config system snmp community

SNMP community configuration.

Description: SNMP community configuration.

edit <id>

set name {string}

set status [enable|disable]

config hosts

Description: Configure IPv4 SNMP managers (hosts).

edit <id>

set source-ip {ipv4-address}

set ip {user}

set ha-direct [enable|disable]

set host-type [any|query|...]

end

config hosts6

Description: Configure IPv6 SNMP managers.

edit <id>

set source-ipv6 {ipv6-address}

set ipv6 {ipv6-prefix}

set ha-direct [enable|disable]

set host-type [any|query|...]

end

set query-v1-status [enable|disable]

set query-v1-port {integer}

set query-v2c-status [enable|disable]

set query-v2c-port {integer}

set trap-v1-status [enable|disable]

set trap-v1-lport {integer}

set trap-v1-rport {integer}

set trap-v2c-status [enable|disable]

set trap-v2c-lport {integer}

set trap-v2c-rport {integer}

set events {option1}, {option2}, ...

end

config system snmp community

Parameter

Description

Type

Size

Default

name

Community name.

string

Not Specified

status

Enable/disable this SNMP community.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v1-port

SNMP v1 query port .

integer

Minimum value: 1 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v2c-port

SNMP v2c query port .

integer

Minimum value: 0 Maximum value: 65535

161

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

trap-v1-lport

SNMP v1 trap local port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v1-rport

SNMP v1 trap remote port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

trap-v2c-lport

SNMP v2c trap local port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port .

integer

Minimum value: 1 Maximum value: 65535

162

events

SNMP trap events.

option

cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open temperature-high voltage-alert power-supply-failure faz-disconnect wc-ap-up wc-ap-down fswctl-session-up fswctl-session-down load-balance-real-server-down per-cpu-high dhcp pool-usage **

Option	Description
cpu-high	Send a trap when CPU usage is high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
vpn-tun-up	Send a trap when a VPN tunnel comes up.
vpn-tun-down	Send a trap when a VPN tunnel goes down.
ha-switch	Send a trap after an HA failover when the backup unit has taken over.
ha-hb-failure	Send a trap when HA heartbeats are not received.
ips-signature	Send a trap when IPS detects an attack.
ips-anomaly	Send a trap when IPS finds an anomaly.
av-virus	Send a trap when AntiVirus finds a virus.
av-oversize	Send a trap when AntiVirus finds an oversized file.
av-pattern	Send a trap when AntiVirus finds file matching pattern.
av-fragmented	Send a trap when AntiVirus finds a fragmented file.
fm-if-change	Send a trap when FortiManager interface changes. Send a FortiManager trap.
fm-conf-change	Send a trap when a configuration change is made by a FortiGate administrator and the FortiGate is managed by FortiManager.
bgp-established	Send a trap when a BGP FSM transitions to the established state.
bgp-backward-transition	Send a trap when a BGP FSM goes from a high numbered state to a lower numbered state.
ha-member-up	Send a trap when an HA cluster member goes up.
ha-member-down	Send a trap when an HA cluster member goes down.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).
av-conserve	Send a trap when the FortiGate enters conserve mode.
av-bypass	Send a trap when the FortiGate enters bypass mode.
av-oversize-passed	Send a trap when AntiVirus passes an oversized file.
av-oversize-blocked	Send a trap when AntiVirus blocks an oversized file.
ips-pkg-update	Send a trap when the IPS signature database or engine is updated.
ips-fail-open	Send a trap when the IPS network buffer is full.
temperature-high	Send a trap when a temperature sensor registers a temperature that is too high.
voltage-alert	Send a trap when a voltage sensor registers a voltage that is outside of the normal range.
power-supply-failure	Send a trap when a power supply fails.
faz-disconnect	Send a trap when a FortiAnalyzer disconnects from the FortiGate.
wc-ap-up	Send a trap when a managed FortiAP comes up.
wc-ap-down	Send a trap when a managed FortiAP goes down.
fswctl-session-up	Send a trap when a FortiSwitch controller session comes up.
fswctl-session-down	Send a trap when a FortiSwitch controller session goes down.
load-balance-real-server-down	Send a trap when a server load balance real server goes down.
device-new	Send a trap when a new device is found.
per-cpu-high	Send a trap when per-CPU usage is high.
dhcp	Send a trap when the DHCP server exhausts the IP pool, an IP address already is in use, or a DHCP client interface received a DHCP-NAK.
pool-usage	Send a trap about ippool usage.

