config router ospf6

Configure IPv6 OSPF.

config router ospf6

Description: Configure IPv6 OSPF.

set abr-type [cisco|ibm|...]

set auto-cost-ref-bandwidth {integer}

set default-information-originate [enable|always|...]

set log-neighbour-changes [enable|disable]

set default-information-metric {integer}

set default-information-metric-type [1|2]

set default-information-route-map {string}

set default-metric {integer}

set router-id {ipv4-address-any}

set spf-timers {user}

set bfd [enable|disable]

config area

Description: OSPF6 area configuration.

edit <id>

set default-cost {integer}

set nssa-translator-role [candidate|never|...]

set stub-type [no-summary|summary]

set type [regular|nssa|...]

set nssa-default-information-originate [enable|disable]

set nssa-default-information-originate-metric {integer}

set nssa-default-information-originate-metric-type [1|2]

set nssa-redistribution [enable|disable]

set authentication [none|ah|...]

set key-rollover-interval {integer}

set ipsec-auth-alg [md5|sha1|...]

set ipsec-enc-alg [null|des|...]

config ipsec-keys

Description: IPsec authentication and encryption keys.

edit <spi>

set auth-key {password}

set enc-key {password}

next

end

config range

Description: OSPF6 area range configuration.

edit <id>

set prefix6 {ipv6-network}

set advertise [disable|enable]

next

end

config virtual-link

Description: OSPF6 virtual link configuration.

edit <name>

set dead-interval {integer}

set hello-interval {integer}

set retransmit-interval {integer}

set transmit-delay {integer}

set peer {ipv4-address-any}

set authentication [none|ah|...]

set key-rollover-interval {integer}

set ipsec-auth-alg [md5|sha1|...]

set ipsec-enc-alg [null|des|...]

config ipsec-keys

Description: IPsec authentication and encryption keys.

edit <spi>

set auth-key {password}

set enc-key {password}

next

end

next

end

next

end

config ospf6-interface

Description: OSPF6 interface configuration.

edit <name>

set area-id {ipv4-address-any}

set interface {string}

set retransmit-interval {integer}

set transmit-delay {integer}

set cost {integer}

set priority {integer}

set dead-interval {integer}

set hello-interval {integer}

set status [disable|enable]

set network-type [broadcast|point-to-point|...]

set bfd [global|enable|...]

set mtu {integer}

set mtu-ignore [enable|disable]

set authentication [none|ah|...]

set key-rollover-interval {integer}

set ipsec-auth-alg [md5|sha1|...]

set ipsec-enc-alg [null|des|...]

config ipsec-keys

Description: IPsec authentication and encryption keys.

edit <spi>

set auth-key {password}

set enc-key {password}

next

end

config neighbor

Description: OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media

edit <ip6>

set poll-interval {integer}

set cost {integer}

set priority {integer}

next

end

next

end

config redistribute

Description: Redistribute configuration.

edit <name>

set status [enable|disable]

set metric {integer}

set routemap {string}

set metric-type [1|2]

next

end

set passive-interface <name1>, <name2>, ...

config summary-address

Description: IPv6 address summary configuration.

edit <id>

set prefix6 {ipv6-network}

set advertise [disable|enable]

set tag {integer}

next

end

end

config router ospf6

Parameter	Description	Type	Size	Default
abr-type	Area border router type.	option	-	standard
	Option Description cisco Cisco. ibm IBM. standard Standard.
auto-cost-ref-bandwidth	Reference bandwidth in terms of megabits per second.	integer	Minimum value: 1 Maximum value: 1000000	1000
default-information-originate	Enable/disable generation of default route.	option	-	disable
	Option Description enable Enable setting. always Always advertise the default router. disable Disable setting.
log-neighbour-changes	Enable logging of OSPFv3 neighbour's changes	option	-	enable
	Option Description enable Enable setting. disable Disable setting.
default-information-metric	Default information metric.	integer	Minimum value: 1 Maximum value: 16777214	10
default-information-metric-type	Default information metric type.	option	-	2
	Option Description 1 Type 1. 2 Type 2.
default-information-route-map	Default information route map.	string	Maximum length: 35
default-metric	Default metric of redistribute routes.	integer	Minimum value: 1 Maximum value: 16777214	10
router-id	A.B.C.D, in IPv4 address format.	ipv4-address-any	Not Specified	0.0.0.0
spf-timers	SPF calculation frequency.	user	Not Specified
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-	disable
	Option Description enable Enable Bidirectional Forwarding Detection (BFD). disable Disable Bidirectional Forwarding Detection (BFD).
passive-interface <name>	Passive interface configuration. Passive interface name.	string	Maximum length: 79

config area

Parameter	Description	Type	Size	Default
default-cost	Summary default cost of stub or NSSA area.	integer	Minimum value: 0 Maximum value: 16777215	10
nssa-translator-role	NSSA translator role type.	option	-	candidate
	Option Description candidate Candidate. never Never. always Always.
stub-type	Stub summary setting.	option	-	summary
	Option Description no-summary No summary. summary Summary.
type	Area type setting.	option	-	regular
	Option Description regular Regular. nssa NSSA. stub Stub.
nssa-default-information-originate	Enable/disable originate type 7 default into NSSA area.	option	-	disable
	Option Description enable Enable originate type 7 default into NSSA area. disable Disable originate type 7 default into NSSA area.
nssa-default-information-originate-metric	OSPFv3 default metric.	integer	Minimum value: 0 Maximum value: 16777214	10
nssa-default-information-originate-metric-type	OSPFv3 metric type for default routes.	option	-	2
	Option Description 1 Type 1. 2 Type 2.
nssa-redistribution	Enable/disable redistribute into NSSA area.	option	-	enable
	Option Description enable Enable redistribute into NSSA area. disable Disable redistribute into NSSA area.
authentication	Authentication mode.	option	-	none
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000	300
ipsec-auth-alg	Authentication algorithm.	option	-	md5
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-	null
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config range

