CLI Reference

alertemail
- alertemail setting
antivirus
- antivirus heuristic
- antivirus profile
- antivirus quarantine
- antivirus settings
application
- application custom
- application group
- application list
- application name
- application rule-settings
authentication
- authentication rule
- authentication scheme
- authentication setting
certificate
- certificate ca
- certificate crl
- certificate local
- certificate remote
cifs
- cifs domain-controller
- cifs profile
dlp
- dlp filepattern
- dlp fp-doc-source
- dlp sensitivity
- dlp sensor
- dlp settings
dnsfilter
- dnsfilter domain-filter
- dnsfilter profile
emailfilter
- emailfilter bwl
- emailfilter bword
- emailfilter dnsbl
- emailfilter fortishield
- emailfilter iptrust
- emailfilter mheader
- emailfilter options
- emailfilter profile
endpoint-control
- endpoint-control fctems
- endpoint-control settings
extender-controller
- extender-controller extender
firewall
- firewall DoS-policy
- firewall DoS-policy6
- firewall acl
- firewall acl6
- firewall address
- firewall address6
- firewall address6-template
- firewall addrgrp
- firewall addrgrp6
- firewall auth-portal
- firewall central-snat-map
- firewall consolidated policy
- firewall dnstranslation
- firewall identity-based-route
- firewall interface-policy
- firewall interface-policy6
- firewall internet-service
- firewall internet-service-addition
- firewall internet-service-append
- firewall internet-service-custom
- firewall internet-service-custom-group
- firewall internet-service-definition
- firewall internet-service-extension
- firewall internet-service-group
- firewall internet-service-ipbl-reason
- firewall internet-service-ipbl-vendor
- firewall internet-service-list
- firewall internet-service-owner
- firewall internet-service-reputation
- firewall internet-service-sld
- firewall ip-translation
- firewall ipmacbinding setting
- firewall ipmacbinding table
- firewall ippool
- firewall ippool6
- firewall ldb-monitor
- firewall local-in-policy
- firewall local-in-policy6
- firewall multicast-address
- firewall multicast-address6
- firewall multicast-policy
- firewall multicast-policy6
- firewall policy
- firewall policy46
- firewall policy6
- firewall policy64
- firewall profile-group
- firewall profile-protocol-options
- firewall proxy-address
- firewall proxy-addrgrp
- firewall proxy-policy
- firewall schedule group
- firewall schedule onetime
- firewall schedule recurring
- firewall security-policy
- firewall service category
- firewall service custom
- firewall service group
- firewall shaper per-ip-shaper
- firewall shaper traffic-shaper
- firewall shaping-policy
- firewall shaping-profile
- firewall sniffer
- firewall ssh host-key
- firewall ssh local-ca
- firewall ssh local-key
- firewall ssh setting
- firewall ssl setting
- firewall ssl-server
- firewall ssl-ssh-profile
- firewall traffic-class
- firewall ttl-policy
- firewall vip
- firewall vip46
- firewall vip6
- firewall vip64
- firewall vipgrp
- firewall vipgrp46
- firewall vipgrp6
- firewall vipgrp64
- firewall wildcard-fqdn custom
- firewall wildcard-fqdn group
ftp-proxy
- ftp-proxy explicit
icap
- icap profile
- icap server
ips
- ips custom
- ips decoder
- ips global
- ips rule
- ips rule-settings
- ips sensor
- ips settings
- ips view-map
log
- log custom-field
- log disk filter
- log disk setting
- log eventfilter
- log fortianalyzer filter
- log fortianalyzer override-filter
- log fortianalyzer override-setting
- log fortianalyzer setting
- log fortianalyzer-cloud filter
- log fortianalyzer-cloud override-filter
- log fortianalyzer-cloud override-setting
- log fortianalyzer-cloud setting
- log fortianalyzer2 filter
- log fortianalyzer2 override-filter
- log fortianalyzer2 override-setting
- log fortianalyzer2 setting
- log fortianalyzer3 filter
- log fortianalyzer3 override-filter
- log fortianalyzer3 override-setting
- log fortianalyzer3 setting
- log fortiguard filter
- log fortiguard override-filter
- log fortiguard override-setting
- log fortiguard setting
- log gui-display
- log memory filter
- log memory global-setting
- log memory setting
- log null-device filter
- log null-device setting
- log setting
- log syslogd filter
- log syslogd override-filter
- log syslogd override-setting
- log syslogd setting
- log syslogd2 filter
- log syslogd2 override-filter
- log syslogd2 override-setting
- log syslogd2 setting
- log syslogd3 filter
- log syslogd3 override-filter
- log syslogd3 override-setting
- log syslogd3 setting
- log syslogd4 filter
- log syslogd4 override-filter
- log syslogd4 override-setting
- log syslogd4 setting
- log threat-weight
- log webtrends filter
- log webtrends setting
monitoring
- monitoring np6-ipsec-engine
report
- report chart
- report dataset
- report layout
- report setting
- report style
- report theme
router
- router access-list
- router access-list6
- router aspath-list
- router auth-path
- router bfd
- router bfd6
- router bgp
- router community-list
- router isis
- router key-chain
- router multicast
- router multicast-flow
- router multicast6
- router ospf
- router ospf6
- router policy
- router policy6
- router prefix-list
- router prefix-list6
- router rip
- router ripng
- router route-map
- router setting
- router static
- router static6
ssh-filter
- ssh-filter profile
switch-controller
- switch-controller auto-config custom
- switch-controller auto-config default
- switch-controller auto-config policy
- switch-controller custom-command
- switch-controller lldp-profile
- switch-controller lldp-settings
- switch-controller location
- switch-controller managed-switch
- switch-controller poe
- switch-controller qos dot1p-map
- switch-controller qos ip-dscp-map
- switch-controller qos qos-policy
- switch-controller qos queue-policy
- switch-controller remote-log
- switch-controller security-policy 802-1X
- switch-controller security-policy local-access
- switch-controller snmp-community
- switch-controller snmp-user
- switch-controller storm-control-policy
- switch-controller stp-instance
- switch-controller stp-settings
- switch-controller switch-group
- switch-controller switch-interface-tag
- switch-controller switch-profile
- switch-controller traffic-policy
- switch-controller virtual-port-pool
system
- system 3g-modem custom
- system accprofile
- system admin
- system alarm
- system alias
- system api-user
- system arp-table
- system auto-install
- system auto-script
- system automation-action
- system automation-destination
- system automation-stitch
- system automation-trigger
- system autoupdate push-update
- system autoupdate schedule
- system autoupdate tunneling
- system central-management
- system cluster-sync
- system console
- system csf
- system custom-language
- system ddns
- system dedicated-mgmt
- system dhcp server
- system dhcp6 server
- system dns
- system dns-database
- system dns-server
- system dscp-based-priority
- system email-server
- system external-resource
- system fips-cc
- system fortiguard
- system fortimanager
- system fortisandbox
- system fsso-polling
- system ftm-push
- system geneve
- system geoip-country
- system geoip-override
- system global
- system gre-tunnel
- system ha
- system ha-monitor
- system interface
- system ipip-tunnel
- system ips-urlfilter-dns
- system ips-urlfilter-dns6
- system ipsec-aggregate
- system ipv6-neighbor-cache
- system ipv6-tunnel
- system isf-queue-profile
- system link-monitor
- system lldp network-policy
- system lte-modem
- system mac-address-table
- system mobile-tunnel
- system modem
- system nat64
- system nd-proxy
- system netflow
- system network-visibility
- system np6
- system npu
- system ntp
- system object-tagging
- system password-policy
- system password-policy-guest-admin
- system pppoe-interface
- system probe-response
- system proxy-arp
- system ptp
- system replacemsg admin
- system replacemsg alertmail
- system replacemsg auth
- system replacemsg device-detection-portal
- system replacemsg fortiguard-wf
- system replacemsg ftp
- system replacemsg http
- system replacemsg icap
- system replacemsg mail
- system replacemsg nac-quar
- system replacemsg nntp
- system replacemsg spam
- system replacemsg sslvpn
- system replacemsg traffic-quota
- system replacemsg utm
- system replacemsg webproxy
- system replacemsg-group
- system replacemsg-image
- system resource-limits
- system saml
- system sdn-connector
- system session-helper
- system session-ttl
- system settings
- system sflow
- system sit-tunnel
- system sms-server
- system snmp community
- system snmp sysinfo
- system snmp user
- system speed-test-server
- system sso-admin
- system storage
- system switch-interface
- system tos-based-priority
- system vdom
- system vdom-dns
- system vdom-exception
- system vdom-link
- system vdom-netflow
- system vdom-property
- system vdom-radius-server
- system vdom-sflow
- system virtual-wan-link
- system virtual-wire-pair
- system vxlan
- system wccp
- system zone
user
- user adgrp
- user domain-controller
- user exchange
- user fortitoken
- user fsso
- user fsso-polling
- user group
- user krb-keytab
- user ldap
- user local
- user password-policy
- user peer
- user peergrp
- user pop3
- user radius
- user saml
- user security-exempt-list
- user setting
- user tacacs+
voip
- voip profile
vpn
- vpn certificate ca
- vpn certificate crl
- vpn certificate local
- vpn certificate ocsp-server
- vpn certificate remote
- vpn certificate setting
- vpn ipsec concentrator
- vpn ipsec forticlient
- vpn ipsec manualkey
- vpn ipsec manualkey-interface
- vpn ipsec phase1
- vpn ipsec phase1-interface
- vpn ipsec phase2
- vpn ipsec phase2-interface
- vpn l2tp
- vpn ocvpn
- vpn pptp
- vpn ssl settings
- vpn ssl web host-check-software
- vpn ssl web portal
- vpn ssl web realm
- vpn ssl web user-bookmark
- vpn ssl web user-group-bookmark
waf
- waf main-class
- waf profile
- waf signature
- waf sub-class
wanopt
- wanopt auth-group
- wanopt cache-service
- wanopt content-delivery-network-rule
- wanopt peer
- wanopt profile
- wanopt remote-storage
- wanopt settings
- wanopt webcache
web-proxy
- web-proxy debug-url
- web-proxy explicit
- web-proxy forward-server
- web-proxy forward-server-group
- web-proxy global
- web-proxy profile
- web-proxy url-match
- web-proxy wisp
webfilter
- webfilter content
- webfilter content-header
- webfilter fortiguard
- webfilter ftgd-local-cat
- webfilter ftgd-local-rating
- webfilter ips-urlfilter-cache-setting
- webfilter ips-urlfilter-setting
- webfilter ips-urlfilter-setting6
- webfilter override
- webfilter profile
- webfilter search-engine
- webfilter urlfilter
wireless-controller
- wireless-controller address
- wireless-controller addrgrp
- wireless-controller ap-status
- wireless-controller ble-profile
- wireless-controller bonjour-profile
- wireless-controller global
- wireless-controller hotspot20 anqp-3gpp-cellular
- wireless-controller hotspot20 anqp-ip-address-type
- wireless-controller hotspot20 anqp-nai-realm
- wireless-controller hotspot20 anqp-network-auth-type
- wireless-controller hotspot20 anqp-roaming-consortium
- wireless-controller hotspot20 anqp-venue-name
- wireless-controller hotspot20 h2qp-conn-capability
- wireless-controller hotspot20 h2qp-operator-name
- wireless-controller hotspot20 h2qp-osu-provider
- wireless-controller hotspot20 h2qp-wan-metric
- wireless-controller hotspot20 hs-profile
- wireless-controller hotspot20 icon
- wireless-controller hotspot20 qos-map
- wireless-controller inter-controller
- wireless-controller log
- wireless-controller qos-profile
- wireless-controller region
- wireless-controller setting
- wireless-controller snmp
- wireless-controller timers
- wireless-controller utm-profile
- wireless-controller vap
- wireless-controller vap-group
- wireless-controller wag-profile
- wireless-controller wids-profile
- wireless-controller wtp
- wireless-controller wtp-group
- wireless-controller wtp-profile

Home FortiGate / FortiOS 6.2.5 CLI Reference

6.2.5

system interface

Configure interfaces.

