Introduction
FortiToken Mobile allows you to generate one-time password (OTP) values on your mobile device for use in two-factor authentication. Once your token is activated, you will not need any network access to generate OTPs on your device.
Overview
The FortiToken Mobile application supports three platforms: iOS, Android, and Windows.
FortiToken Mobile for iOS and FortiToken Mobile for Android support localization in English, Spanish, German, French, Portuguese, Japanese, Simplified Chinese, and Traditional Chinese. FortiToken for Windows is only available in English.
After installing FortiToken Mobile on your device, you will need to activate a token. Once activated, you can immediately generate OTPs on your device. You can manually enter the OTP or approve or deny the remote access login request from push notifications.
If an old mobile device doesn’t work or is lost, you can transfer the activated token to a new device without activation of a new token.
Supported Versions and Devices
FortiToken Mobile for iOS can be installed on iPad, iPhone, and Apple Watch with iOS 12.0 or later.
FortiToken Mobile for Android can be installed on all Android devices with Android 10 or later.
FortiToken for Windows can be installed on Windows 10 and later devices.
No cellular network is required. If cellular service is not available, use Wi-Fi access.
There are differences in the interface for each of these versions.
Menus and options may vary slightly depending on the platform you are using.