Parameter	Description	Type	Size	Default
prefix6	IPv6 prefix.	ipv6-network	Not Specified	::/0
advertise	Enable/disable advertise status.	option	-	enable
	Option Description disable disable enable enable

config virtual-link

Parameter	Description	Type	Size	Default
dead-interval	Dead interval.	integer	Minimum value: 1 Maximum value: 65535	40
hello-interval	Hello interval.	integer	Minimum value: 1 Maximum value: 65535	10
retransmit-interval	Retransmit interval.	integer	Minimum value: 1 Maximum value: 65535	5
transmit-delay	Transmit delay.	integer	Minimum value: 1 Maximum value: 65535	1
peer	A.B.C.D, peer router ID.	ipv4-address-any	Not Specified	0.0.0.0
authentication	Authentication mode.	option	-	area
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload. area Use the routing area's authentication configuration.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000	300
ipsec-auth-alg	Authentication algorithm.	option	-	md5
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-	null
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ospf6-interface

Parameter	Description	Type	Size	Default
area-id	A.B.C.D, in IPv4 address format.	ipv4-address-any	Not Specified	0.0.0.0
interface	Configuration interface name.	string	Maximum length: 15
retransmit-interval	Retransmit interval.	integer	Minimum value: 1 Maximum value: 65535	5
transmit-delay	Transmit delay.	integer	Minimum value: 1 Maximum value: 65535	1
cost	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.	integer	Minimum value: 0 Maximum value: 65535	0
priority	priority	integer	Minimum value: 0 Maximum value: 255	1
dead-interval	Dead interval.	integer	Minimum value: 1 Maximum value: 65535	0
hello-interval	Hello interval.	integer	Minimum value: 1 Maximum value: 65535	0
status	Enable/disable OSPF6 routing on this interface.	option	-	enable
	Option Description disable Disable OSPF6 routing. enable Enable OSPF6 routing.
network-type	Network type.	option	-	broadcast
	Option Description broadcast broadcast point-to-point point-to-point non-broadcast non-broadcast point-to-multipoint point-to-multipoint point-to-multipoint-non-broadcast point-to-multipoint and non-broadcast.
bfd	Enable/disable Bidirectional Forwarding Detection (BFD).	option	-	global
	Option Description global Use global configuration of Bidirectional Forwarding Detection (BFD). enable Enable Bidirectional Forwarding Detection (BFD) on this interface. disable Disable Bidirectional Forwarding Detection (BFD) on this interface.
mtu	MTU for OSPFv3 packets.	integer	Minimum value: 576 Maximum value: 65535	0
mtu-ignore	Enable/disable ignoring MTU field in DBD packets.	option	-	disable
	Option Description enable Ignore MTU field in DBD packets. disable Do not ignore MTU field in DBD packets.
authentication	Authentication mode.	option	-	area
	Option Description none Disable authentication. ah Authentication Header. esp Encapsulating Security Payload. area Use the routing area's authentication configuration.
key-rollover-interval	Key roll-over interval.	integer	Minimum value: 300 Maximum value: 216000	300
ipsec-auth-alg	Authentication algorithm.	option	-	md5
	Option Description md5 MD5. sha1 SHA1. sha256 SHA256. sha384 SHA384. sha512 SHA512.
ipsec-enc-alg	Encryption algorithm.	option	-	null
	Option Description null No encryption. des DES. 3des 3DES. aes128 AES128. aes192 AES192. aes256 AES256.

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config ipsec-keys

Parameter	Description	Type	Size	Default
auth-key	Authentication key.	password	Not Specified
enc-key	Encryption key.	password	Not Specified

config neighbor

Parameter	Description	Type	Size	Default
poll-interval	Poll interval time in seconds.	integer	Minimum value: 1 Maximum value: 65535	10
cost	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.	integer	Minimum value: 0 Maximum value: 65535	0
priority	priority	integer	Minimum value: 0 Maximum value: 255	1

config redistribute

Parameter	Description	Type	Size	Default
status	status	option	-	disable
	Option Description enable Enable setting. disable Disable setting.
metric	Redistribute metric setting.	integer	Minimum value: 0 Maximum value: 16777214	0
routemap	Route map name.	string	Maximum length: 35
metric-type	Metric type.	option	-	2
	Option Description 1 Type 1. 2 Type 2.

config summary-address

Parameter	Description	Type	Size	Default
prefix6	IPv6 prefix.	ipv6-network	Not Specified	::/0
advertise	Enable/disable advertise status.	option	-	enable
	Option Description disable disable enable enable
tag	Tag value.	integer	Minimum value: 0 Maximum value: 4294967295	0