config router ospf6
Description: Configure IPv6 OSPF.
set abr-type [cisco|ibm|...]
set auto-cost-ref-bandwidth {integer}
set default-information-originate [enable|always|...]
set log-neighbour-changes [enable|disable]
set default-information-metric {integer}
set default-information-metric-type [1|2]
set default-information-route-map {string}
set default-metric {integer}
set router-id {ipv4-address-any}
set spf-timers {user}
set bfd [enable|disable]
config area
Description: OSPF6 area configuration.
edit <id>
set default-cost {integer}
set nssa-translator-role [candidate|never|...]
set stub-type [no-summary|summary]
set type [regular|nssa|...]
set nssa-default-information-originate [enable|disable]
set nssa-default-information-originate-metric {integer}
set nssa-default-information-originate-metric-type [1|2]
set nssa-redistribution [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config range
Description: OSPF6 area range configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
next
end
config virtual-link
Description: OSPF6 virtual link configuration.
edit <name>
set dead-interval {integer}
set hello-interval {integer}
set retransmit-interval {integer}
set transmit-delay {integer}
set peer {ipv4-address-any}
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
next
end
next
end
config ospf6-interface
Description: OSPF6 interface configuration.
edit <name>
set area-id {ipv4-address-any}
set interface {string}
set retransmit-interval {integer}
set transmit-delay {integer}
set cost {integer}
set priority {integer}
set dead-interval {integer}
set hello-interval {integer}
set status [disable|enable]
set network-type [broadcast|point-to-point|...]
set bfd [global|enable|...]
set mtu {integer}
set mtu-ignore [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config neighbor
Description: OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media
edit <ip6>
set poll-interval {integer}
set cost {integer}
set priority {integer}
next
end
next
end
config redistribute
Description: Redistribute configuration.
edit <name>
set status [enable|disable]
set metric {integer}
set routemap {string}
set metric-type [1|2]
next
end
set passive-interface <name1>, <name2>, ...
config summary-address
Description: IPv6 address summary configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
set tag {integer}
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| abr-type | Area border router type. cisco: Cisco. ibm: IBM. standard: Standard. |
option | - |
| auto-cost-ref-bandwidth | Reference bandwidth in terms of megabits per second. | integer | Minimum value: 1 Maximum value: 1000000 |
| default-information-originate | Enable/disable generation of default route. enable: Enable setting. always: Always advertise the default router. disable: Disable setting. |
option | - |
| log-neighbour-changes | Enable logging of OSPFv3 neighbour's changes enable: Enable setting. disable: Disable setting. |
option | - |
| default-information-metric | Default information metric. | integer | Minimum value: 1 Maximum value: 16777214 |
| default-information-metric-type | Default information metric type. 1: Type 1. 2: Type 2. |
option | - |
| default-information-route-map | Default information route map. | string | Maximum length: 35 |
| default-metric | Default metric of redistribute routes. | integer | Minimum value: 1 Maximum value: 16777214 |
| router-id | A.B.C.D, in IPv4 address format. | ipv4-address-any | Not Specified |
| spf-timers | SPF calculation frequency. | user | Not Specified |
| bfd | Enable/disable Bidirectional Forwarding Detection (BFD). enable: Enable Bidirectional Forwarding Detection (BFD). disable: Disable Bidirectional Forwarding Detection (BFD). |
option | - |
passive-interface <name> |
Passive interface configuration. Passive interface name. |
string | Maximum length: 79 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| default-cost | Summary default cost of stub or NSSA area. | integer | Minimum value: 0 Maximum value: 16777215 |
| nssa-translator-role | NSSA translator role type. candidate: Candidate. never: Never. always: Always. |
option | - |
| stub-type | Stub summary setting. no-summary: No summary. summary: Summary. |
option | - |
| type | Area type setting. regular: Regular. nssa: NSSA. stub: Stub. |
option | - |
| nssa-default-information-originate | Enable/disable originate type 7 default into NSSA area. enable: Enable originate type 7 default into NSSA area. disable: Disable originate type 7 default into NSSA area. |
option | - |
