system automation-trigger
Use this command to configure the triggers in the Automation feature.
To use this command, your administrator account’s access control profile must have either w or rw permission to the mntgrp area. For details, see Permissions.
Syntax
config system automation-trigger
edit <trigger_name>
set comments <string>
set trigger-type event_based
set event-type {high-cpu | event-log | reboot | HA}
set logid <int>
config fields
edit <index>
set name <string>
set value <string>
next
end
next
end
| Variable | Description | Default |
|
<trigger_name> |
Enter a name for the trigger. | No default. |
|
comments <string> |
Enter a description for the trigger. |
No default. |
|
trigger-type event_based |
Now we only support event_based trigger. | event_based |
|
set event-type {high-cpu | event-log | reboot | HA} |
Select the type of the event for the trigger. FortiWeb will take action when the specified event occurs.
|
No default. |
|
If the |
||
|
logid |
Enter the id of the event log. |
No default. |
|
<index> |
Enter the index of the filter to filter out specific event logs. |
No default. |
|
name <string> |
The name of the log field to be used to filter out certain logs. |
No default. |
|
value <string> |
The value of the log field to be used to filter out certain logs. |
No default. |
Related topics