** Values may differ between models.

config hosts

Parameter

Description

Type

Size

Default

source-ip

Source IPv4 address for SNMP traps.

ipv4-address

Not Specified

0.0.0.0

IPv4 address of the SNMP manager (host).

user

Not Specified

ha-direct

Enable/disable direct management of HA cluster members.

option

disable

Option	Description
enable	Enable setting.
disable	Disable setting.

host-type

Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. No traps will be sent when IP type is subnet.

option

any

Option	Description
any	Accept queries from and send traps to this SNMP manager.
query	Accept queries from this SNMP manager but do not send traps.
trap	Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager.

config hosts6

Parameter

Description

Type

Size

Default

source-ipv6

Source IPv6 address for SNMP traps.

ipv6-address

Not Specified

ipv6

SNMP manager IPv6 address prefix.

ipv6-prefix

Not Specified

::/0

ha-direct

Enable/disable direct management of HA cluster members.

option

disable

Option	Description
enable	Enable setting.
disable	Disable setting.

host-type

Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both.

option

any

Option	Description
any	Accept queries from and send traps to this SNMP manager.
query	Accept queries from this SNMP manager but do not send traps.
trap	Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager.

config system snmp community

SNMP community configuration.

config system snmp community

Description: SNMP community configuration.

edit <id>

set name {string}

set status [enable|disable]

config hosts

Description: Configure IPv4 SNMP managers (hosts).

edit <id>

set source-ip {ipv4-address}

set ip {user}

set ha-direct [enable|disable]

set host-type [any|query|...]

end

config hosts6

Description: Configure IPv6 SNMP managers.

edit <id>

set source-ipv6 {ipv6-address}

set ipv6 {ipv6-prefix}

set ha-direct [enable|disable]

set host-type [any|query|...]

end

set query-v1-status [enable|disable]

set query-v1-port {integer}

set query-v2c-status [enable|disable]

set query-v2c-port {integer}

set trap-v1-status [enable|disable]

set trap-v1-lport {integer}

set trap-v1-rport {integer}

set trap-v2c-status [enable|disable]

set trap-v2c-lport {integer}

set trap-v2c-rport {integer}

set events {option1}, {option2}, ...

end

config system snmp community

Parameter

Description

Type

Size

Default

name

Community name.

string

Not Specified

status

Enable/disable this SNMP community.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v1-status

Enable/disable SNMP v1 queries.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v1-port

SNMP v1 query port .

integer

Minimum value: 1 Maximum value: 65535

161

query-v2c-status

Enable/disable SNMP v2c queries.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

query-v2c-port

SNMP v2c query port .

integer

Minimum value: 0 Maximum value: 65535

161

trap-v1-status

Enable/disable SNMP v1 traps.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

trap-v1-lport

SNMP v1 trap local port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v1-rport

SNMP v1 trap remote port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v2c-status

Enable/disable SNMP v2c traps.

option

enable

Option	Description
enable	Enable setting.
disable	Disable setting.

trap-v2c-lport

SNMP v2c trap local port .

integer

Minimum value: 1 Maximum value: 65535

162

trap-v2c-rport

SNMP v2c trap remote port .

integer

Minimum value: 1 Maximum value: 65535

162

events

SNMP trap events.