| nssa-default-information-originate-metric | OSPFv3 default metric. | integer | Minimum value: 0 Maximum value: 16777214 |
| nssa-default-information-originate-metric-type | OSPFv3 metric type for default routes. 1: Type 1. 2: Type 2. |
option | - |
| nssa-redistribution | Enable/disable redistribute into NSSA area. enable: Enable redistribute into NSSA area. disable: Disable redistribute into NSSA area. |
option | - |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefix6 | IPv6 prefix. | ipv6-network | Not Specified |
| advertise | Enable/disable advertise status. disable: disable enable: enable |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| dead-interval | Dead interval. | integer | Minimum value: 1 Maximum value: 65535 |
| hello-interval | Hello interval. | integer | Minimum value: 1 Maximum value: 65535 |
| retransmit-interval | Retransmit interval. | integer | Minimum value: 1 Maximum value: 65535 |
| transmit-delay | Transmit delay. | integer | Minimum value: 1 Maximum value: 65535 |
| peer | A.B.C.D, peer router ID. | ipv4-address-any | Not Specified |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. area: Use the routing area's authentication configuration. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| area-id | A.B.C.D, in IPv4 address format. | ipv4-address-any | Not Specified |
| interface | Configuration interface name. | string | Maximum length: 15 |
| retransmit-interval | Retransmit interval. | integer | Minimum value: 1 Maximum value: 65535 |
| transmit-delay | Transmit delay. | integer | Minimum value: 1 Maximum value: 65535 |
| cost | Cost of the interface, value range from 0 to 65535, 0 means auto-cost. | integer | Minimum value: 0 Maximum value: 65535 |
| priority | priority | integer | Minimum value: 0 Maximum value: 255 |
| dead-interval | Dead interval. | integer | Minimum value: 1 Maximum value: 65535 |
| hello-interval | Hello interval. | integer | Minimum value: 1 Maximum value: 65535 |
| status | Enable/disable OSPF6 routing on this interface. disable: Disable OSPF6 routing. enable: Enable OSPF6 routing. |
option | - |
| network-type | Network type. broadcast: broadcast point-to-point: point-to-point non-broadcast: non-broadcast point-to-multipoint: point-to-multipoint point-to-multipoint-non-broadcast: point-to-multipoint and non-broadcast. |
option | - |
| bfd | Enable/disable Bidirectional Forwarding Detection (BFD). global: Use global configuration of Bidirectional Forwarding Detection (BFD). enable: Enable Bidirectional Forwarding Detection (BFD) on this interface. disable: Disable Bidirectional Forwarding Detection (BFD) on this interface. |
option | - |
| mtu | MTU for OSPFv3 packets. | integer | Minimum value: 576 Maximum value: 65535 |
| mtu-ignore | Enable/disable ignoring MTU field in DBD packets. enable: Ignore MTU field in DBD packets. disable: Do not ignore MTU field in DBD packets. |
option | - |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. area: Use the routing area's authentication configuration. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| poll-interval | Poll interval time in seconds. | integer | Minimum value: 1 Maximum value: 65535 |
| cost | Cost of the interface, value range from 0 to 65535, 0 means auto-cost. | integer | Minimum value: 0 Maximum value: 65535 |
| priority | priority | integer | Minimum value: 0 Maximum value: 255 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | status enable: Enable setting. disable: Disable setting. |
option | - |
| metric | Redistribute metric setting. | integer | Minimum value: 0 Maximum value: 16777214 |
| routemap | Route map name. | string | Maximum length: 35 |
| metric-type | Metric type. 1: Type 1. 2: Type 2. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefix6 | IPv6 prefix. | ipv6-network | Not Specified |
| advertise | Enable/disable advertise status. disable: disable enable: enable |
option | - |
| tag | Tag value. | integer | Minimum value: 0 Maximum value: 4294967295 |
config router ospf6
Description: Configure IPv6 OSPF.
set abr-type [cisco|ibm|...]
set auto-cost-ref-bandwidth {integer}
set default-information-originate [enable|always|...]
set log-neighbour-changes [enable|disable]
set default-information-metric {integer}
set default-information-metric-type [1|2]
set default-information-route-map {string}
set default-metric {integer}
set router-id {ipv4-address-any}
set spf-timers {user}
set bfd [enable|disable]
config area
Description: OSPF6 area configuration.
edit <id>
set default-cost {integer}
set nssa-translator-role [candidate|never|...]
set stub-type [no-summary|summary]
set type [regular|nssa|...]
