Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

FortiClient EMS Devices

For more information on how to configure FortiClient EMS to send files to FortiSandbox, please refer to the FortiClient EMS Administration Guide available in the Fortinet Document Library.

To edit EMS settings in FortiSandbox:
  1. On your FortiSandbox device, go to Scan Input > Device.
  2. Click the device name. The Edit Device Settings page opens.
  3. Edit the following settings:

    Device Status

     

      Serial Number

    The device serial number is displayed.

     

    Hostname

    The host name of the EMS unit. This is a read-only value.

     

    IP

    The IP address of the EMS is displayed.

     

    Status

    The status of the device, either connected or not connected. This field cannot be edited.

     

    Last Modified

    The date and time that the EMS settings were last changed is displayed.

     

    Last Seen

    The date and time that the EMS last connected to the FortiSandbox is displayed.

    Permissions

     

     

    Authorized

    Select the checkbox to authorize the EMS device. All FortiClient endpoints that are managed by EMS will inherit this authorization setting.

     

    Submission Limitation

    Limit submission speed of FortiClient endpoints that are managed by EMS. Specify the number of submissions per Hour, Day, or Unlimited. When limitation is reached, FortiSandbox will send a signal to FortiClient to stop file submission. This will save resources on both sides.

  4. Click OK to save the settings.

FortiClient EMS Devices

For more information on how to configure FortiClient EMS to send files to FortiSandbox, please refer to the FortiClient EMS Administration Guide available in the Fortinet Document Library.

To edit EMS settings in FortiSandbox:
  1. On your FortiSandbox device, go to Scan Input > Device.
  2. Click the device name. The Edit Device Settings page opens.
  3. Edit the following settings:

    Device Status

     

      Serial Number

    The device serial number is displayed.

     

    Hostname

    The host name of the EMS unit. This is a read-only value.

     

    IP

    The IP address of the EMS is displayed.

     

    Status

    The status of the device, either connected or not connected. This field cannot be edited.

     

    Last Modified

    The date and time that the EMS settings were last changed is displayed.

     

    Last Seen

    The date and time that the EMS last connected to the FortiSandbox is displayed.

    Permissions

     

     

    Authorized

    Select the checkbox to authorize the EMS device. All FortiClient endpoints that are managed by EMS will inherit this authorization setting.

     

    Submission Limitation

    Limit submission speed of FortiClient endpoints that are managed by EMS. Specify the number of submissions per Hour, Day, or Unlimited. When limitation is reached, FortiSandbox will send a signal to FortiClient to stop file submission. This will save resources on both sides.

  4. Click OK to save the settings.