config ztna reverse-connector
Configure ZTNA Reverse-Connector.
config ztna reverse-connector
Description: Configure ZTNA Reverse-Connector.
edit <name>
set status [enable|disable]
set address {string}
set port {integer}
set health-check-interval {integer}
set ssl-max-version [tls-1.1|tls-1.2|...]
set certificate {string}
set trusted-server-ca {string}
next
end
config ztna reverse-connector
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
name |
Reverse connector name |
string |
Maximum length: 35 |
|
||||||||
|
status |
Reverse connector status. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
address |
Reverse connector adress(IP or FQDN). |
string |
Maximum length: 255 |
|
||||||||
|
port |
Port number that traffic uses to connect to remote server. |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||
|
health-check-interval |
Health check interval in seconds. |
integer |
Minimum value: 0 Maximum value: 600 |
60 |
||||||||
|
ssl-max-version |
Highest TLS version acceptable from a server. |
option |
- |
tls-1.3 |
||||||||
|
|
|
|||||||||||
|
certificate |
The name of the certificate to use for SSL handshake. |
string |
Maximum length: 35 |
|
||||||||
|
trusted-server-ca |
Trusted Server CA certificate used by SSL connection. |
string |
Maximum length: 79 |
|
||||||||