set nssa-default-information-originate [enable|disable]
set nssa-default-information-originate-metric {integer}
set nssa-default-information-originate-metric-type [1|2]
set nssa-redistribution [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config range
Description: OSPF6 area range configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
next
end
config virtual-link
Description: OSPF6 virtual link configuration.
edit <name>
set dead-interval {integer}
set hello-interval {integer}
set retransmit-interval {integer}
set transmit-delay {integer}
set peer {ipv4-address-any}
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
next
end
next
end
config ospf6-interface
Description: OSPF6 interface configuration.
edit <name>
set area-id {ipv4-address-any}
set interface {string}
set retransmit-interval {integer}
set transmit-delay {integer}
set cost {integer}
set priority {integer}
set dead-interval {integer}
set hello-interval {integer}
set status [disable|enable]
set network-type [broadcast|point-to-point|...]
set bfd [global|enable|...]
set mtu {integer}
set mtu-ignore [enable|disable]
set authentication [none|ah|...]
set key-rollover-interval {integer}
set ipsec-auth-alg [md5|sha1|...]
set ipsec-enc-alg [null|des|...]
config ipsec-keys
Description: IPsec authentication and encryption keys.
edit <spi>
set auth-key {password}
set enc-key {password}
next
end
config neighbor
Description: OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media
edit <ip6>
set poll-interval {integer}
set cost {integer}
set priority {integer}
next
end
next
end
config redistribute
Description: Redistribute configuration.
edit <name>
set status [enable|disable]
set metric {integer}
set routemap {string}
set metric-type [1|2]
next
end
set passive-interface <name1>, <name2>, ...
config summary-address
Description: IPv6 address summary configuration.
edit <id>
set prefix6 {ipv6-network}
set advertise [disable|enable]
set tag {integer}
next
end
end| Parameter Name | Description | Type | Size |
|---|---|---|---|
| abr-type | Area border router type. cisco: Cisco. ibm: IBM. standard: Standard. |
option | - |
| auto-cost-ref-bandwidth | Reference bandwidth in terms of megabits per second. | integer | Minimum value: 1 Maximum value: 1000000 |
| default-information-originate | Enable/disable generation of default route. enable: Enable setting. always: Always advertise the default router. disable: Disable setting. |
option | - |
| log-neighbour-changes | Enable logging of OSPFv3 neighbour's changes enable: Enable setting. disable: Disable setting. |
option | - |
| default-information-metric | Default information metric. | integer | Minimum value: 1 Maximum value: 16777214 |
| default-information-metric-type | Default information metric type. 1: Type 1. 2: Type 2. |
option | - |
| default-information-route-map | Default information route map. | string | Maximum length: 35 |
| default-metric | Default metric of redistribute routes. | integer | Minimum value: 1 Maximum value: 16777214 |
| router-id | A.B.C.D, in IPv4 address format. | ipv4-address-any | Not Specified |
| spf-timers | SPF calculation frequency. | user | Not Specified |
| bfd | Enable/disable Bidirectional Forwarding Detection (BFD). enable: Enable Bidirectional Forwarding Detection (BFD). disable: Disable Bidirectional Forwarding Detection (BFD). |
option | - |
passive-interface <name> |
Passive interface configuration. Passive interface name. |
string | Maximum length: 79 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| default-cost | Summary default cost of stub or NSSA area. | integer | Minimum value: 0 Maximum value: 16777215 |
| nssa-translator-role | NSSA translator role type. candidate: Candidate. never: Never. always: Always. |
option | - |
| stub-type | Stub summary setting. no-summary: No summary. summary: Summary. |
option | - |
| type | Area type setting. regular: Regular. nssa: NSSA. stub: Stub. |
option | - |
| nssa-default-information-originate | Enable/disable originate type 7 default into NSSA area. enable: Enable originate type 7 default into NSSA area. disable: Disable originate type 7 default into NSSA area. |
option | - |
| nssa-default-information-originate-metric | OSPFv3 default metric. | integer | Minimum value: 0 Maximum value: 16777214 |
| nssa-default-information-originate-metric-type | OSPFv3 metric type for default routes. 1: Type 1. 2: Type 2. |
option | - |