  config system interface
      Description: Configure interfaces.
      edit <name>
          set vdom {string}
          set vrf {integer}
          set cli-conn-status {integer}
          set fortilink [enable|disable]
          set mode [static|dhcp|...]
          set distance {integer}
          set priority {integer}
          set dhcp-relay-interface-select-method [auto|sdwan|...]
          set dhcp-relay-interface {string}
          set dhcp-relay-service [disable|enable]
          set dhcp-relay-ip {user}
          set dhcp-relay-type [regular|ipsec]
          set dhcp-relay-agent-option [enable|disable]
          set management-ip {ipv4-classnet-host}
          set ip {ipv4-classnet-host}
          set allowaccess {option1}, {option2}, ...
          set gwdetect [enable|disable]
          set ping-serv-status {integer}
          set detectserver {user}
          set detectprotocol {option1}, {option2}, ...
          set ha-priority {integer}
          set fail-detect [enable|disable]
          set fail-detect-option {option1}, {option2}, ...
          set fail-alert-method [link-failed-signal|link-down]
          set fail-action-on-extender [soft-restart|hard-restart|...]
          set fail-alert-interfaces <name1>, <name2>, ...
          set dhcp-client-identifier {string}
          set dhcp-renew-time {integer}
          set ipunnumbered {ipv4-address}
          set username {string}
          set pppoe-unnumbered-negotiate [enable|disable]
          set password {password}
          set idle-timeout {integer}
          set detected-peer-mtu {integer}
          set disc-retry-timeout {integer}
          set padt-retry-timeout {integer}
          set service-name {string}
          set ac-name {string}
          set lcp-echo-interval {integer}
          set lcp-max-echo-fails {integer}
          set defaultgw [enable|disable]
          set dns-server-override [enable|disable]
          set auth-type [auto|pap|...]
          set pptp-client [enable|disable]
          set pptp-user {string}
          set pptp-password {password}
          set pptp-server-ip {ipv4-address}
          set pptp-auth-type [auto|pap|...]
          set pptp-timeout {integer}
          set arpforward [enable|disable]
          set ndiscforward [enable|disable]
          set broadcast-forward [enable|disable]
          set bfd [global|enable|...]
          set bfd-desired-min-tx {integer}
          set bfd-detect-mult {integer}
          set bfd-required-min-rx {integer}
          set l2forward [enable|disable]
          set icmp-send-redirect [enable|disable]
          set icmp-accept-redirect [enable|disable]
          set vlanforward [enable|disable]
          set stpforward [enable|disable]
          set stpforward-mode [rpl-all-ext-id|rpl-bridge-ext-id|...]
          set ips-sniffer-mode [enable|disable]
          set ident-accept [enable|disable]
          set ipmac [enable|disable]
          set subst [enable|disable]
          set macaddr {mac-address}
          set substitute-dst-mac {mac-address}
          set speed [auto|10full|...]
          set status [up|down]
          set netbios-forward [disable|enable]
          set wins-ip {ipv4-address}
          set type [physical|vlan|...]
          set dedicated-to [none|management]
          set trust-ip-1 {ipv4-classnet-any}
          set trust-ip-2 {ipv4-classnet-any}
          set trust-ip-3 {ipv4-classnet-any}
          set trust-ip6-1 {ipv6-prefix}
          set trust-ip6-2 {ipv6-prefix}
          set trust-ip6-3 {ipv6-prefix}
          set mtu-override [enable|disable]
          set mtu {integer}
          set wccp [enable|disable]
          set netflow-sampler [disable|tx|...]
          set sflow-sampler [enable|disable]
          set drop-overlapped-fragment [enable|disable]
          set drop-fragment [enable|disable]
          set src-check [enable|disable]
          set sample-rate {integer}
          set polling-interval {integer}
          set sample-direction [tx|rx|...]
          set explicit-web-proxy [enable|disable]
          set explicit-ftp-proxy [enable|disable]
          set proxy-captive-portal [enable|disable]
          set tcp-mss {integer}
          set inbandwidth {integer}
          set outbandwidth {integer}
          set egress-shaping-profile {string}
          set ingress-shaping-profile {string}
          set disconnect-threshold {integer}
          set spillover-threshold {integer}
          set ingress-spillover-threshold {integer}
          set weight {integer}
          set interface {string}
          set external [enable|disable]
          set vlanid {integer}
          set forward-domain {integer}
          set remote-ip {ipv4-classnet-host}
          set member <interface-name1>, <interface-name2>, ...
          set lacp-mode [static|passive|...]
          set lacp-ha-slave [enable|disable]
          set lacp-speed [slow|fast]
          set min-links {integer}
          set min-links-down [operational|administrative]
          set algorithm [L2|L3|...]
          set link-up-delay {integer}
          set priority-override [enable|disable]
          set aggregate {string}
          set redundant-interface {string}
          set devindex {integer}
          set vindex {integer}
          set switch {string}
          set description {var-string}
          set alias {string}
          set security-mode [none|captive-portal|...]
          set security-mac-auth-bypass [mac-auth-only|enable|...]
          set security-external-web {string}
          set security-external-logout {string}
          set replacemsg-override-group {string}
          set security-redirect-url {string}
          set security-exempt-list {string}
          set security-groups <name1>, <name2>, ...
          set device-identification [enable|disable]
          set device-user-identification [enable|disable]
          set lldp-reception [enable|disable|...]
          set lldp-transmission [enable|disable|...]
          set lldp-network-policy {string}
          set broadcast-forticlient-discovery [enable|disable]
          set estimated-upstream-bandwidth {integer}
          set estimated-downstream-bandwidth {integer}
          set vrrp-virtual-mac [enable|disable]
          config vrrp
              Description: VRRP configuration.
              edit <vrid>
                  set version [2|3]
                  set vrgrp {integer}
                  set vrip {ipv4-address-any}
                  set priority {integer}
                  set adv-interval {integer}
                  set start-time {integer}
                  set preempt [enable|disable]
                  set accept-mode [enable|disable]
                  set vrdst {ipv4-address-any}
                  set vrdst-priority {integer}
                  set ignore-default-route [enable|disable]
                  set status [enable|disable]
                  config proxy-arp
                      Description: VRRP Proxy ARP configuration.
                      edit <id>
                          set ip {user}
                      next
                  end
              next
          end
          set role [lan|wan|...]
          set snmp-index {integer}
          set secondary-IP [enable|disable]
          config secondaryip
              Description: Second IP address of interface.
              edit <id>
                  set ip {ipv4-classnet-host}
                  set allowaccess {option1}, {option2}, ...
                  set gwdetect [enable|disable]
                  set ping-serv-status {integer}
                  set detectserver {user}
                  set detectprotocol {option1}, {option2}, ...
                  set ha-priority {integer}
              next
          end
          set preserve-session-route [enable|disable]
          set auto-auth-extension-device [enable|disable]
          set ap-discover [enable|disable]
          set fortilink-stacking [enable|disable]
          set fortilink-neighbor-detect [lldp|fortilink]
          set fortilink-split-interface [enable|disable]
          set internal {integer}
          set fortilink-backup-link {integer}
          set switch-controller-access-vlan [enable|disable]
          set switch-controller-traffic-policy {string}
          set switch-controller-rspan-mode [disable|enable]
          set switch-controller-igmp-snooping [enable|disable]
          set switch-controller-igmp-snooping-proxy [enable|disable]
          set switch-controller-igmp-snooping-fast-leave [enable|disable]
          set switch-controller-dhcp-snooping [enable|disable]
          set switch-controller-dhcp-snooping-verify-mac [enable|disable]
          set switch-controller-dhcp-snooping-option82 [enable|disable]
          set switch-controller-arp-inspection [enable|disable]
          set switch-controller-learning-limit {integer}
          set color {integer}
          config tagging
              Description: Config object tagging.
              edit <name>
                  set category {string}
                  set tags <name1>, <name2>, ...
              next
          end
          config egress-queues
              Description: Configure queues of NP port on egress path.
              set cos0 {string}
              set cos1 {string}
              set cos2 {string}
              set cos3 {string}
              set cos4 {string}
              set cos5 {string}
              set cos6 {string}
              set cos7 {string}
          end
          set ingress-cos [disable|cos0|...]
          set egress-cos [disable|cos0|...]
          config ipv6
              Description: IPv6 of interface.
              set ip6-mode [static|dhcp|...]
              set nd-mode [basic|SEND-compatible]
              set nd-cert {string}
              set nd-security-level {integer}
              set nd-timestamp-delta {integer}
              set nd-timestamp-fuzz {integer}
              set nd-cga-modifier {user}
              set ip6-dns-server-override [enable|disable]
              set ip6-address {ipv6-prefix}
              config ip6-extra-addr
                  Description: Extra IPv6 address prefixes of interface.
                  edit <prefix>

                  next
              end
              set ip6-allowaccess {option1}, {option2}, ...
              set ip6-send-adv [enable|disable]
              set ip6-manage-flag [enable|disable]
              set ip6-other-flag [enable|disable]
              set ip6-max-interval {integer}
              set ip6-min-interval {integer}
              set ip6-link-mtu {integer}
              set ip6-reachable-time {integer}
              set ip6-retrans-time {integer}
              set ip6-default-life {integer}
              set ip6-hop-limit {integer}
              set autoconf [enable|disable]
              set ip6-upstream-interface {string}
              set ip6-subnet {ipv6-prefix}
              config ip6-prefix-list
                  Description: Advertised prefix list.
                  edit <prefix>
                      set autonomous-flag [enable|disable]
                      set onlink-flag [enable|disable]
                      set valid-life-time {integer}
                      set preferred-life-time {integer}
                      set rdnss {user}
                      set dnssl <domain1>, <domain2>, ...
                  next
              end
              config ip6-delegated-prefix-list
                  Description: Advertised IPv6 delegated prefix list.
                  edit <prefix-id>
                      set upstream-interface {string}
                      set autonomous-flag [enable|disable]
                      set onlink-flag [enable|disable]
                      set subnet {ipv6-network}
                      set rdnss-service [delegated|default|...]
                      set rdnss {user}
                  next
              end
              set dhcp6-relay-service [disable|enable]
              set dhcp6-relay-type {option}
              set dhcp6-relay-ip {user}
              set dhcp6-client-options {option1}, {option2}, ...
              set dhcp6-prefix-delegation [enable|disable]
              set dhcp6-information-request [enable|disable]
              set dhcp6-prefix-hint {ipv6-network}
              set dhcp6-prefix-hint-plt {integer}
              set dhcp6-prefix-hint-vlt {integer}
              set vrrp-virtual-mac6 [enable|disable]
              set vrip6_link_local {ipv6-address}
              config vrrp6
                  Description: IPv6 VRRP configuration.
                  edit <vrid>
                      set vrgrp {integer}
                      set vrip6 {ipv6-address}
                      set priority {integer}
                      set adv-interval {integer}
                      set start-time {integer}
                      set preempt [enable|disable]
                      set accept-mode [enable|disable]
                      set vrdst6 {ipv6-address}
                      set status [enable|disable]
                  next
              end
          end
      next
  end

