config wanopt cache-service

Designate cache-service for wan-optimization and webcache.

config wanopt cache-service

Description: Designate cache-service for wan-optimization and webcache.

set prefer-scenario [balance|prefer-speed|...]

set collaboration [enable|disable]

set device-id {string}

set acceptable-connections [any|peers]

config dst-peer

Description: Modify cache-service destination peer list.

edit <device-id>

set auth-type {integer}

set encode-type {integer}

set priority {integer}

set ip {ipv4-address-any}

next

end

config src-peer

Description: Modify cache-service source peer list.

edit <device-id>

set auth-type {integer}

set encode-type {integer}

set priority {integer}

set ip {ipv4-address-any}

next

end

end

config wanopt cache-service

Parameter name	Description	Type	Size
prefer-scenario	Set the preferred cache behavior towards the balance between latency and hit-ratio.	option	-
	Option Description balance Balance between speed and cache hit ratio. prefer-speed Prefer response speed at the expense of increased cache bypasses. prefer-cache Prefer improving hit-ratio through increasing latency tolerance.
collaboration	Enable/disable cache-collaboration between cache-service clusters.	option	-
	Option Description enable Enable cache cache-collaboration. disable Disable cache cache-collaboration.
device-id	Set identifier for this cache device.	string	Maximum length: 35
acceptable-connections	Set strategy when accepting cache collaboration connection.	option	-
	Option Description any We can accept any cache-collaboration connection. peers We can only accept connections that are already in src-peers.

Parameter name	Description	Type	Size
auth-type	Set authentication type for this peer.	integer	Minimum value: 0 Maximum value: 255
encode-type	Set encode type for this peer.	integer	Minimum value: 0 Maximum value: 255
priority	Set priority for this peer.	integer	Minimum value: 0 Maximum value: 255
ip	Set cluster IP address of this peer.	ipv4-address-any	Not Specified

Parameter name	Description	Type	Size
auth-type	Set authentication type for this peer.	integer	Minimum value: 0 Maximum value: 255
encode-type	Set encode type for this peer.	integer	Minimum value: 0 Maximum value: 255
priority	Set priority for this peer.	integer	Minimum value: 0 Maximum value: 255
ip	Set cluster IP address of this peer.	ipv4-address-any	Not Specified