortiGate 501E, FortiGate 600E, FortiGate 600F, FortiGate 601E, FortiGate 601F, FortiGate 60F, FortiGate 61F, FortiGate 70F, FortiGate 71F, FortiGate 800D, FortiGate 80F Bypass, FortiGate 80F DSL, FortiGate 80F-POE, FortiGate 80F, FortiGate 81F, FortiGate 900D, FortiGate 900G, FortiGate 901G, FortiGate 90G, FortiGate 91G, FortiGate VM ARM64 for Azure, FortiGate VM ARM64 for GCP BYOL, FortiGate VM ARM64 for OCI BYOL, FortiGate VM for Aliyun PAYG, FortiGate VM for AWS PAYG, FortiGate VM for Azure BYOL, FortiGate VM for Azure PAYG, FortiGate VM for GCP BYOL, FortiGate VM for OPC BYOL, FortiGate VM64, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiGateRugged 70F 3G4G, FortiGateRugged 70F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60F, FortiWiFi 61F, FortiWiFi 80F 2R 3G4G DSL, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G DSL, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. It is not available for: FortiGate 5001E1, FortiGate 5001E. |
Configure FortiSwitch flow tracking and export via ipfix/netflow.
config switch-controller flow-tracking
Description: Configure FortiSwitch flow tracking and export via ipfix/netflow.
config aggregates
Description: Configure aggregates in which all traffic sessions matching the IP Address will be grouped into the same flow.
edit <id>
set ip {ipv4-classnet}
next
end
config collectors
Description: Configure collectors for the flow.
edit <name>
set ip {ipv4-address-any}
set port {integer}
set transport [udp|tcp|...]
next
end
set format [netflow1|netflow5|...]
set level [vlan|ip|...]
set max-export-pkt-size {integer}
set sample-mode [local|perimeter|...]
set sample-rate {integer}
set template-export-period {integer}
set timeout-general {integer}
set timeout-icmp {integer}
set timeout-max {integer}
set timeout-tcp {integer}
set timeout-tcp-fin {integer}
set timeout-tcp-rst {integer}
set timeout-udp {integer}
end
config switch-controller flow-tracking
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
format |
Configure flow tracking protocol. |
option |
- |
netflow9 |
||||||||||||
|
|
|
|||||||||||||||
|
level |
Configure flow tracking level. |
option |
- |
ip |
||||||||||||
|
|
|
|||||||||||||||
|
max-export-pkt-size |
Configure flow max export packet size. |
integer |
Minimum value: 512 Maximum value: 9216 |
512 |
||||||||||||
|
sample-mode |
Configure sample mode for the flow tracking. |
option |
- |
perimeter |
||||||||||||
|
|
|
|||||||||||||||
|
sample-rate |
Configure sample rate for the perimeter and device-ingress sampling. |
integer |
Minimum value: 0 Maximum value: 99999 |
512 |
||||||||||||
|
template-export-period |
Configure template export period. |
integer |
Minimum value: 1 Maximum value: 60 |
5 |
||||||||||||
|
timeout-general |
Configure flow session general timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
3600 |
||||||||||||
|
timeout-icmp |
Configure flow session ICMP timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
300 |
||||||||||||
|
timeout-max |
Configure flow session max timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
604800 |
||||||||||||
|
timeout-tcp |
Configure flow session TCP timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
3600 |
||||||||||||
|
timeout-tcp-fin |
Configure flow session TCP FIN timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
300 |
||||||||||||
|
timeout-tcp-rst |
Configure flow session TCP RST timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
120 |
||||||||||||
|
timeout-udp |
Configure flow session UDP timeout. |
integer |
Minimum value: 60 Maximum value: 604800 |
300 |
||||||||||||
config aggregates
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
id |
Aggregate id. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
|
ip |
IP address to group all matching traffic sessions to a flow. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
config collectors
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ip |
Collector IP address. |
ipv4-address-any |
Not Specified |
0.0.0.0 |
||||||||
|
name |
Collector name. |
string |
Maximum length: 63 |
|
||||||||
|
port |
Collector port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||
|
transport |
Collector L4 transport protocol for exporting packets. |
option |
- |
udp |
||||||||
|
|
|
|||||||||||