SNMP v3 users
The FortiManager SNMP v3 implementation includes support for queries, traps, authentication, and privacy. SNMP v3 users can be created, edited, and deleted as required.
To create a new SNMP user:
-
Go to System Settings > Network.
-
In the SNMP section, ensure the SNMP agent is enabled.
-
In the SNMP v3 section, click Create New in the toolbar. The New SNMP User pane opens.
-
Configure the following options, then click OK to create the community.
User Name
The name of the SNMP v3 user.
Security Level
The security level of the user. Select one of the following:
No Authentication, No Privacy
Authentication, No Privacy: Select the Authentication Algorithm (MD5, SHA, SHA224, SHA256, SHA384, SHA512) and enter the password.
Authentication, Privacy: Select the Authentication Algorithm (MD5, SHA, SHA224, SHA256, SHA384, SHA512), the Private Algorithm (AES, AES256, AES256CISCO, DES), and enter the passwords.
Queries
Select to enable queries then enter the port number. The default port is 161.
Notification Hosts
The IP address or addresses of the host. Click the add icon to add multiple IP addresses.
SNMP Event
Enable the events that will cause SNMP traps to be sent to the SNMP manager.
Interface IP changed
Log disk space low
CPU Overuse
Memory Low
System Restart
CPU usage exclude NICE threshold
HA Failover
RAID Event (only available for devices that support RAID)
Power Supply Failed (only available on supported hardware devices)
Fan Speed Out of Range
Temperature Out of Range
Voltage Out of Range
FortiAnalyzer feature set SNMP events:
High licensed device quota
High licensed log GB/day
Log Alert
Log Rate
Log Data Rate
To edit an SNMP user:
-
Go to System Settings > Network.
-
In the SNMP v3 section, double-click on a user, right-click on a user then select Edit, or select a user then click Edit in the toolbar. The Edit SNMP User pane opens.
-
Edit the settings as required, then click OK to apply your changes.
To delete an SNMP user or users:
-
Go to System Settings > Network.
-
In the SNMP v3 section, select the user or users you need to delete.
-
Click Delete in the toolbar, or right-click and select Delete.
-
Click OK in the confirmation dialog box to delete the selected user or users.