config system interface

Parameter Name	Description	Type	Size
vdom	Interface is in this virtual domain (VDOM).	string	Maximum length: 31
vrf	Virtual Routing Forwarding ID.	integer	Minimum value: 0 Maximum value: 31
cli-conn-status	CLI connection status.	integer	Minimum value: 0 Maximum value: 4294967295
fortilink	Enable FortiLink to dedicate this interface to manage other Fortinet devices. enable: Enable FortiLink to dedicated interface for managing FortiSwitch devices. disable: Disable FortiLink to dedicated interface for managing FortiSwitch devices.	option	-
mode	Addressing mode (static, DHCP, PPPoE). static: Static setting. dhcp: External DHCP client mode. pppoe: External PPPoE mode.	option	-
distance	Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.	integer	Minimum value: 1 Maximum value: 255
priority	Priority of learned routes.	integer	Minimum value: 0 Maximum value: 4294967295
dhcp-relay-interface-select-method	Specify how to select outgoing interface to reach server. auto: Set outgoing interface automatically. sdwan: Set outgoing interface by SD-WAN or policy routing rules. specify: Set outgoing interface manually.	option	-
dhcp-relay-interface	Specify outgoing interface to reach server.	string	Maximum length: 15
dhcp-relay-service	Enable/disable allowing this interface to act as a DHCP relay. disable: None. enable: DHCP relay agent.	option	-
dhcp-relay-ip	DHCP relay IP address.	user	Not Specified
dhcp-relay-type	DHCP relay type (regular or IPsec). regular: Regular DHCP relay. ipsec: DHCP relay for IPsec.	option	-
dhcp-relay-agent-option	Enable/disable DHCP relay agent option. enable: Enable DHCP relay agent option. disable: Disable DHCP relay agent option.	option	-
management-ip	High Availability in-band management IP address of this interface.	ipv4-classnet-host	Not Specified
ip	Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.	ipv4-classnet-host	Not Specified
allowaccess	Permitted types of management access to this interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access.	option	-
gwdetect	Enable/disable detect gateway alive for first. enable: Enable detect gateway alive for first. disable: Disable detect gateway alive for first.	option	-
ping-serv-status	PING server status.	integer	Minimum value: 0 Maximum value: 255
detectserver	Gateway's ping server for this IP.	user	Not Specified
detectprotocol	Protocols used to detect the server. ping: PING. tcp-echo: TCP echo. udp-echo: UDP echo.	option	-
ha-priority	HA election priority for the PING server.	integer	Minimum value: 1 Maximum value: 50
fail-detect	Enable/disable fail detection features for this interface. enable: Enable interface failed option status. disable: Disable interface failed option status.	option	-
fail-detect-option	Options for detecting that this interface has failed. detectserver: Use a ping server to determine if the interface has failed. link-down: Use port detection to determine if the interface has failed.	option	-
fail-alert-method	Select link-failed-signal or link-down method to alert about a failed link. link-failed-signal: Link-failed-signal. link-down: Link-down.	option	-
fail-action-on-extender	Action on extender when interface fail . soft-restart: Soft-restart-on-extender. hard-restart: Hard-restart-on-extender. reboot: Reboot-on-extender.	option	-
fail-alert-interfaces `<name>`	Names of the FortiGate interfaces to which the link failure alert is sent. Names of the non-virtual interface.	string	Maximum length: 79
dhcp-client-identifier	DHCP client identifier.	string	Maximum length: 48
dhcp-renew-time	DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.	integer	Minimum value: 300 Maximum value: 604800
ipunnumbered	Unnumbered IP used for PPPoE interfaces for which no unique local address is provided.	ipv4-address	Not Specified
username	Username of the PPPoE account, provided by your ISP.	string	Maximum length: 64
pppoe-unnumbered-negotiate	Enable/disable PPPoE unnumbered negotiation. enable: Enable IP address negotiating for unnumbered. disable: Disable IP address negotiating for unnumbered.	option	-
password	PPPoE account's password.	password	Not Specified
idle-timeout	PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.	integer	Minimum value: 0 Maximum value: 32767
detected-peer-mtu	MTU of detected peer (0 - 4294967295).	integer	Minimum value: 0 Maximum value: 4294967295
disc-retry-timeout	Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.	integer	Minimum value: 0 Maximum value: 4294967295
padt-retry-timeout	PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.	integer	Minimum value: 0 Maximum value: 4294967295
service-name	PPPoE service name.	string	Maximum length: 63
ac-name	PPPoE server name.	string	Maximum length: 63
lcp-echo-interval	Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.	integer	Minimum value: 0 Maximum value: 32767
lcp-max-echo-fails	Maximum missed LCP echo messages before disconnect.	integer	Minimum value: 0 Maximum value: 32767
defaultgw	Enable to get the gateway IP from the DHCP or PPPoE server. enable: Enable default gateway. disable: Disable default gateway.	option	-
dns-server-override	Enable/disable use DNS acquired by DHCP or PPPoE. enable: Use DNS acquired by DHCP or PPPoE. disable: No not use DNS acquired by DHCP or PPPoE.	option	-
auth-type	PPP authentication type to use. auto: Automatically choose authentication. pap: PAP authentication. chap: CHAP authentication. mschapv1: MS-CHAPv1 authentication. mschapv2: MS-CHAPv2 authentication.	option	-
pptp-client	Enable/disable PPTP client. enable: Enable PPTP client. disable: Disable PPTP client.	option	-
pptp-user	PPTP user name.	string	Maximum length: 64
pptp-password	PPTP password.	password	Not Specified
pptp-server-ip	PPTP server IP address.	ipv4-address	Not Specified
pptp-auth-type	PPTP authentication type. auto: Automatically choose authentication. pap: PAP authentication. chap: CHAP authentication. mschapv1: MS-CHAPv1 authentication. mschapv2: MS-CHAPv2 authentication.	option	-
pptp-timeout	Idle timer in minutes (0 for disabled).	integer	Minimum value: 0 Maximum value: 65535
arpforward	Enable/disable ARP forwarding. enable: Enable ARP forwarding. disable: Disable ARP forwarding.	option	-
ndiscforward	Enable/disable NDISC forwarding. enable: Enable NDISC forwarding. disable: Disable NDISC forwarding.	option	-
broadcast-forward	Enable/disable broadcast forwarding. enable: Enable broadcast forwarding. disable: Disable broadcast forwarding.	option	-
bfd	Bidirectional Forwarding Detection (BFD) settings. global: BFD behavior of this interface will be based on global configuration. enable: Enable BFD on this interface and ignore global configuration. disable: Disable BFD on this interface and ignore global configuration.	option	-
bfd-desired-min-tx	BFD desired minimal transmit interval.	integer	Minimum value: 1 Maximum value: 100000
bfd-detect-mult	BFD detection multiplier.	integer	Minimum value: 1 Maximum value: 50
bfd-required-min-rx	BFD required minimal receive interval.	integer	Minimum value: 1 Maximum value: 100000
l2forward	Enable/disable l2 forwarding. enable: Enable L2 forwarding. disable: Disable L2 forwarding.	option	-
icmp-send-redirect	Enable/disable ICMP send redirect. enable: Enable ICMP send redirect. disable: Disable ICMP send redirect.	option	-
icmp-accept-redirect	Enable/disable ICMP accept redirect. enable: Enable ICMP accept redirect. disable: Disable ICMP accept redirect.	option	-
vlanforward	Enable/disable traffic forwarding between VLANs on this interface. enable: Enable traffic forwarding. disable: Disable traffic forwarding.	option	-
stpforward	Enable/disable STP forwarding. enable: Enable STP forwarding. disable: Disable STP forwarding.	option	-
stpforward-mode	Configure STP forwarding mode. rpl-all-ext-id: Replace all extension IDs (root, bridge). rpl-bridge-ext-id: Replace the bridge extension ID only. rpl-nothing: Replace nothing.	option	-
ips-sniffer-mode	Enable/disable the use of this interface as a one-armed sniffer. enable: Enable IPS sniffer mode. disable: Disable IPS sniffer mode.	option	-
ident-accept	Enable/disable authentication for this interface. enable: Enable determining a user's identity from packet identification. disable: Disable determining a user's identity from packet identification.	option	-
ipmac	Enable/disable IP/MAC binding. enable: Enable IP/MAC binding. disable: Disable IP/MAC binding.	option	-
subst	Enable to always send packets from this interface to a destination MAC address. enable: Send packets from this interface. disable: Do not send packets from this interface.	option	-
macaddr	Change the interface's MAC address.	mac-address	Not Specified
substitute-dst-mac	Destination MAC address that all packets are sent to from this interface.	mac-address	Not Specified
speed	Interface speed. The default setting and the options available depend on the interface hardware. auto: Automatically adjust speed. 10full: 10M full-duplex. 10half: 10M half-duplex. 100full: 100M full-duplex. 100half: 100M half-duplex. 1000full: 1000M full-duplex. 1000half: 1000M half-duplex. 1000auto: 1000M auto adjust. 10000full: 10G full-duplex.	option	-
status	Bring the interface up or shut the interface down. up: Bring the interface up. down: Shut the interface down.	option	-
netbios-forward	Enable/disable NETBIOS forwarding. disable: Disable NETBIOS forwarding. enable: Enable NETBIOS forwarding.	option	-
wins-ip	WINS server IP.	ipv4-address	Not Specified
type	Interface type. physical: Physical interface. vlan: VLAN interface. aggregate: Aggregate interface. redundant: Redundant interface. tunnel: Tunnel interface. vdom-link: VDOM link interface. loopback: Loopback interface. switch: Software switch interface. vap-switch: VAP interface. wl-mesh: WLAN mesh interface. fext-wan: FortiExtender interface. vxlan: VXLAN interface. geneve: GENEVE interface. hdlc: T1/E1 interface. switch-vlan: Switch VLAN interface. emac-vlan: EMAC VLAN interface.	option	-
dedicated-to	Configure interface for single purpose. none: Interface not dedicated for any purpose. management: Dedicate this interface for management purposes only.	option	-
trust-ip-1	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip-2	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip-3	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip6-1	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
trust-ip6-2	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
trust-ip6-3	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
mtu-override	Enable to set a custom MTU for this interface. enable: Override default MTU. disable: Use default MTU (1500).	option	-
mtu	MTU value for this interface.	integer	Minimum value: 0 Maximum value: 4294967295
wccp	Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers. enable: Enable WCCP protocol on this interface. disable: Disable WCCP protocol on this interface.	option	-
netflow-sampler	Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both). disable: Disable NetFlow protocol on this interface. tx: Monitor transmitted traffic on this interface. rx: Monitor received traffic on this interface. both: Monitor transmitted/received traffic on this interface.	option	-
sflow-sampler	Enable/disable sFlow on this interface. enable: Enable sFlow protocol on this interface. disable: Disable sFlow protocol on this interface.	option	-
drop-overlapped-fragment	Enable/disable drop overlapped fragment packets. enable: Enable drop of overlapped fragment packets. disable: Disable drop of overlapped fragment packets.	option	-
drop-fragment	Enable/disable drop fragment packets. enable: Enable/disable drop fragment packets. disable: Do not drop fragment packets.	option	-
src-check	Enable/disable source IP check. enable: Enable source IP check. disable: Disable source IP check.	option	-
sample-rate	sFlow sample rate (10 - 99999).	integer	Minimum value: 10 Maximum value: 99999
polling-interval	sFlow polling interval (1 - 255 sec).	integer	Minimum value: 1 Maximum value: 255
sample-direction	Data that NetFlow collects (rx, tx, or both). tx: Monitor transmitted traffic on this interface. rx: Monitor received traffic on this interface. both: Monitor transmitted/received traffic on this interface.	option	-
explicit-web-proxy	Enable/disable the explicit web proxy on this interface. enable: Enable explicit Web proxy on this interface. disable: Disable explicit Web proxy on this interface.	option	-
explicit-ftp-proxy	Enable/disable the explicit FTP proxy on this interface. enable: Enable explicit FTP proxy on this interface. disable: Disable explicit FTP proxy on this interface.	option	-
proxy-captive-portal	Enable/disable proxy captive portal on this interface. enable: Enable proxy captive portal on this interface. disable: Disable proxy captive portal on this interface.	option	-
tcp-mss	TCP maximum segment size. 0 means do not change segment size.	integer	Minimum value: 0 Maximum value: 4294967295
inbandwidth	Bandwidth limit for incoming traffic (0 - 16776000 kbps), 0 means unlimited.	integer	Minimum value: 0 Maximum value: 16776000
outbandwidth	Bandwidth limit for outgoing traffic (0 - 16776000 kbps).	integer	Minimum value: 0 Maximum value: 16776000
egress-shaping-profile	Outgoing traffic shaping profile.	string	Maximum length: 35
ingress-shaping-profile	Incoming traffic shaping profile.	string	Maximum length: 35
disconnect-threshold	Time in milliseconds to wait before sending a notification that this interface is down or disconnected.	integer	Minimum value: 0 Maximum value: 10000
spillover-threshold	Egress Spillover threshold (0 - 16776000 kbps), 0 means unlimited.	integer	Minimum value: 0 Maximum value: 16776000
ingress-spillover-threshold	Ingress Spillover threshold (0 - 16776000 kbps).	integer	Minimum value: 0 Maximum value: 16776000
weight	Default weight for static routes (if route has no weight configured).	integer	Minimum value: 0 Maximum value: 255
interface	Interface name.	string	Maximum length: 15
external	Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet). enable: Enable identifying the interface as an external interface. disable: Disable identifying the interface as an external interface.	option	-
vlanid	VLAN ID (1 - 4094).	integer	Minimum value: 1 Maximum value: 4094
forward-domain	Transparent mode forward domain.	integer	Minimum value: 0 Maximum value: 2147483647
remote-ip	Remote IP address of tunnel.	ipv4-classnet-host	Not Specified
member `<interface-name>`	Physical interfaces that belong to the aggregate or redundant interface. Physical interface name.	string	Maximum length: 79
lacp-mode	LACP mode. static: Use static aggregation, do not send and ignore any LACP messages. passive: Passively use LACP to negotiate 802.3ad aggregation. active: Actively use LACP to negotiate 802.3ad aggregation.	option	-
lacp-ha-slave	LACP HA slave. enable: Allow HA slave to send/receive LACP messages. disable: Block HA slave from sending/receiving LACP messages.	option	-
lacp-speed	How often the interface sends LACP messages. slow: Send LACP message every 30 seconds. fast: Send LACP message every second.	option	-
min-links	Minimum number of aggregated ports that must be up.	integer	Minimum value: 1 Maximum value: 32
min-links-down	Action to take when less than the configured minimum number of links are active. operational: Set the aggregate operationally down. administrative: Set the aggregate administratively down.	option	-
algorithm	Frame distribution algorithm. L2: Use layer 2 address for distribution. L3: Use layer 3 address for distribution. L4: Use layer 4 information for distribution.	option	-
link-up-delay	Number of milliseconds to wait before considering a link is up.	integer	Minimum value: 50 Maximum value: 3600000
priority-override	Enable/disable fail back to higher priority port once recovered. enable: Enable fail back to higher priority port once recovered. disable: Disable fail back to higher priority port once recovered.	option	-
aggregate	Aggregate interface.	string	Maximum length: 15
redundant-interface	Redundant interface.	string	Maximum length: 15
devindex	Device Index.	integer	Minimum value: 0 Maximum value: 4294967295
vindex	Switch control interface VLAN ID.	integer	Minimum value: 0 Maximum value: 65535
switch	Contained in switch.	string	Maximum length: 15
description	Description.	var-string	Maximum length: 255
alias	Alias will be displayed with the interface name to make it easier to distinguish.	string	Maximum length: 25
security-mode	Turn on captive portal authentication for this interface. none: No security option. captive-portal: Captive portal authentication. 802.1X: 802.1X port-based authentication.	option	-
security-mac-auth-bypass	Enable/disable MAC authentication bypass. mac-auth-only: Enable MAC authentication bypass without EAP. enable: Enable MAC authentication bypass. disable: Disable MAC authentication bypass.	option	-
security-external-web	URL of external authentication web server.	string	Maximum length: 127
security-external-logout	URL of external authentication logout server.	string	Maximum length: 127
replacemsg-override-group	Replacement message override group.	string	Maximum length: 35
security-redirect-url	URL redirection after disclaimer/authentication.	string	Maximum length: 127
security-exempt-list	Name of security-exempt-list.	string	Maximum length: 35
security-groups `<name>`	User groups that can authenticate with the captive portal. Names of user groups that can authenticate with the captive portal.	string	Maximum length: 79
device-identification	Enable/disable passively gathering of device identity information about the devices on the network connected to this interface. enable: Enable passive gathering of identity information about hosts. disable: Disable passive gathering of identity information about hosts.	option	-
device-user-identification	Enable/disable passive gathering of user identity information about users on this interface. enable: Enable passive gathering of user identity information about users. disable: Disable passive gathering of user identity information about users.	option	-
lldp-reception	Enable/disable Link Layer Discovery Protocol (LLDP) reception. enable: Enable reception of Link Layer Discovery Protocol (LLDP). disable: Disable reception of Link Layer Discovery Protocol (LLDP). vdom: Use VDOM Link Layer Discovery Protocol (LLDP) reception configuration setting.	option	-
lldp-transmission	Enable/disable Link Layer Discovery Protocol (LLDP) transmission. enable: Enable transmission of Link Layer Discovery Protocol (LLDP). disable: Disable transmission of Link Layer Discovery Protocol (LLDP). vdom: Use VDOM Link Layer Discovery Protocol (LLDP) transmission configuration setting.	option	-
lldp-network-policy	LLDP-MED network policy profile.	string	Maximum length: 35
broadcast-forticlient-discovery	Enable/disable broadcasting FortiClient discovery messages. enable: Enable broadcasting FortiClient discovery messages. disable: Disable broadcasting FortiClient discovery messages.	option	-
estimated-upstream-bandwidth	Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.	integer	Minimum value: 0 Maximum value: 4294967295
estimated-downstream-bandwidth	Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.	integer	Minimum value: 0 Maximum value: 4294967295
vrrp-virtual-mac	Enable/disable use of virtual MAC for VRRP. enable: Enable use of virtual MAC for VRRP. disable: Disable use of virtual MAC for VRRP.	option	-
role	Interface role. lan: Connected to local network of endpoints. wan: Connected to Internet. dmz: Connected to server zone. undefined: Interface has no specific role.	option	-
snmp-index	Permanent SNMP Index of the interface.	integer	Minimum value: 0 Maximum value: 4294967295
secondary-IP	Enable/disable adding a secondary IP to this interface. enable: Enable secondary IP. disable: Disable secondary IP.	option	-
preserve-session-route	Enable/disable preservation of session route when dirty. enable: Enable preservation of session route when dirty. disable: Disable preservation of session route when dirty.	option	-
auto-auth-extension-device	Enable/disable automatic authorization of dedicated Fortinet extension device on this interface. enable: Enable automatic authorization of dedicated Fortinet extension device on this interface. disable: Disable automatic authorization of dedicated Fortinet extension device on this interface.	option	-
ap-discover	Enable/disable automatic registration of unknown FortiAP devices. enable: Enable automatic registration of unknown FortiAP devices. disable: Disable automatic registration of unknown FortiAP devices.	option	-
fortilink-stacking	Enable/disable FortiLink switch-stacking on this interface. enable: Enable FortiLink switch stacking. disable: Disable FortiLink switch stacking.	option	-
fortilink-neighbor-detect	Protocol for FortiGate neighbor discovery. lldp: Detect FortiLink neighbors using LLDP protocol. fortilink: Detect FortiLink neighbors using FortiLink protocol.	option	-
fortilink-split-interface	Enable/disable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy. enable: Enable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy. disable: Disable FortiLink split interface.	option	-
internal	Implicitly created.	integer	Minimum value: 0 Maximum value: 255
fortilink-backup-link	fortilink split interface backup link.	integer	Minimum value: 0 Maximum value: 255
switch-controller-access-vlan	Block FortiSwitch port-to-port traffic. enable: Block FortiSwitch port-to-port traffic on the VLAN, only permitting traffic to and from the FortiGate. disable: Allow normal VLAN traffic.	option	-
switch-controller-traffic-policy	Switch controller traffic policy for the VLAN.	string	Maximum length: 63
switch-controller-rspan-mode	Stop Layer2 MAC learning and interception of BPDUs and other packets on this interface. disable: Disable RSPAN passthrough mode on this VLAN interface. enable: Enable RSPAN passthrough mode on this VLAN interface.	option	-
switch-controller-igmp-snooping	Switch controller IGMP snooping. enable: Enable IGMP snooping. disable: Disable IGMP snooping.	option	-
switch-controller-igmp-snooping-proxy	Switch controller IGMP snooping proxy. enable: Enable IGMP snooping proxy. disable: Disable IGMP snooping proxy.	option	-
switch-controller-igmp-snooping-fast-leave	Switch controller IGMP snooping fast-leave. enable: Enable IGMP snooping fast-leave. disable: Disable IGMP snooping fast-leave.	option	-
switch-controller-dhcp-snooping	Switch controller DHCP snooping. enable: Enable DHCP snooping for FortiSwitch devices. disable: Disable DHCP snooping for FortiSwitch devices.	option	-
switch-controller-dhcp-snooping-verify-mac	Switch controller DHCP snooping verify MAC. enable: Enable DHCP snooping verify source MAC for FortiSwitch devices. disable: Disable DHCP snooping verify source MAC for FortiSwitch devices.	option	-
switch-controller-dhcp-snooping-option82	Switch controller DHCP snooping option82. enable: Enable DHCP snooping insert option82 for FortiSwitch devices. disable: Disable DHCP snooping insert option82 for FortiSwitch devices.	option	-
switch-controller-arp-inspection	Enable/disable FortiSwitch ARP inspection. enable: Enable ARP inspection for FortiSwitch devices. disable: Disable ARP inspection for FortiSwitch devices.	option	-
switch-controller-learning-limit	Limit the number of dynamic MAC addresses on this VLAN (1 - 128, 0 = no limit, default).	integer	Minimum value: 0 Maximum value: 128
color	Color of icon on the GUI.	integer	Minimum value: 0 Maximum value: 32
ingress-cos	Override incoming CoS in user VLAN tag on VLAN interface or assign a priority VLAN tag on physical interface. disable: Disable. cos0: CoS 0. cos1: CoS 1. cos2: CoS 2. cos3: CoS 3. cos4: CoS 4. cos5: CoS 5. cos6: CoS 6. cos7: CoS 7.	option	-
egress-cos	Override outgoing CoS in user VLAN tag. disable: Disable. cos0: CoS 0. cos1: CoS 1. cos2: CoS 2. cos3: CoS 3. cos4: CoS 4. cos5: CoS 5. cos6: CoS 6. cos7: CoS 7.	option	-

