status

Enable or disable this policy.

option

-

name

Policy name.

string

Not Specified

uuid

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

uuid

Not Specified

srcintf <name>

Incoming (ingress) interface.

Interface name.

string

Maximum length: 79

dstintf <name>

Outgoing (egress) interface.

Interface name.

string

Maximum length: 79

srcaddr <name>

Source IPv4 address and address group names.

Address name.

string

Maximum length: 79

dstaddr <name>

Destination IPv4 address and address group names.

Address name.

string

Maximum length: 79

srcaddr6 <name>

Source IPv6 address name and address group names.

Address name.

string

Maximum length: 79

dstaddr6 <name>

Destination IPv6 address name and address group names.

Address name.

string

Maximum length: 79

internet-service

Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.

option

-

internet-service-name <name>

Internet Service name.

Internet Service name.

string

Maximum length: 79

internet-service-group <name>

Internet Service group name.

Internet Service group name.

string

Maximum length: 79

internet-service-custom <name>

Custom Internet Service name.

Custom Internet Service name.

string

Maximum length: 79

internet-service-custom-group <name>

Custom Internet Service group name.

Custom Internet Service group name.

string

Maximum length: 79

internet-service-src

Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.

option

-

internet-service-src-name <name>

Internet Service source name.

Internet Service name.

string

Maximum length: 79

internet-service-src-group <name>

Internet Service source group name.

Internet Service group name.

string

Maximum length: 79

internet-service-src-custom <name>

Custom Internet Service source name.

Custom Internet Service name.

string

Maximum length: 79

internet-service-src-custom-group <name>

Custom Internet Service source group name.

Custom Internet Service group name.

string

Maximum length: 79

reputation-minimum

Minimum Reputation to take action.

integer

Minimum value: 0 Maximum value: 4294967295

reputation-direction

Direction of the initial traffic for reputation to take effect.

option

-

src-vendor-mac <id>

Vendor MAC source ID.

Vendor MAC ID.

integer

Minimum value: 0 Maximum value: 4294967295

rtp-nat

Enable Real Time Protocol (RTP) NAT.

option

-

rtp-addr <name>

Address names if this is an RTP NAT policy.

Address name.

string

Maximum length: 79

action

Policy action (accept/deny/ipsec).

option

-

send-deny-packet

Enable to send a reply when a session is denied or blocked by a firewall policy.

option

-

firewall-session-dirty

How to handle sessions if the configuration of this firewall policy changes.

option

-

schedule

Schedule name.

string

Not Specified

schedule-timeout

Enable to force current sessions to end when the schedule object times out. Disable allows them to end from inactivity.

option

-

service <name>

Service and service group names.

Service and service group names.

string

Maximum length: 79

tos

ToS (Type of Service) value used for comparison.

user

Not Specified

tos-mask

Non-zero bit positions are used for comparison while zero bit positions are ignored.

user

Not Specified

tos-negate

Enable negated TOS match.

option

-

anti-replay

Enable/disable anti-replay check.

option

-

tcp-session-without-syn

Enable/disable creation of TCP session without SYN flag.

option

-

geoip-anycast

Enable/disable recognition of anycast IP addresses using the geography IP database.

option

-

geoip-match

Match geography address based either on its physical location or registered location.

option

-

dynamic-shaping

Enable/disable dynamic RADIUS defined traffic shaping.

option

-

utm-status

Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.

option

-

inspection-mode

Policy inspection mode (Flow/proxy). Default is Flow mode.

option

-

http-policy-redirect

Redirect HTTP(S) traffic to matching transparent web proxy policy.

option

-

ssh-policy-redirect

Redirect SSH traffic to matching transparent proxy policy.

option

-

webproxy-profile

Webproxy profile name.

string

Not Specified

profile-type

Determine whether the firewall policy allows security profile groups or single profiles only.

option

-

profile-group

Name of profile group.

string

Not Specified

profile-protocol-options

Name of an existing Protocol options profile.

string

Not Specified

ssl-ssh-profile

Name of an existing SSL SSH profile.

string

Not Specified

av-profile

Name of an existing Antivirus profile.

string

Not Specified

webfilter-profile

Name of an existing Web filter profile.

string

Not Specified

dnsfilter-profile

Name of an existing DNS filter profile.

string

Not Specified

emailfilter-profile

Name of an existing email filter profile.

string

Not Specified

dlp-sensor

Name of an existing DLP sensor.

string

Not Specified

file-filter-profile

Name of an existing file-filter profile.

string

Not Specified

ips-sensor

Name of an existing IPS sensor.

string

Not Specified

application-list

Name of an existing Application list.

string

Not Specified

voip-profile

Name of an existing VoIP profile.

string

Not Specified

icap-profile

Name of an existing ICAP profile.

string

Not Specified

cifs-profile

Name of an existing CIFS profile.

string

Not Specified

waf-profile

Name of an existing Web application firewall profile.

string

Not Specified

ssh-filter-profile

Name of an existing SSH filter profile.

string

Not Specified

logtraffic

Enable or disable logging. Log all sessions or security profile sessions.

option

-

logtraffic-start

Record logs when a session starts.

