FortiSIEM Version Compatibility for Rocky Linux Based Releases
This table describes FortiSIEM installation versions which have been tested and confirmed to work.
Notes:
-
FortiSIEM Manager, introduced in FortiSIEM 6.5.0, requires that the FortiSIEM Manager version be greater or equal to its Supervisor instances.
-
In general, Collectors can be on older versions than the Supervisor. However, to take advantage of enhancements, the Collector and Supervisor must be on the same version.
FortiSIEM Super/Worker |
FortiSIEM Manager |
FortiSIEM Collector |
MEA Collector / FortiAnalyzer | Windows Agent |
Linux Agent |
Elasticsearch | AWS EC2 Instance Type |
ESX | HyperV | Hardware Appliance |
---|---|---|---|---|---|---|---|---|---|---|
6.5.3 | 6.5.3 | <= 6.5.3 | MEA Collector: <= 6.5.3 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.5.3 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000G, 2000F, 500G, 500F |
6.5.2 |
|
<= 6.5.2 | MEA Collector: <= 6.5.2 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.5.2 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000G, 2000F, 500G, 500F |
6.5.1 |
|
<= 6.5.1 | MEA Collector: <= 6.5.1 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.5.1 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000G, 2000F, 500G, 500F |
6.5.0 |
|
<= 6.5.0 | MEA Collector: <= 6.5.0 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.5.0 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000G, 2000F, 500G, 500F |
6.4.4 | Not Supported |
<= 6.4.4 | MEA Collector: <= 6.4.4 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.4.4 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000F, 500F |
6.4.3 | Not Supported |
<= 6.4.3 | MEA Collector: <= 6.4.3 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.4.3 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000F, 500F |
6.4.2 | Not Supported |
<= 6.4.2 | MEA Collector: <= 6.4.2 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.4.2 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000F, 500F |
6.4.1 | Not Supported |
<= 6.4.1 | MEA Collector: <= 6.4.1 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.4.1 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000F, 500F |
6.4.0 | Not Supported |
<= 6.4.0 | MEA Collector: <= 6.4.0 FortiAnalyzer: 7.0.1 - 7.2.2 |
3.1.x-3.3.x, 4.0.x, 4.1.0-4.1.6, 4.2.x, 4.3.x, 4.4.x | 5.3.0 - 6.4.0 | 5.6-6.8, 7.8, 7.12.1, 7.15.1 | C3, C4, M3, M4, M5 | <= 6.5* >= 6.7 Update 2 recommended |
>= 2012 R2 | 3500G, 3500F, 2000F, 500F |
Note: Collectors that were registered to a FortiSIEM Super prior to 5.x will continue to work with a FortiSIEM 6.1.x release. 5.x Collectors that are deployed or registered after an upgrade to FortiSIEM 6.1.x will not work.
**Some Windows Agent 4.4.x, Windows Agent 4.3.x and Windows Agent 4.2.x features are only supported on FortiSIEM 6.4.0 or later.
*Support for 6.5 and earlier releases of ESX can be achieved with additional steps detailed in the appropriate ESX Guide.
6.4.0 VMWare ESX Installation Guide
6.4.1 VMWare ESX Installation Guide
6.4.2 VMWare ESX Installation Guide
6.4.3 VMWare ESX Installation Guide
6.4.4 VMWare ESX Installation Guide
6.5.0 VMWare ESX Installation Guide
6.5.1 VMWare ESX Installation Guide