config vrrp

Parameter Name	Description	Type	Size
version	VRRP version. 2: VRRP version 2. 3: VRRP version 3.	option	-
vrgrp	VRRP group ID (1 - 65535).	integer	Minimum value: 1 Maximum value: 65535
vrip	IP address of the virtual router.	ipv4-address-any	Not Specified
priority	Priority of the virtual router (1 - 255).	integer	Minimum value: 1 Maximum value: 255
adv-interval	Advertisement interval (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
start-time	Startup time (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
preempt	Enable/disable preempt mode. enable: Enable preempt mode. disable: Disable preempt mode.	option	-
accept-mode	Enable/disable accept mode. enable: Enable accept mode. disable: Disable accept mode.	option	-
vrdst	Monitor the route to this destination.	ipv4-address-any	Not Specified
vrdst-priority	Priority of the virtual router when the virtual router destination becomes unreachable (0 - 254).	integer	Minimum value: 0 Maximum value: 254
ignore-default-route	Enable/disable ignoring of default route when checking destination. enable: Enable ignoring of default route when checking destination. disable: Disable ignoring of default route when checking destination.	option	-
status	Enable/disable this VRRP configuration. enable: Enable this VRRP configuration. disable: Disable this VRRP configuration.	option	-

config proxy-arp

Parameter Name	Description	Type	Size
ip	Set IP addresses of proxy ARP.	user	Not Specified

config secondaryip

Parameter Name	Description	Type	Size
ip	Secondary IP address of the interface.	ipv4-classnet-host	Not Specified
allowaccess	Management access settings for the secondary IP address. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access.	option	-
gwdetect	Enable/disable detect gateway alive for first. enable: Enable detect gateway alive for first. disable: Disable detect gateway alive for first.	option	-
ping-serv-status	PING server status.	integer	Minimum value: 0 Maximum value: 255
detectserver	Gateway's ping server for this IP.	user	Not Specified
detectprotocol	Protocols used to detect the server. ping: PING. tcp-echo: TCP echo. udp-echo: UDP echo.	option	-
ha-priority	HA election priority for the PING server.	integer	Minimum value: 1 Maximum value: 50

config tagging

Parameter Name	Description	Type	Size
category	Tag category.	string	Maximum length: 63
tags `<name>`	Tags. Tag name.	string	Maximum length: 79

config egress-queues

Parameter Name	Description	Type	Size
cos0	CoS profile name for CoS 0.	string	Maximum length: 35
cos1	CoS profile name for CoS 1.	string	Maximum length: 35
cos2	CoS profile name for CoS 2.	string	Maximum length: 35
cos3	CoS profile name for CoS 3.	string	Maximum length: 35
cos4	CoS profile name for CoS 4.	string	Maximum length: 35
cos5	CoS profile name for CoS 5.	string	Maximum length: 35
cos6	CoS profile name for CoS 6.	string	Maximum length: 35
cos7	CoS profile name for CoS 7.	string	Maximum length: 35