option

-

auto-asic-offload

Enable/disable policy traffic ASIC offloading.

option

-

np-acceleration *

Enable/disable UTM Network Processor acceleration.

option

-

webproxy-forward-server

Webproxy forward server name.

string

Not Specified

traffic-shaper

Traffic shaper.

string

Not Specified

traffic-shaper-reverse

Reverse traffic shaper.

string

Not Specified

per-ip-shaper

Per-IP traffic shaper.

string

Not Specified

nat

Enable/disable source NAT.

option

-

permit-any-host

Accept UDP packets from any host.

option

-

permit-stun-host

Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host.

option

-

fixedport

Enable to prevent source NAT from changing a session's source port.

option

-

ippool

Enable to use IP Pools for source NAT.

option

-

poolname <name>

IP Pool names.

IP pool name.

string

Maximum length: 79

poolname6 <name>

IPv6 pool names.

IPv6 pool name.

string

Maximum length: 79

session-ttl

TTL in seconds for sessions accepted by this policy .

user

Not Specified

vlan-cos-fwd

VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest.

integer

Minimum value: 0 Maximum value: 7

vlan-cos-rev

VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest.

integer

Minimum value: 0 Maximum value: 7

inbound

Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN.

option

-

outbound

Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.

option

-

natinbound

Policy-based IPsec VPN: apply destination NAT to inbound traffic.

option

-

natoutbound

Policy-based IPsec VPN: apply source NAT to outbound traffic.

option

-

wccp

Enable/disable forwarding traffic matching this policy to a configured WCCP server.

option

-

ntlm

Enable/disable NTLM authentication.

option

-

ntlm-guest

Enable/disable NTLM guest user access.

option

-

ntlm-enabled-browsers <user-agent-string>

HTTP-User-Agent value of supported browsers.

User agent string.

string

Maximum length: 79

fsso-agent-for-ntlm

FSSO agent to use for NTLM authentication.

string

Not Specified

groups <name>

Names of user groups that can authenticate with this policy.

Group name.

string

Maximum length: 79

users <name>

Names of individual users that can authenticate with this policy.

Names of individual users that can authenticate with this policy.

string

Maximum length: 79

fsso-groups <name>

Names of FSSO groups.

Names of FSSO groups.

string

Maximum length: 511

auth-path

Enable/disable authentication-based routing.

option

-

disclaimer

Enable/disable user authentication disclaimer.

option

-

email-collect

Enable/disable email collection.

option

-

vpntunnel

Policy-based IPsec VPN: name of the IPsec VPN Phase 1.

string

Not Specified

natip

Policy-based IPsec VPN: source NAT IP address for outgoing traffic.

ipv4-classnet

Not Specified

match-vip

Enable to match packets that have had their destination addresses changed by a VIP.

option

-

match-vip-only

Enable/disable matching of only those packets that have had their destination addresses changed by a VIP.

option

-

diffserv-forward

Enable to change packet's DiffServ values to the specified diffservcode-forward value.

option

-

diffserv-reverse

Enable to change packet's reverse (reply) DiffServ values to the specified diffservcode-rev value.

option

-

diffservcode-forward

Change packet's DiffServ to this value.

user

Not Specified

diffservcode-rev

Change packet's reverse (reply) DiffServ to this value.

user

Not Specified

tcp-mss-sender

Sender TCP maximum segment size (MSS).

integer

Minimum value: 0 Maximum value: 65535

tcp-mss-receiver

Receiver TCP maximum segment size (MSS).

integer

Minimum value: 0 Maximum value: 65535

comments

Comment.

var-string

Not Specified

auth-cert

HTTPS server certificate for policy authentication.

string

Not Specified

auth-redirect-addr

HTTP-to-HTTPS redirect address for firewall authentication.

string

Not Specified

redirect-url

URL users are directed to after seeing and accepting the disclaimer or authenticating.

string

Not Specified

identity-based-route

Name of identity-based routing rule.

string

Not Specified

block-notification

Enable/disable block notification.

option

-

custom-log-fields <field-id>

Custom fields to append to log messages for this policy.

Custom log field.

string

Maximum length: 35

replacemsg-override-group

Override the default replacement message group for this policy.

string

Not Specified

srcaddr-negate

When enabled srcaddr/srcaddr6 specifies what the source address must NOT be.

option

-

dstaddr-negate

When enabled dstaddr/dstaddr6 specifies what the destination address must NOT be.

option

-

service-negate

When enabled service specifies what the service must NOT be.

option

-

internet-service-negate

When enabled internet-service specifies what the service must NOT be.

option

-

internet-service-src-negate

When enabled internet-service-src specifies what the service must NOT be.

option

-

timeout-send-rst

Enable/disable sending RST packets when TCP sessions expire.

option

-

captive-portal-exempt

Enable to exempt some users from the captive portal.

option

-

decrypted-traffic-mirror

Decrypted traffic mirror.

string

Not Specified

dsri

Enable DSRI to ignore HTTP server responses.

option

-

radius-mac-auth-bypass

Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server.

option

-

delay-tcp-npu-session

Enable TCP NPU session delay to guarantee packet order of 3-way handshake.

option

-