config router multicast
Configure router multicast.
config router multicast
Description: Configure router multicast.
set route-threshold {integer}
set route-limit {integer}
set multicast-routing [enable|disable]
config pim-sm-global
Description: PIM sparse-mode global settings.
set message-interval {integer}
set join-prune-holdtime {integer}
set accept-register-list {string}
set accept-source-list {string}
set bsr-candidate [enable|disable]
set bsr-interface {string}
set bsr-priority {integer}
set bsr-hash {integer}
set bsr-allow-quick-refresh [enable|disable]
set cisco-register-checksum [enable|disable]
set cisco-register-checksum-group {string}
set cisco-crp-prefix [enable|disable]
set cisco-ignore-rp-set-priority [enable|disable]
set register-rp-reachability [enable|disable]
set register-source [disable|interface|...]
set register-source-interface {string}
set register-source-ip {ipv4-address}
set register-supression {integer}
set null-register-retries {integer}
set rp-register-keepalive {integer}
set spt-threshold [enable|disable]
set spt-threshold-group {string}
set ssm [enable|disable]
set ssm-range {string}
set register-rate-limit {integer}
config rp-address
Description: Statically configure RP addresses.
edit <id>
set ip-address {ipv4-address}
set group {string}
next
end
end
config interface
Description: PIM interfaces.
edit <name>
set ttl-threshold {integer}
set pim-mode [sparse-mode|dense-mode]
set passive [enable|disable]
set bfd [enable|disable]
set neighbour-filter {string}
set hello-interval {integer}
set hello-holdtime {integer}
set cisco-exclude-genid [enable|disable]
set dr-priority {integer}
set propagation-delay {integer}
set state-refresh-interval {integer}
set rp-candidate [enable|disable]
set rp-candidate-group {string}
set rp-candidate-priority {integer}
set rp-candidate-interval {integer}
set multicast-flow {string}
set static-group {string}
set rpf-nbr-fail-back [enable|disable]
set rpf-nbr-fail-back-filter {string}
config join-group
Description: Join multicast groups.
edit <address>
next
end
config igmp
Description: IGMP configuration options.
set access-group {string}
set version [3|2|...]
set immediate-leave-group {string}
set last-member-query-interval {integer}
set last-member-query-count {integer}
set query-max-response-time {integer}
set query-interval {integer}
set query-timeout {integer}
set router-alert-check [enable|disable]
end
next
end
end
config router multicast
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
route-threshold |
Generate warnings when the number of multicast routes exceeds this number, must not be greater than route-limit. |
integer |
Minimum value: 1 Maximum value: 2147483647 |
|
||||||
|
route-limit |
Maximum number of multicast routes. |
integer |
Minimum value: 1 Maximum value: 2147483647 |
2147483647 |
||||||
|
multicast-routing |
Enable/disable IP multicast routing. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config pim-sm-global
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
message-interval |
Period of time between sending periodic PIM join/prune messages in seconds . |
integer |
Minimum value: 1 Maximum value: 65535 |
60 |
||||||||
|
join-prune-holdtime |
Join/prune holdtime . |
integer |
Minimum value: 1 Maximum value: 65535 |
210 |
||||||||
|
accept-register-list |
Sources allowed to register packets with this Rendezvous Point (RP). |
string |
Not Specified |
|
||||||||
|
accept-source-list |
Sources allowed to send multicast traffic. |
string |
Not Specified |
|
||||||||
|
bsr-candidate |
Enable/disable allowing this router to become a bootstrap router (BSR). |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
bsr-interface |
Interface to advertise as candidate BSR. |
string |
Not Specified |
|
||||||||
|
bsr-priority |
BSR priority . |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||||
|
bsr-hash |
BSR hash length . |
integer |
Minimum value: 0 Maximum value: 32 |
10 |
||||||||
|
bsr-allow-quick-refresh |
Enable/disable accept BSR quick refresh packets from neighbors. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
cisco-register-checksum |
Checksum entire register packet(for old Cisco IOS compatibility). |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
cisco-register-checksum-group |
Cisco register checksum only these groups. |
string |
Not Specified |
|
||||||||
|
cisco-crp-prefix |
Enable/disable making candidate RP compatible with old Cisco IOS. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
cisco-ignore-rp-set-priority |
Use only hash for RP selection (compatibility with old Cisco IOS). |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
register-rp-reachability |
Enable/disable check RP is reachable before registering packets. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
register-source |
Override source address in register packets. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
register-source-interface |
