config switch-controller stp-settings
Configure FortiSwitch spanning tree protocol (STP).
config switch-controller stp-settings
Description: Configure FortiSwitch spanning tree protocol (STP).
set name {string}
set revision {integer}
set hello-time {integer}
set forward-time {integer}
set max-age {integer}
set max-hops {integer}
set pending-timer {integer}
end
config switch-controller stp-settings
|
Parameter name |
Description |
Type |
Size |
|---|---|---|---|
|
name |
Name of global STP settings configuration. |
string |
Maximum length: 31 |
|
revision |
STP revision number (0 - 65535). |
integer |
Minimum value: 0 Maximum value: 65535 |
|
hello-time |
Period of time between successive STP frame Bridge Protocol Data Units (BPDUs) sent on a port (1 - 10 sec, default = 2). |
integer |
Minimum value: 1 Maximum value: 10 |
|
forward-time |
Period of time a port is in listening and learning state (4 - 30 sec, default = 15). |
integer |
Minimum value: 4 Maximum value: 30 |
|
max-age |
Maximum time before a bridge port saves its configuration BPDU information (6 - 40 sec, default = 20). |
integer |
Minimum value: 6 Maximum value: 40 |
|
max-hops |
Maximum number of hops between the root bridge and the furthest bridge (1- 40, default = 20). |
integer |
Minimum value: 1 Maximum value: 40 |
|
pending-timer |
Pending time (1 - 15 sec, default = 4). |
integer |
Minimum value: 1 Maximum value: 15 |