FortiSwitch dynamic port policies

To create a FortiSwitch dynamic port policy:

1. Go to FortiSwitch Manager > Port Policies > Dynamic Port Policies.
2. Click Create New. The Create New Dynamic Port Policy pane opens.
3. Enter a name for the dynamic port policy.
4. In the Policy Information section, click Create New. The Create New Dynamic Port Policy Rule pane opens.
5. Enter the following information, and click OK to save the dynamic port policy rule.

   Name	Enter a unique name for the dynamic port policy rule.
   Status	Set the rule to Enabled or Disabled.
   Description	Optionally, enter a description for the rule.
   Device Patterns
   MAC Address	Enable or disable matching a MAC address, then enter a MAC address.
   Host	Enable or disable matching a host address, then enter a host address.
   Hardware Vendor	Enable or disable matching a hardware vendor, then enter a hardware vendor name.
   Device Family	Enable or disable matching a device family, then enter a device family name.
   Type	Enable or disable matching a device type, then enter a device type.
   Switch Controller Action
   LLDP Profile	Enable to select an LLDP profile for the switch controller action.
   QoS Policy	Enable to select a QoS policy for the switch controller action.
   802.1X Policy	Enable to select an 802.1X policy for the switch controller action.
   VLAN Policy	Enable to select a QoS policy for the switch controller action.

6. Click OK to save the dynamic port policy.

   The dynamic port policy can now be used in a FortiSwitch template. See Creating FortiSwitch templates.