Override with primary interface address. |
string |
Not Specified |
|
||||||||
|
register-source-ip |
Override with local IP address. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||||
|
register-supression |
Period of time to honor register-stop message . |
integer |
Minimum value: 1 Maximum value: 65535 |
60 |
||||||||
|
null-register-retries |
Maximum retries of null register . |
integer |
Minimum value: 1 Maximum value: 20 |
1 |
||||||||
|
rp-register-keepalive |
Timeout for RP receiving data on . |
integer |
Minimum value: 1 Maximum value: 65535 |
185 |
||||||||
|
spt-threshold |
Enable/disable switching to source specific trees. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
spt-threshold-group |
Groups allowed to switch to source tree. |
string |
Not Specified |
|
||||||||
|
ssm |
Enable/disable source specific multicast. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
ssm-range |
Groups allowed to source specific multicast. |
string |
Not Specified |
|
||||||||
|
register-rate-limit |
Limit of packets/sec per source registered through this RP . |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||
config rp-address
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
ip-address |
RP router address. |
ipv4-address |
Not Specified |
0.0.0.0 |
|
group |
Groups to use this RP. |
string |
Not Specified |
|
config interface
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ttl-threshold |
Minimum TTL of multicast packets that will be forwarded . |
integer |
Minimum value: 1 Maximum value: 255 |
1 |
||||||
|
pim-mode |
PIM operation mode. |
option |
- |
sparse-mode |
||||||
|
|
|
|||||||||
|
passive |
Enable/disable listening to IGMP but not participating in PIM. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
bfd |
Enable/disable Protocol Independent Multicast (PIM) Bidirectional Forwarding Detection (BFD). |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
neighbour-filter |
Routers acknowledged as neighbor routers. |
string |
Not Specified |
|
||||||
|
hello-interval |
Interval between sending PIM hello messages . |
integer |
Minimum value: 1 Maximum value: 65535 |
30 |
||||||
|
hello-holdtime |
Time before old neighbor information expires . |
integer |
Minimum value: 1 Maximum value: 65535 |
|
||||||
|
cisco-exclude-genid |
Exclude GenID from hello packets (compatibility with old Cisco IOS). |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
dr-priority |
DR election priority. |
integer |
Minimum value: 1 Maximum value: 4294967295 |
1 |
||||||
|
propagation-delay |
Delay flooding packets on this interface . |
integer |
Minimum value: 100 Maximum value: 5000 |
500 |
||||||
|
state-refresh-interval |
Interval between sending state-refresh packets . |
integer |
Minimum value: 1 Maximum value: 100 |
60 |
||||||
|
rp-candidate |
Enable/disable compete to become RP in elections. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
rp-candidate-group |
Multicast groups managed by this RP. |
string |
Not Specified |
|
||||||
|
rp-candidate-priority |
Router's priority as RP. |
integer |
Minimum value: 0 Maximum value: 255 |
192 |
||||||
|
rp-candidate-interval |
RP candidate advertisement interval . |
integer |
Minimum value: 1 Maximum value: 16383 |
60 |
||||||
|
multicast-flow |
Acceptable source for multicast group. |
string |
Not Specified |
|
||||||
|
static-group |
Statically set multicast groups to forward out. |
string |
Not Specified |
|
||||||
|
rpf-nbr-fail-back |
Enable/disable fail back for RPF neighbor query. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
rpf-nbr-fail-back-filter |
Filter for fail back RPF neighbors. |
string |
Not Specified |
|
||||||
config igmp
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
access-group |
Groups IGMP hosts are allowed to join. |
string |
Not Specified |
|
||||||||
|
version |
Maximum version of IGMP to support. |
option |
- |
3 |
||||||||
|
|
|
|||||||||||
|
immediate-leave-group |
Groups to drop membership for immediately after receiving IGMPv2 leave. |
string |
Not Specified |
|
||||||||
|
last-member-query-interval |
Timeout between IGMPv2 leave and removing group . |
integer |
Minimum value: 1 Maximum value: 65535 |
1000 |
||||||||
|
last-member-query-count |
Number of group specific queries before removing group . |
integer |
Minimum value: 2 Maximum value: 7 |
2 |
||||||||
|
query-max-response-time |
Maximum time to wait for a IGMP query response . |
integer |
Minimum value: 1 Maximum value: 25 |
10 |
||||||||
|
query-interval |
Interval between queries to IGMP hosts . |
integer |
Minimum value: 1 Maximum value: 65535 |
125 |
||||||||
|
query-timeout |
Timeout between queries before becoming querier for network . |
integer |
Minimum value: 60 Maximum value: 900 |
255 |
||||||||
|
router-alert-check |
Enable/disable require IGMP packets contain router alert option. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||