option

Option	Description
cpu-high	Send a trap when CPU usage is high.
mem-low	Send a trap when available memory is low.
log-full	Send a trap when log disk space becomes low.
intf-ip	Send a trap when an interface IP address is changed.
vpn-tun-up	Send a trap when a VPN tunnel comes up.
vpn-tun-down	Send a trap when a VPN tunnel goes down.
ha-switch	Send a trap after an HA failover when the backup unit has taken over.
ha-hb-failure	Send a trap when HA heartbeats are not received.
ips-signature	Send a trap when IPS detects an attack.
ips-anomaly	Send a trap when IPS finds an anomaly.
av-virus	Send a trap when AntiVirus finds a virus.
av-oversize	Send a trap when AntiVirus finds an oversized file.
av-pattern	Send a trap when AntiVirus finds file matching pattern.
av-fragmented	Send a trap when AntiVirus finds a fragmented file.
fm-if-change	Send a trap when FortiManager interface changes. Send a FortiManager trap.
fm-conf-change	Send a trap when a configuration change is made by a FortiGate administrator and the FortiGate is managed by FortiManager.
bgp-established	Send a trap when a BGP FSM transitions to the established state.
bgp-backward-transition	Send a trap when a BGP FSM goes from a high numbered state to a lower numbered state.
ha-member-up	Send a trap when an HA cluster member goes up.
ha-member-down	Send a trap when an HA cluster member goes down.
ent-conf-change	Send a trap when an entity MIB change occurs (RFC4133).
av-conserve	Send a trap when the FortiGate enters conserve mode.
av-bypass	Send a trap when the FortiGate enters bypass mode.
av-oversize-passed	Send a trap when AntiVirus passes an oversized file.
av-oversize-blocked	Send a trap when AntiVirus blocks an oversized file.
ips-pkg-update	Send a trap when the IPS signature database or engine is updated.
ips-fail-open	Send a trap when the IPS network buffer is full.
temperature-high	Send a trap when a temperature sensor registers a temperature that is too high.
voltage-alert	Send a trap when a voltage sensor registers a voltage that is outside of the normal range.
power-supply-failure	Send a trap when a power supply fails.
faz-disconnect	Send a trap when a FortiAnalyzer disconnects from the FortiGate.
wc-ap-up	Send a trap when a managed FortiAP comes up.
wc-ap-down	Send a trap when a managed FortiAP goes down.
fswctl-session-up	Send a trap when a FortiSwitch controller session comes up.
fswctl-session-down	Send a trap when a FortiSwitch controller session goes down.
load-balance-real-server-down	Send a trap when a server load balance real server goes down.
device-new	Send a trap when a new device is found.
per-cpu-high	Send a trap when per-CPU usage is high.
dhcp	Send a trap when the DHCP server exhausts the IP pool, an IP address already is in use, or a DHCP client interface received a DHCP-NAK.
pool-usage	Send a trap about ippool usage.

** Values may differ between models.

config hosts

Parameter

Description

Type

Size

Default

source-ip

Source IPv4 address for SNMP traps.

ipv4-address

Not Specified

0.0.0.0

IPv4 address of the SNMP manager (host).

user

Not Specified

ha-direct

Enable/disable direct management of HA cluster members.

option

disable

Option	Description
enable	Enable setting.
disable	Disable setting.

host-type

Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. No traps will be sent when IP type is subnet.

option

any

Option	Description
any	Accept queries from and send traps to this SNMP manager.
query	Accept queries from this SNMP manager but do not send traps.
trap	Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager.

config hosts6

Parameter

Description

Type

Size

Default

source-ipv6

Source IPv6 address for SNMP traps.

ipv6-address

Not Specified

ipv6

SNMP manager IPv6 address prefix.

ipv6-prefix

Not Specified

::/0

ha-direct

Enable/disable direct management of HA cluster members.

option

disable

Option	Description
enable	Enable setting.
disable	Disable setting.

host-type

Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both.

option

any

Option	Description
any	Accept queries from and send traps to this SNMP manager.
query	Accept queries from this SNMP manager but do not send traps.
trap	Send traps to this SNMP manager but do not accept SNMP queries from this SNMP manager.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config system snmp community

config system snmp community

config system snmp community

config hosts

config hosts6

config system snmp community

config system snmp community

config system snmp community

config hosts

config hosts6