config ipv6

Parameter Name	Description	Type	Size
ip6-mode	Addressing mode (static, DHCP, delegated). static: Static setting. dhcp: DHCPv6 client mode. pppoe: IPv6 over PPPoE mode. delegated: IPv6 address with delegated prefix.	option	-
nd-mode	Neighbor discovery mode. basic: Do not support SEND. SEND-compatible: Support SEND.	option	-
nd-cert	Neighbor discovery certificate.	string	Maximum length: 35
nd-security-level	Neighbor discovery security level (0 - 7; 0 = least secure, default = 0).	integer	Minimum value: 0 Maximum value: 7
nd-timestamp-delta	Neighbor discovery timestamp delta value (1 - 3600 sec; default = 300).	integer	Minimum value: 1 Maximum value: 3600
nd-timestamp-fuzz	Neighbor discovery timestamp fuzz factor (1 - 60 sec; default = 1).	integer	Minimum value: 1 Maximum value: 60
nd-cga-modifier	Neighbor discovery CGA modifier.	user	Not Specified
ip6-dns-server-override	Enable/disable using the DNS server acquired by DHCP. enable: Enable using the DNS server acquired by DHCP. disable: Disable using the DNS server acquired by DHCP.	option	-
ip6-address	Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx	ipv6-prefix	Not Specified
ip6-allowaccess	Allow management access to the interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. fabric: Fabric access.	option	-
ip6-send-adv	Enable/disable sending advertisements about the interface. enable: Enable sending advertisements about this interface. disable: Disable sending advertisements about this interface.	option	-
ip6-manage-flag	Enable/disable the managed flag. enable: Enable the managed IPv6 flag. disable: Disable the managed IPv6 flag.	option	-
ip6-other-flag	Enable/disable the other IPv6 flag. enable: Enable the other IPv6 flag. disable: Disable the other IPv6 flag.	option	-
ip6-max-interval	IPv6 maximum interval (4 to 1800 sec).	integer	Minimum value: 4 Maximum value: 1800
ip6-min-interval	IPv6 minimum interval (3 to 1350 sec).	integer	Minimum value: 3 Maximum value: 1350
ip6-link-mtu	IPv6 link MTU.	integer	Minimum value: 1280 Maximum value: 16000
ip6-reachable-time	IPv6 reachable time (milliseconds; 0 means unspecified).	integer	Minimum value: 0 Maximum value: 3600000
ip6-retrans-time	IPv6 retransmit time (milliseconds; 0 means unspecified).	integer	Minimum value: 0 Maximum value: 4294967295
ip6-default-life	Default life (sec).	integer	Minimum value: 0 Maximum value: 9000
ip6-hop-limit	Hop limit (0 means unspecified).	integer	Minimum value: 0 Maximum value: 255
autoconf	Enable/disable address auto config. enable: Enable auto-configuration. disable: Disable auto-configuration.	option	-
ip6-upstream-interface	Interface name providing delegated information.	string	Maximum length: 15
ip6-subnet	Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx	ipv6-prefix	Not Specified
dhcp6-relay-service	Enable/disable DHCPv6 relay. disable: Disable DHCPv6 relay enable: Enable DHCPv6 relay.	option	-
dhcp6-relay-type	DHCPv6 relay type. regular: Regular DHCP relay.	option	-
dhcp6-relay-ip	DHCPv6 relay IP address.	user	Not Specified
dhcp6-client-options	DHCPv6 client options. rapid: Send rapid commit option. iapd: Send including IA-PD option. iana: Send including IA-NA option.	option	-
dhcp6-prefix-delegation	Enable/disable DHCPv6 prefix delegation. enable: Enable DHCPv6 prefix delegation. disable: Disable DHCPv6 prefix delegation.	option	-
dhcp6-information-request	Enable/disable DHCPv6 information request. enable: Enable DHCPv6 information request. disable: Disable DHCPv6 information request.	option	-
dhcp6-prefix-hint	DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server.	ipv6-network	Not Specified
dhcp6-prefix-hint-plt	DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time.	integer	Minimum value: 0 Maximum value: 4294967295
dhcp6-prefix-hint-vlt	DHCPv6 prefix hint valid life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
vrrp-virtual-mac6	Enable/disable virtual MAC for VRRP. enable: Enable virtual MAC for VRRP. disable: Disable virtual MAC for VRRP.	option	-
vrip6_link_local	Link-local IPv6 address of virtual router.	ipv6-address	Not Specified

config ip6-prefix-list

Parameter Name	Description	Type	Size
autonomous-flag	Enable/disable the autonomous flag. enable: Enable the autonomous flag. disable: Disable the autonomous flag.	option	-
onlink-flag	Enable/disable the onlink flag. enable: Enable the onlink flag. disable: Disable the onlink flag.	option	-
valid-life-time	Valid life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
preferred-life-time	Preferred life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
rdnss	Recursive DNS server option.	user	Not Specified
dnssl `<domain>`	DNS search list option. Domain name.	string	Maximum length: 79

config ip6-delegated-prefix-list

Parameter Name	Description	Type	Size
upstream-interface	Name of the interface that provides delegated information.	string	Maximum length: 15
autonomous-flag	Enable/disable the autonomous flag. enable: Enable the autonomous flag. disable: Disable the autonomous flag.	option	-
onlink-flag	Enable/disable the onlink flag. enable: Enable the onlink flag. disable: Disable the onlink flag.	option	-
subnet	Add subnet ID to routing prefix.	ipv6-network	Not Specified
rdnss-service	Recursive DNS service option. delegated: Delegated RDNSS settings. default: System RDNSS settings. specify: Specify recursive DNS servers.	option	-
rdnss	Recursive DNS server option.	user	Not Specified

config vrrp6

Parameter Name	Description	Type	Size
vrgrp	VRRP group ID (1 - 65535).	integer	Minimum value: 1 Maximum value: 65535
vrip6	IPv6 address of the virtual router.	ipv6-address	Not Specified
priority	Priority of the virtual router (1 - 255).	integer	Minimum value: 1 Maximum value: 255
adv-interval	Advertisement interval (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
start-time	Startup time (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
preempt	Enable/disable preempt mode. enable: Enable preempt mode. disable: Disable preempt mode.	option	-
accept-mode	Enable/disable accept mode. enable: Enable accept mode. disable: Disable accept mode.	option	-
vrdst6	Monitor the route to this destination.	ipv6-address	Not Specified
status	Enable/disable VRRP. enable: Enable VRRP. disable: Disable VRRP.	option	-

Configure interfaces.

  config system interface
      Description: Configure interfaces.
      edit <name>
          set vdom {string}
          set vrf {integer}
          set cli-conn-status {integer}
          set fortilink [enable|disable]
          set mode [static|dhcp|...]
          set distance {integer}
          set priority {integer}
          set dhcp-relay-interface-select-method [auto|sdwan|...]
          set dhcp-relay-interface {string}
          set dhcp-relay-service [disable|enable]
          set dhcp-relay-ip {user}
          set dhcp-relay-type [regular|ipsec]
          set dhcp-relay-agent-option [enable|disable]
          set management-ip {ipv4-classnet-host}
          set ip {ipv4-classnet-host}
          set allowaccess {option1}, {option2}, ...
          set gwdetect [enable|disable]
          set ping-serv-status {integer}
          set detectserver {user}
          set detectprotocol {option1}, {option2}, ...
          set ha-priority {integer}
          set fail-detect [enable|disable]
          set fail-detect-option {option1}, {option2}, ...
          set fail-alert-method [link-failed-signal|link-down]
          set fail-action-on-extender [soft-restart|hard-restart|...]
          set fail-alert-interfaces <name1>, <name2>, ...
          set dhcp-client-identifier {string}
          set dhcp-renew-time {integer}
          set ipunnumbered {ipv4-address}
          set username {string}
          set pppoe-unnumbered-negotiate [enable|disable]
          set password {password}
          set idle-timeout {integer}
          set detected-peer-mtu {integer}
          set disc-retry-timeout {integer}
          set padt-retry-timeout {integer}
          set service-name {string}
          set ac-name {string}
          set lcp-echo-interval {integer}
          set lcp-max-echo-fails {integer}
          set defaultgw [enable|disable]
          set dns-server-override [enable|disable]
          set auth-type [auto|pap|...]
          set pptp-client [enable|disable]
          set pptp-user {string}
          set pptp-password {password}
          set pptp-server-ip {ipv4-address}
          set pptp-auth-type [auto|pap|...]
          set pptp-timeout {integer}
          set arpforward [enable|disable]
          set ndiscforward [enable|disable]
          set broadcast-forward [enable|disable]
          set bfd [global|enable|...]
          set bfd-desired-min-tx {integer}
          set bfd-detect-mult {integer}
          set bfd-required-min-rx {integer}
          set l2forward [enable|disable]
          set icmp-send-redirect [enable|disable]
          set icmp-accept-redirect [enable|disable]
          set vlanforward [enable|disable]
          set stpforward [enable|disable]
          set stpforward-mode [rpl-all-ext-id|rpl-bridge-ext-id|...]
          set ips-sniffer-mode [enable|disable]
          set ident-accept [enable|disable]
          set ipmac [enable|disable]
          set subst [enable|disable]
          set macaddr {mac-address}
          set substitute-dst-mac {mac-address}
          set speed [auto|10full|...]
          set status [up|down]
          set netbios-forward [disable|enable]
          set wins-ip {ipv4-address}
          set type [physical|vlan|...]
          set dedicated-to [none|management]
          set trust-ip-1 {ipv4-classnet-any}
          set trust-ip-2 {ipv4-classnet-any}
          set trust-ip-3 {ipv4-classnet-any}
          set trust-ip6-1 {ipv6-prefix}
          set trust-ip6-2 {ipv6-prefix}
          set trust-ip6-3 {ipv6-prefix}
          set mtu-override [enable|disable]
          set mtu {integer}
          set wccp [enable|disable]
          set netflow-sampler [disable|tx|...]
          set sflow-sampler [enable|disable]
          set drop-overlapped-fragment [enable|disable]
          set drop-fragment [enable|disable]
          set src-check [enable|disable]
          set sample-rate {integer}
          set polling-interval {integer}
          set sample-direction [tx|rx|...]
          set explicit-web-proxy [enable|disable]
          set explicit-ftp-proxy [enable|disable]
          set proxy-captive-portal [enable|disable]
          set tcp-mss {integer}
          set inbandwidth {integer}
          set outbandwidth {integer}
          set egress-shaping-profile {string}
          set ingress-shaping-profile {string}
          set disconnect-threshold {integer}
          set spillover-threshold {integer}
          set ingress-spillover-threshold {integer}
          set weight {integer}
          set interface {string}
          set external [enable|disable]
          set vlanid {integer}
          set forward-domain {integer}
          set remote-ip {ipv4-classnet-host}
          set member <interface-name1>, <interface-name2>, ...
          set lacp-mode [static|passive|...]
          set lacp-ha-slave [enable|disable]
          set lacp-speed [slow|fast]
          set min-links {integer}
          set min-links-down [operational|administrative]
          set algorithm [L2|L3|...]
          set link-up-delay {integer}
          set priority-override [enable|disable]
          set aggregate {string}
          set redundant-interface {string}
          set devindex {integer}
          set vindex {integer}
          set switch {string}
          set description {var-string}
          set alias {string}
          set security-mode [none|captive-portal|...]
          set security-mac-auth-bypass [mac-auth-only|enable|...]
          set security-external-web {string}
          set security-external-logout {string}
          set replacemsg-override-group {string}
          set security-redirect-url {string}
          set security-exempt-list {string}
          set security-groups <name1>, <name2>, ...
          set device-identification [enable|disable]
          set device-user-identification [enable|disable]
          set lldp-reception [enable|disable|...]
          set lldp-transmission [enable|disable|...]
          set lldp-network-policy {string}
          set broadcast-forticlient-discovery [enable|disable]
          set estimated-upstream-bandwidth {integer}
          set estimated-downstream-bandwidth {integer}
          set vrrp-virtual-mac [enable|disable]
          config vrrp
              Description: VRRP configuration.
              edit <vrid>
                  set version [2|3]
                  set vrgrp {integer}
                  set vrip {ipv4-address-any}
                  set priority {integer}
                  set adv-interval {integer}
                  set start-time {integer}
                  set preempt [enable|disable]
                  set accept-mode [enable|disable]
                  set vrdst {ipv4-address-any}
                  set vrdst-priority {integer}
                  set ignore-default-route [enable|disable]
                  set status [enable|disable]
                  config proxy-arp
                      Description: VRRP Proxy ARP configuration.
                      edit <id>
                          set ip {user}
                      next
                  end
              next
          end
          set role [lan|wan|...]
          set snmp-index {integer}
          set secondary-IP [enable|disable]
          config secondaryip
              Description: Second IP address of interface.
              edit <id>
                  set ip {ipv4-classnet-host}
                  set allowaccess {option1}, {option2}, ...
                  set gwdetect [enable|disable]
                  set ping-serv-status {integer}
                  set detectserver {user}
                  set detectprotocol {option1}, {option2}, ...
                  set ha-priority {integer}
              next
          end
          set preserve-session-route [enable|disable]
          set auto-auth-extension-device [enable|disable]
          set ap-discover [enable|disable]
          set fortilink-stacking [enable|disable]
          set fortilink-neighbor-detect [lldp|fortilink]
          set fortilink-split-interface [enable|disable]
          set internal {integer}
          set fortilink-backup-link {integer}
          set switch-controller-access-vlan [enable|disable]
          set switch-controller-traffic-policy {string}
          set switch-controller-rspan-mode [disable|enable]
          set switch-controller-igmp-snooping [enable|disable]
          set switch-controller-igmp-snooping-proxy [enable|disable]
          set switch-controller-igmp-snooping-fast-leave [enable|disable]
          set switch-controller-dhcp-snooping [enable|disable]
          set switch-controller-dhcp-snooping-verify-mac [enable|disable]
          set switch-controller-dhcp-snooping-option82 [enable|disable]
          set switch-controller-arp-inspection [enable|disable]
          set switch-controller-learning-limit {integer}
          set color {integer}
          config tagging
              Description: Config object tagging.
              edit <name>
                  set category {string}
                  set tags <name1>, <name2>, ...
              next
          end
          config egress-queues
              Description: Configure queues of NP port on egress path.
              set cos0 {string}
              set cos1 {string}
              set cos2 {string}
              set cos3 {string}
              set cos4 {string}
              set cos5 {string}
              set cos6 {string}
              set cos7 {string}
          end
          set ingress-cos [disable|cos0|...]
          set egress-cos [disable|cos0|...]
          config ipv6
              Description: IPv6 of interface.
              set ip6-mode [static|dhcp|...]
              set nd-mode [basic|SEND-compatible]
              set nd-cert {string}
              set nd-security-level {integer}
              set nd-timestamp-delta {integer}
              set nd-timestamp-fuzz {integer}
              set nd-cga-modifier {user}
              set ip6-dns-server-override [enable|disable]
              set ip6-address {ipv6-prefix}
              config ip6-extra-addr
                  Description: Extra IPv6 address prefixes of interface.
                  edit <prefix>

