config switch-controller fortilink-settings

Configure integrated FortiLink settings for FortiSwitch.

config switch-controller fortilink-settings

Description: Configure integrated FortiLink settings for FortiSwitch.

edit <name>

set fortilink {string}

set inactive-timer {integer}

set link-down-flush [disable|enable]

config nac-ports

Description: NAC specific configuration.

set onboarding-vlan {string}

set bounce-nac-port [disable|enable]

set lan-segment [enabled|disabled]

set nac-lan-interface {string}

set nac-segment-vlans <vlan-name1>, <vlan-name2>, ...

set parent-key {string}

set member-change {integer}

end

next

end

config switch-controller fortilink-settings

Parameter	Description	Type	Size	Default
fortilink	FortiLink interface to which this fortilink-setting belongs.	string	Maximum length: 15
inactive-timer	Time interval(minutes) to be included in the inactive devices expiry calculation (mac age-out + inactive-time + periodic scan interval).	integer	Minimum value: 1 Maximum value: 1440	15
link-down-flush	Clear NAC and dynamic devices on switch ports on link down event.	option	-	enable
	Option Description disable Disable clearing NAC and dynamic devices on a switch port when link down event happens. enable Enable clearing NAC and dynamic devices on a switch port when link down event happens.

config nac-ports

Parameter	Description	Type	Size	Default
onboarding-vlan	Default NAC Onboarding VLAN when NAC devices are discovered.	string	Maximum length: 15
bounce-nac-port	Enable/disable bouncing (administratively bring the link down, up) of a switch port when NAC mode is configured on the port. Helps to re-initiate the DHCP process for a device.	option	-	enable
	Option Description disable Disable bouncing (administratively bring the link down, up) of a switch port when NAC mode is configured. enable Enable bouncing (administratively bring the link down, up) of a switch port when NAC mode is configured.
lan-segment	Enable/disable LAN segment feature on the FortiLink interface.	option	-	disabled
	Option Description enabled Enable lan-segment on this interface. disabled Disable lan-segment on this interface.
nac-lan-interface	Configure NAC LAN interface.	string	Maximum length: 15
nac-segment-vlans <vlan-name>	Configure NAC segment VLANs. VLAN interface name.	string	Maximum length: 79
parent-key	Parent key name.	string	Maximum length: 35
member-change	Member change flag.	integer	Minimum value: 0 Maximum value: 255	0