Getting started

This section explains how to get started with a FortiGate.

For the latest information about FortiOS 7.4, see the latest patch version of the Administration Guide.

Differences between models

Not all FortiGates have the same features, particularly entry-level models (models 30 to 90). A number of features on these models are only available in the CLI.

Consult your model's QuickStart Guide, hardware manual, or the Feature / Platform Matrix for further information about features that vary by model.

FortiGate models differ principally by the names used and the features available:

• Naming conventions may vary between FortiGate models. For example, on some models the hardware switch interface used for the local area network is called lan, while on other units it is called internal.
• Certain features are not available on all models. Additionally, a particular feature may be available only through the CLI on some models, while that same feature may be viewed in the GUI on other models.

  If you believe your FortiGate model supports a feature that does not appear in the GUI, go to System > Feature Visibility and confirm that the feature is enabled. For more information, see Feature visibility.

Low encryption models

Some FortiGate models support a low encryption (LENC) license. With an LENC license, FortiGate devices are considered low encryption models and are identified by LENC, for example FG-100E-LENC.

LENC models cannot use or inspect high encryption protocols, such as 3DES and AES. LENC models only use 56-bit DES encryption to work with SSL VPN and IPsec VPN, and they are unable to perform SSL inspection.

For a list of FortiGate models that support an LENC license, see FortiGate LENC Models.