                  next
              end
              set ip6-allowaccess {option1}, {option2}, ...
              set ip6-send-adv [enable|disable]
              set ip6-manage-flag [enable|disable]
              set ip6-other-flag [enable|disable]
              set ip6-max-interval {integer}
              set ip6-min-interval {integer}
              set ip6-link-mtu {integer}
              set ip6-reachable-time {integer}
              set ip6-retrans-time {integer}
              set ip6-default-life {integer}
              set ip6-hop-limit {integer}
              set autoconf [enable|disable]
              set ip6-upstream-interface {string}
              set ip6-subnet {ipv6-prefix}
              config ip6-prefix-list
                  Description: Advertised prefix list.
                  edit <prefix>
                      set autonomous-flag [enable|disable]
                      set onlink-flag [enable|disable]
                      set valid-life-time {integer}
                      set preferred-life-time {integer}
                      set rdnss {user}
                      set dnssl <domain1>, <domain2>, ...
                  next
              end
              config ip6-delegated-prefix-list
                  Description: Advertised IPv6 delegated prefix list.
                  edit <prefix-id>
                      set upstream-interface {string}
                      set autonomous-flag [enable|disable]
                      set onlink-flag [enable|disable]
                      set subnet {ipv6-network}
                      set rdnss-service [delegated|default|...]
                      set rdnss {user}
                  next
              end
              set dhcp6-relay-service [disable|enable]
              set dhcp6-relay-type {option}
              set dhcp6-relay-ip {user}
              set dhcp6-client-options {option1}, {option2}, ...
              set dhcp6-prefix-delegation [enable|disable]
              set dhcp6-information-request [enable|disable]
              set dhcp6-prefix-hint {ipv6-network}
              set dhcp6-prefix-hint-plt {integer}
              set dhcp6-prefix-hint-vlt {integer}
              set vrrp-virtual-mac6 [enable|disable]
              set vrip6_link_local {ipv6-address}
              config vrrp6
                  Description: IPv6 VRRP configuration.
                  edit <vrid>
                      set vrgrp {integer}
                      set vrip6 {ipv6-address}
                      set priority {integer}
                      set adv-interval {integer}
                      set start-time {integer}
                      set preempt [enable|disable]
                      set accept-mode [enable|disable]
                      set vrdst6 {ipv6-address}
                      set status [enable|disable]
                  next
              end
          end
      next
  end