| nssa-redistribution | Enable/disable redistribute into NSSA area. enable: Enable redistribute into NSSA area. disable: Disable redistribute into NSSA area. |
option | - |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefix6 | IPv6 prefix. | ipv6-network | Not Specified |
| advertise | Enable/disable advertise status. disable: disable enable: enable |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| dead-interval | Dead interval. | integer | Minimum value: 1 Maximum value: 65535 |
| hello-interval | Hello interval. | integer | Minimum value: 1 Maximum value: 65535 |
| retransmit-interval | Retransmit interval. | integer | Minimum value: 1 Maximum value: 65535 |
| transmit-delay | Transmit delay. | integer | Minimum value: 1 Maximum value: 65535 |
| peer | A.B.C.D, peer router ID. | ipv4-address-any | Not Specified |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. area: Use the routing area's authentication configuration. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| area-id | A.B.C.D, in IPv4 address format. | ipv4-address-any | Not Specified |
| interface | Configuration interface name. | string | Maximum length: 15 |
| retransmit-interval | Retransmit interval. | integer | Minimum value: 1 Maximum value: 65535 |
| transmit-delay | Transmit delay. | integer | Minimum value: 1 Maximum value: 65535 |
| cost | Cost of the interface, value range from 0 to 65535, 0 means auto-cost. | integer | Minimum value: 0 Maximum value: 65535 |
| priority | priority | integer | Minimum value: 0 Maximum value: 255 |
| dead-interval | Dead interval. | integer | Minimum value: 1 Maximum value: 65535 |
| hello-interval | Hello interval. | integer | Minimum value: 1 Maximum value: 65535 |
| status | Enable/disable OSPF6 routing on this interface. disable: Disable OSPF6 routing. enable: Enable OSPF6 routing. |
option | - |
| network-type | Network type. broadcast: broadcast point-to-point: point-to-point non-broadcast: non-broadcast point-to-multipoint: point-to-multipoint point-to-multipoint-non-broadcast: point-to-multipoint and non-broadcast. |
option | - |
| bfd | Enable/disable Bidirectional Forwarding Detection (BFD). global: Use global configuration of Bidirectional Forwarding Detection (BFD). enable: Enable Bidirectional Forwarding Detection (BFD) on this interface. disable: Disable Bidirectional Forwarding Detection (BFD) on this interface. |
option | - |
| mtu | MTU for OSPFv3 packets. | integer | Minimum value: 576 Maximum value: 65535 |
| mtu-ignore | Enable/disable ignoring MTU field in DBD packets. enable: Ignore MTU field in DBD packets. disable: Do not ignore MTU field in DBD packets. |
option | - |
| authentication | Authentication mode. none: Disable authentication. ah: Authentication Header. esp: Encapsulating Security Payload. area: Use the routing area's authentication configuration. |
option | - |
| key-rollover-interval | Key roll-over interval. | integer | Minimum value: 300 Maximum value: 216000 |
| ipsec-auth-alg | Authentication algorithm. md5: MD5. sha1: SHA1. sha256: SHA256. sha384: SHA384. sha512: SHA512. |
option | - |
| ipsec-enc-alg | Encryption algorithm. null: No encryption. des: DES. 3des: 3DES. aes128: AES128. aes192: AES192. aes256: AES256. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| auth-key | Authentication key. | password | Not Specified |
| enc-key | Encryption key. | password | Not Specified |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| poll-interval | Poll interval time in seconds. | integer | Minimum value: 1 Maximum value: 65535 |
| cost | Cost of the interface, value range from 0 to 65535, 0 means auto-cost. | integer | Minimum value: 0 Maximum value: 65535 |
| priority | priority | integer | Minimum value: 0 Maximum value: 255 |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| status | status enable: Enable setting. disable: Disable setting. |
option | - |
| metric | Redistribute metric setting. | integer | Minimum value: 0 Maximum value: 16777214 |
| routemap | Route map name. | string | Maximum length: 35 |
| metric-type | Metric type. 1: Type 1. 2: Type 2. |
option | - |
| Parameter Name | Description | Type | Size |
|---|---|---|---|
| prefix6 | IPv6 prefix. | ipv6-network | Not Specified |
| advertise | Enable/disable advertise status. disable: disable enable: enable |
option | - |
| tag | Tag value. | integer | Minimum value: 0 Maximum value: 4294967295 |