config switch-controller mac-policy
Description: Configure MAC policy to be applied on the managed FortiSwitch devices through NAC device.
edit <name>
set description {string}
set fortilink {string}
set vlan {string}
set traffic-policy {string}
set count [disable|enable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| description | Description for the MAC policy. | string | Maximum length: 63 |
| fortilink | FortiLink interface for which this MAC policy belongs to. | string | Maximum length: 15 |
| vlan | Ingress traffic VLAN assignment for the MAC address matching this MAC policy. | string | Maximum length: 15 |
| traffic-policy | Traffic policy to be applied when using this MAC policy. | string | Maximum length: 63 |
| count | Enable/Disable packet count on the NAC device. disable: Enable packet count on the NAC device. enable: Disable packet count on the NAC device. |
option | - |
config switch-controller mac-policy
Description: Configure MAC policy to be applied on the managed FortiSwitch devices through NAC device.
edit <name>
set description {string}
set fortilink {string}
set vlan {string}
set traffic-policy {string}
set count [disable|enable]
next
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| description | Description for the MAC policy. | string | Maximum length: 63 |
| fortilink | FortiLink interface for which this MAC policy belongs to. | string | Maximum length: 15 |
| vlan | Ingress traffic VLAN assignment for the MAC address matching this MAC policy. | string | Maximum length: 15 |
| traffic-policy | Traffic policy to be applied when using this MAC policy. | string | Maximum length: 63 |
| count | Enable/Disable packet count on the NAC device. disable: Enable packet count on the NAC device. enable: Disable packet count on the NAC device. |
option | - |