config system interface

Parameter Name	Description	Type	Size
vdom	Interface is in this virtual domain (VDOM).	string	Maximum length: 31
vrf	Virtual Routing Forwarding ID.	integer	Minimum value: 0 Maximum value: 31
cli-conn-status	CLI connection status.	integer	Minimum value: 0 Maximum value: 4294967295
fortilink	Enable FortiLink to dedicate this interface to manage other Fortinet devices. enable: Enable FortiLink to dedicated interface for managing FortiSwitch devices. disable: Disable FortiLink to dedicated interface for managing FortiSwitch devices.	option	-
mode	Addressing mode (static, DHCP, PPPoE). static: Static setting. dhcp: External DHCP client mode. pppoe: External PPPoE mode.	option	-
distance	Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.	integer	Minimum value: 1 Maximum value: 255
priority	Priority of learned routes.	integer	Minimum value: 0 Maximum value: 4294967295
dhcp-relay-interface-select-method	Specify how to select outgoing interface to reach server. auto: Set outgoing interface automatically. sdwan: Set outgoing interface by SD-WAN or policy routing rules. specify: Set outgoing interface manually.	option	-
dhcp-relay-interface	Specify outgoing interface to reach server.	string	Maximum length: 15
dhcp-relay-service	Enable/disable allowing this interface to act as a DHCP relay. disable: None. enable: DHCP relay agent.	option	-
dhcp-relay-ip	DHCP relay IP address.	user	Not Specified
dhcp-relay-type	DHCP relay type (regular or IPsec). regular: Regular DHCP relay. ipsec: DHCP relay for IPsec.	option	-
dhcp-relay-agent-option	Enable/disable DHCP relay agent option. enable: Enable DHCP relay agent option. disable: Disable DHCP relay agent option.	option	-
management-ip	High Availability in-band management IP address of this interface.	ipv4-classnet-host	Not Specified
ip	Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.	ipv4-classnet-host	Not Specified
allowaccess	Permitted types of management access to this interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access.	option	-
gwdetect	Enable/disable detect gateway alive for first. enable: Enable detect gateway alive for first. disable: Disable detect gateway alive for first.	option	-
ping-serv-status	PING server status.	integer	Minimum value: 0 Maximum value: 255
detectserver	Gateway's ping server for this IP.	user	Not Specified
detectprotocol	Protocols used to detect the server. ping: PING. tcp-echo: TCP echo. udp-echo: UDP echo.	option	-
ha-priority	HA election priority for the PING server.	integer	Minimum value: 1 Maximum value: 50
fail-detect	Enable/disable fail detection features for this interface. enable: Enable interface failed option status. disable: Disable interface failed option status.	option	-
fail-detect-option	Options for detecting that this interface has failed. detectserver: Use a ping server to determine if the interface has failed. link-down: Use port detection to determine if the interface has failed.	option	-
fail-alert-method	Select link-failed-signal or link-down method to alert about a failed link. link-failed-signal: Link-failed-signal. link-down: Link-down.	option	-
fail-action-on-extender	Action on extender when interface fail . soft-restart: Soft-restart-on-extender. hard-restart: Hard-restart-on-extender. reboot: Reboot-on-extender.	option	-
fail-alert-interfaces `<name>`	Names of the FortiGate interfaces to which the link failure alert is sent. Names of the non-virtual interface.	string	Maximum length: 79
dhcp-client-identifier	DHCP client identifier.	string	Maximum length: 48
dhcp-renew-time	DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.	integer	Minimum value: 300 Maximum value: 604800
ipunnumbered	Unnumbered IP used for PPPoE interfaces for which no unique local address is provided.	ipv4-address	Not Specified
username	Username of the PPPoE account, provided by your ISP.	string	Maximum length: 64
pppoe-unnumbered-negotiate	Enable/disable PPPoE unnumbered negotiation. enable: Enable IP address negotiating for unnumbered. disable: Disable IP address negotiating for unnumbered.	option	-
password	PPPoE account's password.	password	Not Specified
idle-timeout	PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.	integer	Minimum value: 0 Maximum value: 32767
detected-peer-mtu	MTU of detected peer (0 - 4294967295).	integer	Minimum value: 0 Maximum value: 4294967295
disc-retry-timeout	Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.	integer	Minimum value: 0 Maximum value: 4294967295
padt-retry-timeout	PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.	integer	Minimum value: 0 Maximum value: 4294967295
service-name	PPPoE service name.	string	Maximum length: 63
ac-name	PPPoE server name.	string	Maximum length: 63
lcp-echo-interval	Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.	integer	Minimum value: 0 Maximum value: 32767
lcp-max-echo-fails	Maximum missed LCP echo messages before disconnect.	integer	Minimum value: 0 Maximum value: 32767
defaultgw	Enable to get the gateway IP from the DHCP or PPPoE server. enable: Enable default gateway. disable: Disable default gateway.	option	-
dns-server-override	Enable/disable use DNS acquired by DHCP or PPPoE. enable: Use DNS acquired by DHCP or PPPoE. disable: No not use DNS acquired by DHCP or PPPoE.	option	-
auth-type	PPP authentication type to use. auto: Automatically choose authentication. pap: PAP authentication. chap: CHAP authentication. mschapv1: MS-CHAPv1 authentication. mschapv2: MS-CHAPv2 authentication.	option	-
pptp-client	Enable/disable PPTP client. enable: Enable PPTP client. disable: Disable PPTP client.	option	-
pptp-user	PPTP user name.	string	Maximum length: 64
pptp-password	PPTP password.	password	Not Specified
pptp-server-ip	PPTP server IP address.	ipv4-address	Not Specified
pptp-auth-type	PPTP authentication type. auto: Automatically choose authentication. pap: PAP authentication. chap: CHAP authentication. mschapv1: MS-CHAPv1 authentication. mschapv2: MS-CHAPv2 authentication.	option	-
pptp-timeout	Idle timer in minutes (0 for disabled).	integer	Minimum value: 0 Maximum value: 65535
arpforward	Enable/disable ARP forwarding. enable: Enable ARP forwarding. disable: Disable ARP forwarding.	option	-
ndiscforward	Enable/disable NDISC forwarding. enable: Enable NDISC forwarding. disable: Disable NDISC forwarding.	option	-
broadcast-forward	Enable/disable broadcast forwarding. enable: Enable broadcast forwarding. disable: Disable broadcast forwarding.	option	-
bfd	Bidirectional Forwarding Detection (BFD) settings. global: BFD behavior of this interface will be based on global configuration. enable: Enable BFD on this interface and ignore global configuration. disable: Disable BFD on this interface and ignore global configuration.	option	-
bfd-desired-min-tx	BFD desired minimal transmit interval.	integer	Minimum value: 1 Maximum value: 100000
bfd-detect-mult	BFD detection multiplier.	integer	Minimum value: 1 Maximum value: 50
bfd-required-min-rx	BFD required minimal receive interval.	integer	Minimum value: 1 Maximum value: 100000
l2forward	Enable/disable l2 forwarding. enable: Enable L2 forwarding. disable: Disable L2 forwarding.	option	-
icmp-send-redirect	Enable/disable ICMP send redirect. enable: Enable ICMP send redirect. disable: Disable ICMP send redirect.	option	-
icmp-accept-redirect	Enable/disable ICMP accept redirect. enable: Enable ICMP accept redirect. disable: Disable ICMP accept redirect.	option	-
vlanforward	Enable/disable traffic forwarding between VLANs on this interface. enable: Enable traffic forwarding. disable: Disable traffic forwarding.	option	-
stpforward	Enable/disable STP forwarding. enable: Enable STP forwarding. disable: Disable STP forwarding.	option	-
stpforward-mode	Configure STP forwarding mode. rpl-all-ext-id: Replace all extension IDs (root, bridge). rpl-bridge-ext-id: Replace the bridge extension ID only. rpl-nothing: Replace nothing.	option	-
ips-sniffer-mode	Enable/disable the use of this interface as a one-armed sniffer. enable: Enable IPS sniffer mode. disable: Disable IPS sniffer mode.	option	-
ident-accept	Enable/disable authentication for this interface. enable: Enable determining a user's identity from packet identification. disable: Disable determining a user's identity from packet identification.	option	-
ipmac	Enable/disable IP/MAC binding. enable: Enable IP/MAC binding. disable: Disable IP/MAC binding.	option	-
subst	Enable to always send packets from this interface to a destination MAC address. enable: Send packets from this interface. disable: Do not send packets from this interface.	option	-
macaddr	Change the interface's MAC address.	mac-address	Not Specified
substitute-dst-mac	Destination MAC address that all packets are sent to from this interface.	mac-address	Not Specified
speed	Interface speed. The default setting and the options available depend on the interface hardware. auto: Automatically adjust speed. 10full: 10M full-duplex. 10half: 10M half-duplex. 100full: 100M full-duplex. 100half: 100M half-duplex. 1000full: 1000M full-duplex. 1000half: 1000M half-duplex. 1000auto: 1000M auto adjust. 10000full: 10G full-duplex.	option	-
status	Bring the interface up or shut the interface down. up: Bring the interface up. down: Shut the interface down.	option	-
netbios-forward	Enable/disable NETBIOS forwarding. disable: Disable NETBIOS forwarding. enable: Enable NETBIOS forwarding.	option	-
wins-ip	WINS server IP.	ipv4-address	Not Specified
type	Interface type. physical: Physical interface. vlan: VLAN interface. aggregate: Aggregate interface. redundant: Redundant interface. tunnel: Tunnel interface. vdom-link: VDOM link interface. loopback: Loopback interface. switch: Software switch interface. vap-switch: VAP interface. wl-mesh: WLAN mesh interface. fext-wan: FortiExtender interface. vxlan: VXLAN interface. geneve: GENEVE interface. hdlc: T1/E1 interface. switch-vlan: Switch VLAN interface. emac-vlan: EMAC VLAN interface.	option	-
dedicated-to	Configure interface for single purpose. none: Interface not dedicated for any purpose. management: Dedicate this interface for management purposes only.	option	-
trust-ip-1	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip-2	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip-3	Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).	ipv4-classnet-any	Not Specified
trust-ip6-1	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
trust-ip6-2	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
trust-ip6-3	Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).	ipv6-prefix	Not Specified
mtu-override	Enable to set a custom MTU for this interface. enable: Override default MTU. disable: Use default MTU (1500).	option	-
mtu	MTU value for this interface.	integer	Minimum value: 0 Maximum value: 4294967295
wccp	Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers. enable: Enable WCCP protocol on this interface. disable: Disable WCCP protocol on this interface.	option	-
netflow-sampler	Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both). disable: Disable NetFlow protocol on this interface. tx: Monitor transmitted traffic on this interface. rx: Monitor received traffic on this interface. both: Monitor transmitted/received traffic on this interface.	option	-
sflow-sampler	Enable/disable sFlow on this interface. enable: Enable sFlow protocol on this interface. disable: Disable sFlow protocol on this interface.	option	-
drop-overlapped-fragment	Enable/disable drop overlapped fragment packets. enable: Enable drop of overlapped fragment packets. disable: Disable drop of overlapped fragment packets.	option	-
drop-fragment	Enable/disable drop fragment packets. enable: Enable/disable drop fragment packets. disable: Do not drop fragment packets.	option	-
src-check	Enable/disable source IP check. enable: Enable source IP check. disable: Disable source IP check.	option	-
sample-rate	sFlow sample rate (10 - 99999).	integer	Minimum value: 10 Maximum value: 99999
polling-interval	sFlow polling interval (1 - 255 sec).	integer	Minimum value: 1 Maximum value: 255
sample-direction	Data that NetFlow collects (rx, tx, or both). tx: Monitor transmitted traffic on this interface. rx: Monitor received traffic on this interface. both: Monitor transmitted/received traffic on this interface.	option	-
explicit-web-proxy	Enable/disable the explicit web proxy on this interface. enable: Enable explicit Web proxy on this interface. disable: Disable explicit Web proxy on this interface.	option	-
explicit-ftp-proxy	Enable/disable the explicit FTP proxy on this interface. enable: Enable explicit FTP proxy on this interface. disable: Disable explicit FTP proxy on this interface.	option	-
proxy-captive-portal	Enable/disable proxy captive portal on this interface. enable: Enable proxy captive portal on this interface. disable: Disable proxy captive portal on this interface.	option	-
tcp-mss	TCP maximum segment size. 0 means do not change segment size.	integer	Minimum value: 0 Maximum value: 4294967295
inbandwidth	Bandwidth limit for incoming traffic (0 - 16776000 kbps), 0 means unlimited.	integer	Minimum value: 0 Maximum value: 16776000
outbandwidth	Bandwidth limit for outgoing traffic (0 - 16776000 kbps).	integer	Minimum value: 0 Maximum value: 16776000
egress-shaping-profile	Outgoing traffic shaping profile.	string	Maximum length: 35
ingress-shaping-profile	Incoming traffic shaping profile.	string	Maximum length: 35
disconnect-threshold	Time in milliseconds to wait before sending a notification that this interface is down or disconnected.	integer	Minimum value: 0 Maximum value: 10000
spillover-threshold	Egress Spillover threshold (0 - 16776000 kbps), 0 means unlimited.	integer	Minimum value: 0 Maximum value: 16776000
ingress-spillover-threshold	Ingress Spillover threshold (0 - 16776000 kbps).	integer	Minimum value: 0 Maximum value: 16776000
weight	Default weight for static routes (if route has no weight configured).	integer	Minimum value: 0 Maximum value: 255
interface	Interface name.	string	Maximum length: 15
external	Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet). enable: Enable identifying the interface as an external interface. disable: Disable identifying the interface as an external interface.	option	-
vlanid	VLAN ID (1 - 4094).	integer	Minimum value: 1 Maximum value: 4094
forward-domain	Transparent mode forward domain.	integer	Minimum value: 0 Maximum value: 2147483647
remote-ip	Remote IP address of tunnel.	ipv4-classnet-host	Not Specified
member `<interface-name>`	Physical interfaces that belong to the aggregate or redundant interface. Physical interface name.	string	Maximum length: 79
lacp-mode	LACP mode. static: Use static aggregation, do not send and ignore any LACP messages. passive: Passively use LACP to negotiate 802.3ad aggregation. active: Actively use LACP to negotiate 802.3ad aggregation.	option	-
lacp-ha-slave	LACP HA slave. enable: Allow HA slave to send/receive LACP messages. disable: Block HA slave from sending/receiving LACP messages.	option	-
lacp-speed	How often the interface sends LACP messages. slow: Send LACP message every 30 seconds. fast: Send LACP message every second.	option	-
min-links	Minimum number of aggregated ports that must be up.	integer	Minimum value: 1 Maximum value: 32
min-links-down	Action to take when less than the configured minimum number of links are active. operational: Set the aggregate operationally down. administrative: Set the aggregate administratively down.	option	-
algorithm	Frame distribution algorithm. L2: Use layer 2 address for distribution. L3: Use layer 3 address for distribution. L4: Use layer 4 information for distribution.	option	-
link-up-delay	Number of milliseconds to wait before considering a link is up.	integer	Minimum value: 50 Maximum value: 3600000
priority-override	Enable/disable fail back to higher priority port once recovered. enable: Enable fail back to higher priority port once recovered. disable: Disable fail back to higher priority port once recovered.	option	-
aggregate	Aggregate interface.	string	Maximum length: 15
redundant-interface	Redundant interface.	string	Maximum length: 15
devindex	Device Index.	integer	Minimum value: 0 Maximum value: 4294967295
vindex	Switch control interface VLAN ID.	integer	Minimum value: 0 Maximum value: 65535
switch	Contained in switch.	string	Maximum length: 15
description	Description.	var-string	Maximum length: 255
alias	Alias will be displayed with the interface name to make it easier to distinguish.	string	Maximum length: 25
security-mode	Turn on captive portal authentication for this interface. none: No security option. captive-portal: Captive portal authentication. 802.1X: 802.1X port-based authentication.	option	-
security-mac-auth-bypass	Enable/disable MAC authentication bypass. mac-auth-only: Enable MAC authentication bypass without EAP. enable: Enable MAC authentication bypass. disable: Disable MAC authentication bypass.	option	-
security-external-web	URL of external authentication web server.	string	Maximum length: 127
security-external-logout	URL of external authentication logout server.	string	Maximum length: 127
replacemsg-override-group	Replacement message override group.	string	Maximum length: 35
security-redirect-url	URL redirection after disclaimer/authentication.	string	Maximum length: 127
security-exempt-list	Name of security-exempt-list.	string	Maximum length: 35
security-groups `<name>`	User groups that can authenticate with the captive portal. Names of user groups that can authenticate with the captive portal.	string	Maximum length: 79
device-identification	Enable/disable passively gathering of device identity information about the devices on the network connected to this interface. enable: Enable passive gathering of identity information about hosts. disable: Disable passive gathering of identity information about hosts.	option	-
device-user-identification	Enable/disable passive gathering of user identity information about users on this interface. enable: Enable passive gathering of user identity information about users. disable: Disable passive gathering of user identity information about users.	option	-
lldp-reception	Enable/disable Link Layer Discovery Protocol (LLDP) reception. enable: Enable reception of Link Layer Discovery Protocol (LLDP). disable: Disable reception of Link Layer Discovery Protocol (LLDP). vdom: Use VDOM Link Layer Discovery Protocol (LLDP) reception configuration setting.	option	-
lldp-transmission	Enable/disable Link Layer Discovery Protocol (LLDP) transmission. enable: Enable transmission of Link Layer Discovery Protocol (LLDP). disable: Disable transmission of Link Layer Discovery Protocol (LLDP). vdom: Use VDOM Link Layer Discovery Protocol (LLDP) transmission configuration setting.	option	-
lldp-network-policy	LLDP-MED network policy profile.	string	Maximum length: 35
broadcast-forticlient-discovery	Enable/disable broadcasting FortiClient discovery messages. enable: Enable broadcasting FortiClient discovery messages. disable: Disable broadcasting FortiClient discovery messages.	option	-
estimated-upstream-bandwidth	Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.	integer	Minimum value: 0 Maximum value: 4294967295
estimated-downstream-bandwidth	Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.	integer	Minimum value: 0 Maximum value: 4294967295
vrrp-virtual-mac	Enable/disable use of virtual MAC for VRRP. enable: Enable use of virtual MAC for VRRP. disable: Disable use of virtual MAC for VRRP.	option	-
role	Interface role. lan: Connected to local network of endpoints. wan: Connected to Internet. dmz: Connected to server zone. undefined: Interface has no specific role.	option	-
snmp-index	Permanent SNMP Index of the interface.	integer	Minimum value: 0 Maximum value: 4294967295
secondary-IP	Enable/disable adding a secondary IP to this interface. enable: Enable secondary IP. disable: Disable secondary IP.	option	-
preserve-session-route	Enable/disable preservation of session route when dirty. enable: Enable preservation of session route when dirty. disable: Disable preservation of session route when dirty.	option	-
auto-auth-extension-device	Enable/disable automatic authorization of dedicated Fortinet extension device on this interface. enable: Enable automatic authorization of dedicated Fortinet extension device on this interface. disable: Disable automatic authorization of dedicated Fortinet extension device on this interface.	option	-
ap-discover	Enable/disable automatic registration of unknown FortiAP devices. enable: Enable automatic registration of unknown FortiAP devices. disable: Disable automatic registration of unknown FortiAP devices.	option	-
fortilink-stacking	Enable/disable FortiLink switch-stacking on this interface. enable: Enable FortiLink switch stacking. disable: Disable FortiLink switch stacking.	option	-
fortilink-neighbor-detect	Protocol for FortiGate neighbor discovery. lldp: Detect FortiLink neighbors using LLDP protocol. fortilink: Detect FortiLink neighbors using FortiLink protocol.	option	-
fortilink-split-interface	Enable/disable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy. enable: Enable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy. disable: Disable FortiLink split interface.	option	-
internal	Implicitly created.	integer	Minimum value: 0 Maximum value: 255
fortilink-backup-link	fortilink split interface backup link.	integer	Minimum value: 0 Maximum value: 255
switch-controller-access-vlan	Block FortiSwitch port-to-port traffic. enable: Block FortiSwitch port-to-port traffic on the VLAN, only permitting traffic to and from the FortiGate. disable: Allow normal VLAN traffic.	option	-
switch-controller-traffic-policy	Switch controller traffic policy for the VLAN.	string	Maximum length: 63
switch-controller-rspan-mode	Stop Layer2 MAC learning and interception of BPDUs and other packets on this interface. disable: Disable RSPAN passthrough mode on this VLAN interface. enable: Enable RSPAN passthrough mode on this VLAN interface.	option	-
switch-controller-igmp-snooping	Switch controller IGMP snooping. enable: Enable IGMP snooping. disable: Disable IGMP snooping.	option	-
switch-controller-igmp-snooping-proxy	Switch controller IGMP snooping proxy. enable: Enable IGMP snooping proxy. disable: Disable IGMP snooping proxy.	option	-
switch-controller-igmp-snooping-fast-leave	Switch controller IGMP snooping fast-leave. enable: Enable IGMP snooping fast-leave. disable: Disable IGMP snooping fast-leave.	option	-
switch-controller-dhcp-snooping	Switch controller DHCP snooping. enable: Enable DHCP snooping for FortiSwitch devices. disable: Disable DHCP snooping for FortiSwitch devices.	option	-
switch-controller-dhcp-snooping-verify-mac	Switch controller DHCP snooping verify MAC. enable: Enable DHCP snooping verify source MAC for FortiSwitch devices. disable: Disable DHCP snooping verify source MAC for FortiSwitch devices.	option	-
switch-controller-dhcp-snooping-option82	Switch controller DHCP snooping option82. enable: Enable DHCP snooping insert option82 for FortiSwitch devices. disable: Disable DHCP snooping insert option82 for FortiSwitch devices.	option	-
switch-controller-arp-inspection	Enable/disable FortiSwitch ARP inspection. enable: Enable ARP inspection for FortiSwitch devices. disable: Disable ARP inspection for FortiSwitch devices.	option	-
switch-controller-learning-limit	Limit the number of dynamic MAC addresses on this VLAN (1 - 128, 0 = no limit, default).	integer	Minimum value: 0 Maximum value: 128
color	Color of icon on the GUI.	integer	Minimum value: 0 Maximum value: 32
ingress-cos	Override incoming CoS in user VLAN tag on VLAN interface or assign a priority VLAN tag on physical interface. disable: Disable. cos0: CoS 0. cos1: CoS 1. cos2: CoS 2. cos3: CoS 3. cos4: CoS 4. cos5: CoS 5. cos6: CoS 6. cos7: CoS 7.	option	-
egress-cos	Override outgoing CoS in user VLAN tag. disable: Disable. cos0: CoS 0. cos1: CoS 1. cos2: CoS 2. cos3: CoS 3. cos4: CoS 4. cos5: CoS 5. cos6: CoS 6. cos7: CoS 7.	option	-

