config vpn l2tp
Description: Configure L2TP.
set eip {ipv4-address}
set sip {ipv4-address}
set status [enable|disable]
set usrgrp {string}
set enforce-ipsec [enable|disable]
set lcp-echo-interval {integer}
set lcp-max-echo-fails {integer}
set compress [enable|disable]
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| eip | End IP. | ipv4-address | Not Specified |
| sip | Start IP. | ipv4-address | Not Specified |
| status | Enable/disable FortiGate as a L2TP gateway. enable: Enable setting. disable: Disable setting. |
option | - |
| usrgrp | User group. | string | Maximum length: 35 |
| enforce-ipsec | Enable/disable IPsec enforcement. enable: Enable enforce-ipsec disable: Disable enforce-ipsec |
option | - |
| lcp-echo-interval | Time in seconds between PPPoE Link Control Protocol (LCP) echo requests. | integer | Minimum value: 0 Maximum value: 32767 |
| lcp-max-echo-fails | Maximum number of missed LCP echo messages before disconnect. | integer | Minimum value: 0 Maximum value: 32767 |
| compress | Enable/disable data compression. enable: Enable compress disable: Disable compress |
option | - |
config vpn l2tp
Description: Configure L2TP.
set eip {ipv4-address}
set sip {ipv4-address}
set status [enable|disable]
set usrgrp {string}
set enforce-ipsec [enable|disable]
set lcp-echo-interval {integer}
set lcp-max-echo-fails {integer}
set compress [enable|disable]
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| eip | End IP. | ipv4-address | Not Specified |
| sip | Start IP. | ipv4-address | Not Specified |
| status | Enable/disable FortiGate as a L2TP gateway. enable: Enable setting. disable: Disable setting. |
option | - |
| usrgrp | User group. | string | Maximum length: 35 |
| enforce-ipsec | Enable/disable IPsec enforcement. enable: Enable enforce-ipsec disable: Disable enforce-ipsec |
option | - |
| lcp-echo-interval | Time in seconds between PPPoE Link Control Protocol (LCP) echo requests. | integer | Minimum value: 0 Maximum value: 32767 |
| lcp-max-echo-fails | Maximum number of missed LCP echo messages before disconnect. | integer | Minimum value: 0 Maximum value: 32767 |
| compress | Enable/disable data compression. enable: Enable compress disable: Disable compress |
option | - |