config vrrp

Parameter Name	Description	Type	Size
version	VRRP version. 2: VRRP version 2. 3: VRRP version 3.	option	-
vrgrp	VRRP group ID (1 - 65535).	integer	Minimum value: 1 Maximum value: 65535
vrip	IP address of the virtual router.	ipv4-address-any	Not Specified
priority	Priority of the virtual router (1 - 255).	integer	Minimum value: 1 Maximum value: 255
adv-interval	Advertisement interval (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
start-time	Startup time (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
preempt	Enable/disable preempt mode. enable: Enable preempt mode. disable: Disable preempt mode.	option	-
accept-mode	Enable/disable accept mode. enable: Enable accept mode. disable: Disable accept mode.	option	-
vrdst	Monitor the route to this destination.	ipv4-address-any	Not Specified
vrdst-priority	Priority of the virtual router when the virtual router destination becomes unreachable (0 - 254).	integer	Minimum value: 0 Maximum value: 254
ignore-default-route	Enable/disable ignoring of default route when checking destination. enable: Enable ignoring of default route when checking destination. disable: Disable ignoring of default route when checking destination.	option	-
status	Enable/disable this VRRP configuration. enable: Enable this VRRP configuration. disable: Disable this VRRP configuration.	option	-

config proxy-arp

Parameter Name	Description	Type	Size
ip	Set IP addresses of proxy ARP.	user	Not Specified

config secondaryip

Parameter Name	Description	Type	Size
ip	Secondary IP address of the interface.	ipv4-classnet-host	Not Specified
allowaccess	Management access settings for the secondary IP address. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. radius-acct: RADIUS accounting access. probe-response: Probe access. fabric: Security Fabric access. ftm: FTM access.	option	-
gwdetect	Enable/disable detect gateway alive for first. enable: Enable detect gateway alive for first. disable: Disable detect gateway alive for first.	option	-
ping-serv-status	PING server status.	integer	Minimum value: 0 Maximum value: 255
detectserver	Gateway's ping server for this IP.	user	Not Specified
detectprotocol	Protocols used to detect the server. ping: PING. tcp-echo: TCP echo. udp-echo: UDP echo.	option	-
ha-priority	HA election priority for the PING server.	integer	Minimum value: 1 Maximum value: 50

config tagging

Parameter Name	Description	Type	Size
category	Tag category.	string	Maximum length: 63
tags `<name>`	Tags. Tag name.	string	Maximum length: 79

config egress-queues

Parameter Name	Description	Type	Size
cos0	CoS profile name for CoS 0.	string	Maximum length: 35
cos1	CoS profile name for CoS 1.	string	Maximum length: 35
cos2	CoS profile name for CoS 2.	string	Maximum length: 35
cos3	CoS profile name for CoS 3.	string	Maximum length: 35
cos4	CoS profile name for CoS 4.	string	Maximum length: 35
cos5	CoS profile name for CoS 5.	string	Maximum length: 35
cos6	CoS profile name for CoS 6.	string	Maximum length: 35
cos7	CoS profile name for CoS 7.	string	Maximum length: 35

config ipv6

Parameter Name	Description	Type	Size
ip6-mode	Addressing mode (static, DHCP, delegated). static: Static setting. dhcp: DHCPv6 client mode. pppoe: IPv6 over PPPoE mode. delegated: IPv6 address with delegated prefix.	option	-
nd-mode	Neighbor discovery mode. basic: Do not support SEND. SEND-compatible: Support SEND.	option	-
nd-cert	Neighbor discovery certificate.	string	Maximum length: 35
nd-security-level	Neighbor discovery security level (0 - 7; 0 = least secure, default = 0).	integer	Minimum value: 0 Maximum value: 7
nd-timestamp-delta	Neighbor discovery timestamp delta value (1 - 3600 sec; default = 300).	integer	Minimum value: 1 Maximum value: 3600
nd-timestamp-fuzz	Neighbor discovery timestamp fuzz factor (1 - 60 sec; default = 1).	integer	Minimum value: 1 Maximum value: 60
nd-cga-modifier	Neighbor discovery CGA modifier.	user	Not Specified
ip6-dns-server-override	Enable/disable using the DNS server acquired by DHCP. enable: Enable using the DNS server acquired by DHCP. disable: Disable using the DNS server acquired by DHCP.	option	-
ip6-address	Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx	ipv6-prefix	Not Specified
ip6-allowaccess	Allow management access to the interface. ping: PING access. https: HTTPS access. ssh: SSH access. snmp: SNMP access. http: HTTP access. telnet: TELNET access. fgfm: FortiManager access. fabric: Fabric access.	option	-
ip6-send-adv	Enable/disable sending advertisements about the interface. enable: Enable sending advertisements about this interface. disable: Disable sending advertisements about this interface.	option	-
ip6-manage-flag	Enable/disable the managed flag. enable: Enable the managed IPv6 flag. disable: Disable the managed IPv6 flag.	option	-
ip6-other-flag	Enable/disable the other IPv6 flag. enable: Enable the other IPv6 flag. disable: Disable the other IPv6 flag.	option	-
ip6-max-interval	IPv6 maximum interval (4 to 1800 sec).	integer	Minimum value: 4 Maximum value: 1800
ip6-min-interval	IPv6 minimum interval (3 to 1350 sec).	integer	Minimum value: 3 Maximum value: 1350
ip6-link-mtu	IPv6 link MTU.	integer	Minimum value: 1280 Maximum value: 16000
ip6-reachable-time	IPv6 reachable time (milliseconds; 0 means unspecified).	integer	Minimum value: 0 Maximum value: 3600000
ip6-retrans-time	IPv6 retransmit time (milliseconds; 0 means unspecified).	integer	Minimum value: 0 Maximum value: 4294967295
ip6-default-life	Default life (sec).	integer	Minimum value: 0 Maximum value: 9000
ip6-hop-limit	Hop limit (0 means unspecified).	integer	Minimum value: 0 Maximum value: 255
autoconf	Enable/disable address auto config. enable: Enable auto-configuration. disable: Disable auto-configuration.	option	-
ip6-upstream-interface	Interface name providing delegated information.	string	Maximum length: 15
ip6-subnet	Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx	ipv6-prefix	Not Specified
dhcp6-relay-service	Enable/disable DHCPv6 relay. disable: Disable DHCPv6 relay enable: Enable DHCPv6 relay.	option	-
dhcp6-relay-type	DHCPv6 relay type. regular: Regular DHCP relay.	option	-
dhcp6-relay-ip	DHCPv6 relay IP address.	user	Not Specified
dhcp6-client-options	DHCPv6 client options. rapid: Send rapid commit option. iapd: Send including IA-PD option. iana: Send including IA-NA option.	option	-
dhcp6-prefix-delegation	Enable/disable DHCPv6 prefix delegation. enable: Enable DHCPv6 prefix delegation. disable: Disable DHCPv6 prefix delegation.	option	-
dhcp6-information-request	Enable/disable DHCPv6 information request. enable: Enable DHCPv6 information request. disable: Disable DHCPv6 information request.	option	-
dhcp6-prefix-hint	DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server.	ipv6-network	Not Specified
dhcp6-prefix-hint-plt	DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time.	integer	Minimum value: 0 Maximum value: 4294967295
dhcp6-prefix-hint-vlt	DHCPv6 prefix hint valid life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
vrrp-virtual-mac6	Enable/disable virtual MAC for VRRP. enable: Enable virtual MAC for VRRP. disable: Disable virtual MAC for VRRP.	option	-
vrip6_link_local	Link-local IPv6 address of virtual router.	ipv6-address	Not Specified

config ip6-prefix-list

Parameter Name	Description	Type	Size
autonomous-flag	Enable/disable the autonomous flag. enable: Enable the autonomous flag. disable: Disable the autonomous flag.	option	-
onlink-flag	Enable/disable the onlink flag. enable: Enable the onlink flag. disable: Disable the onlink flag.	option	-
valid-life-time	Valid life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
preferred-life-time	Preferred life time (sec).	integer	Minimum value: 0 Maximum value: 4294967295
rdnss	Recursive DNS server option.	user	Not Specified
dnssl `<domain>`	DNS search list option. Domain name.	string	Maximum length: 79

config ip6-delegated-prefix-list

Parameter Name	Description	Type	Size
upstream-interface	Name of the interface that provides delegated information.	string	Maximum length: 15
autonomous-flag	Enable/disable the autonomous flag. enable: Enable the autonomous flag. disable: Disable the autonomous flag.	option	-
onlink-flag	Enable/disable the onlink flag. enable: Enable the onlink flag. disable: Disable the onlink flag.	option	-
subnet	Add subnet ID to routing prefix.	ipv6-network	Not Specified
rdnss-service	Recursive DNS service option. delegated: Delegated RDNSS settings. default: System RDNSS settings. specify: Specify recursive DNS servers.	option	-
rdnss	Recursive DNS server option.	user	Not Specified

config vrrp6

Parameter Name	Description	Type	Size
vrgrp	VRRP group ID (1 - 65535).	integer	Minimum value: 1 Maximum value: 65535
vrip6	IPv6 address of the virtual router.	ipv6-address	Not Specified
priority	Priority of the virtual router (1 - 255).	integer	Minimum value: 1 Maximum value: 255
adv-interval	Advertisement interval (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
start-time	Startup time (1 - 255 seconds).	integer	Minimum value: 1 Maximum value: 255
preempt	Enable/disable preempt mode. enable: Enable preempt mode. disable: Disable preempt mode.	option	-
accept-mode	Enable/disable accept mode. enable: Enable accept mode. disable: Disable accept mode.	option	-
vrdst6	Monitor the route to this destination.	ipv6-address	Not Specified
status	Enable/disable VRRP. enable: Enable VRRP. disable: Disable VRRP.	option	-

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

system interface

Configure interfaces.

config system interface

config vrrp

config proxy-arp

config secondaryip

config tagging

config egress-queues

config ipv6

config ip6-prefix-list

config ip6-delegated-prefix-list

config vrrp6

system interface